From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/dlink/DLINKSW-LBD-MIB | 384 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 384 insertions(+) create mode 100644 MIBS/dlink/DLINKSW-LBD-MIB (limited to 'MIBS/dlink/DLINKSW-LBD-MIB') diff --git a/MIBS/dlink/DLINKSW-LBD-MIB b/MIBS/dlink/DLINKSW-LBD-MIB new file mode 100644 index 0000000..2e21b4b --- /dev/null +++ b/MIBS/dlink/DLINKSW-LBD-MIB @@ -0,0 +1,384 @@ +-- ***************************************************************** +-- DLINKSW-LBD-MIB.mib : Loopback Detection MIB +-- +-- Copyright (c) 2014 D-Link Corporation, all rights reserved. +-- +-- ***************************************************************** + + DLINKSW-LBD-MIB DEFINITIONS ::= BEGIN + + IMPORTS + MODULE-IDENTITY,OBJECT-TYPE,NOTIFICATION-TYPE + FROM SNMPv2-SMI + DisplayString,TruthValue FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP FROM SNMPv2-CONF + InterfaceIndex FROM IF-MIB + VlanId FROM Q-BRIDGE-MIB + Dlink2kVlanList FROM DLINKSW-TC-MIB + dlinkIndustrialCommon FROM DLINK-ID-REC-MIB; + + + dlinkSwLoopbackDetectMIB MODULE-IDENTITY + LAST-UPDATED "201410270000Z" + ORGANIZATION "D-Link Corp." + CONTACT-INFO + " D-Link Corporation + + Postal: No. 289, Sinhu 3rd Rd., Neihu District, + Taipei City 114, Taiwan, R.O.C + Tel: +886-2-66000123 + E-mail: tsd@dlink.com.tw + " + DESCRIPTION + "This MIB module defines objects for loopback detection." + + REVISION "201410270000Z" + DESCRIPTION + "Add node dLbdAddressType." + + REVISION "201310230000Z" + DESCRIPTION + "Add node dLbdActMode, dLbdNotifyEnabled and dLbdNotifyInfo." + + REVISION "201302050000Z" + DESCRIPTION + "This is the first version of the MIB file for 'loopback + detection' functionality." + ::= { dlinkIndustrialCommon 46 } + +-- ----------------------------------------------------------------------------- + dLbdNotifications OBJECT IDENTIFIER ::= { dlinkSwLoopbackDetectMIB 0 } + dLbdObjects OBJECT IDENTIFIER ::= { dlinkSwLoopbackDetectMIB 1 } + dLbdConformance OBJECT IDENTIFIER ::= { dlinkSwLoopbackDetectMIB 2 } + + dLbdCtrlInterval OBJECT-TYPE + SYNTAX INTEGER (1..32767) + UNITS "seconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the interval in seconds at which LBD + packets are transmitted." + ::= { dLbdObjects 1 } + + dLbdCtrlGlobalEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether the loopback detection is enabled + globally. + " + ::= { dLbdObjects 2 } + + dLbdCtrlMode OBJECT-TYPE + SYNTAX INTEGER { + portBased(1), + vlanBased(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the loopback detection mode. + portBased(1) - The loopback detection works in port-based mode. + vlanBased(2) - The loopback detection works in vlan-based mode." + ::= { dLbdObjects 3 } + + dLbdActMode OBJECT-TYPE + SYNTAX INTEGER { + shutdown(1), + none(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the loopback detection action mode. + shundown(1) - When loop has been detected, the port will be shut down (disabled) + in port-based mode, the traffic will be block on specific VLAN in VLAN-based mode. + This is the default value. + none(2) - When loop has been detected, the port will NOT be disabled in + port-based mode, the traffic will NOT be block on specific VLAN in + VLAN-based mode. Just send log and trap." + ::= { dLbdObjects 6 } + + dLbdNotifyEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set to 'true' to enable global SNMP notification for loopback detection feature. + Setting the object to 'false' will disable SNMP notifications." + ::= { dLbdObjects 7} + + dLbdIfCfgTable OBJECT-TYPE + SYNTAX SEQUENCE OF DLbdIfCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "A list of loopback detection information entries." + ::= { dLbdObjects 4 } + + dLbdAddressType OBJECT-TYPE + SYNTAX INTEGER { + multicast(1), + broadcast(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates the CTP packet's DA type. + multicast(1) - Only multicast CTP packet will be sent.The CTP packet's DA is CF-00-00-00-00-00. + broadcast(2) - Only broadcast CTP packet will be sent.The CTP packet's DA is FF-FF-FF-FF-FF-FF." + ::= { dLbdObjects 9 } + + dLbdIfCfgEntry OBJECT-TYPE + SYNTAX DLbdIfCfgEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry indicates the setting of loopback detection on an + interface." + INDEX { dLbdIfCfgIndex } + ::= { dLbdIfCfgTable 1 } + + DLbdIfCfgEntry ::= SEQUENCE { + dLbdIfCfgIndex InterfaceIndex, + dLbdIfCfgEnabled TruthValue, + dLbdIfLoopStatus INTEGER, + dLbdIfLoopVlans DisplayString + } + + dLbdIfCfgIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This object indicates the ifIndex of the physical port or port + channel." + ::= { dLbdIfCfgEntry 1 } + + dLbdIfCfgEnabled OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object indicates whether the loopback detection is enabled on + the interface. + " + ::= { dLbdIfCfgEntry 2 } + + dLbdIfLoopStatus OBJECT-TYPE + SYNTAX INTEGER { + normal(1), + loop(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates whether the interface loopback status." + ::= { dLbdIfCfgEntry 3 } + + dLbdIfLoopVlans OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object indicates the VLAN list that has detected a loopback." + ::= { dLbdIfCfgEntry 4 } + +-- ---------------------------------------------------------------------------- + dLbdVlanCtrlObjects OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This identifier defines a subtree under which a set of objects are + defined to enable loopback detection on specific VLANs. That is, + LBD Control packet will be sent out for the VLAN that the port has + the membership and within the specified VLAN list (the correspondig + bit is '1'). + When enabled VLAN ID list is empty, that is both dLbdVlanCrlFirst2K + and dLbdVlanCrlSecond2K are zero lenth string, LBD Control packet + is sent out for all VLANs that the port has the membership." + ::= { dLbdObjects 5 } + + dLbdVlanCrlFirst2K OBJECT-TYPE + SYNTAX Dlink2kVlanList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the loopback detection enabled VLAN in a + string of octets containing one bit per VLAN for VLANs 1 to 2048. + If the bit is set to '1', then the VLAN is enabled for loopback + detection." + ::= { dLbdVlanCtrlObjects 1 } + + dLbdVlanCrlSecond2K OBJECT-TYPE + SYNTAX Dlink2kVlanList + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the loopback detection enabled VLAN in a + string of octets containing one bit per VLAN for VLANs 2049 to 4095. + If the bit is set to '1', then the VLAN is enabled for loopback + detection." + ::= { dLbdVlanCtrlObjects 2 } + +-- ----------------------------------------------------------------------------- + +-- ----------------------------------------------------------------------------- + dLbdNotifyInfo OBJECT-IDENTITY + STATUS current + DESCRIPTION + "This identifier is a group for variable bindings for traps." + ::= { dLbdObjects 8 } + + dLbdNotifyInfoIfIndex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object indicates the interface id that has detected a loopback." + ::= { dLbdNotifyInfo 1 } + + dLbdNotifyInfoVlanId OBJECT-TYPE + SYNTAX VlanId + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This object indicates the vlan id that has detected a loopback." + ::= { dLbdNotifyInfo 2 } + +-- ----------------------------------------------------------------------------- + +-- ----------------------------------------------------------------------------- +-- MIB Notifications statements +-- ----------------------------------------------------------------------------- + dLbdLoopOccurred NOTIFICATION-TYPE + OBJECTS { + dLbdNotifyInfoIfIndex + } + STATUS current + DESCRIPTION + "This trap is sent when an interface loop occurs." + ::= { dLbdNotifications 1 } + + dLbdLoopRestart NOTIFICATION-TYPE + OBJECTS { + dLbdNotifyInfoIfIndex + } + STATUS current + DESCRIPTION + "This trap is sent when an interface loop restarts after the interval time." + ::= { dLbdNotifications 2 } + + dLbdVlanLoopOccurred NOTIFICATION-TYPE + OBJECTS { + dLbdNotifyInfoIfIndex, + dLbdNotifyInfoVlanId + } + STATUS current + DESCRIPTION + "This trap is sent when an interface with a VID loop occurs." + ::= { dLbdNotifications 3 } + + dLbdVlanLoopRestart NOTIFICATION-TYPE + OBJECTS { + dLbdNotifyInfoIfIndex, + dLbdNotifyInfoVlanId + } + STATUS current + DESCRIPTION + "This trap is sent when an interface loop with a VID restarts after the interval time." + ::= { dLbdNotifications 4 } + +-- ----------------------------------------------------------------------------- +-- MIB Conformance statements +-- ----------------------------------------------------------------------------- + dLbdMIBCompliances OBJECT IDENTIFIER + ::= { dLbdConformance 1 } + + dLbdMIBGroups OBJECT IDENTIFIER + ::= { dLbdConformance 2 } + + dLbdMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for entities which implement the + DLINKSW-LBD-MIB." + MODULE -- this module + MANDATORY-GROUPS { + dLbdCfgGroup, + dLbdIfCfgGroup + } + + GROUP dLbdCtrlModeGroup + DESCRIPTION + "This group is mandatory if vlan-based mode is supported." + + GROUP dLbdVlanCtrlGroup + DESCRIPTION + "This group is mandatory if vlan-based mode is supported." + + ::= { dLbdMIBCompliances 1 } +-- ----------------------------------------------------------------------------- + dLbdCfgGroup OBJECT-GROUP + OBJECTS { + dLbdCtrlInterval, + dLbdCtrlGlobalEnabled, + dLbdActMode, + dLbdNotifyEnabled, + dLbdNotifyInfoIfIndex, + dLbdNotifyInfoVlanId, + dLbdAddressType + } + STATUS current + DESCRIPTION + "A collection of objects providing management of the loopback + detection feature." + ::= { dLbdMIBGroups 1 } + + dLbdIfCfgGroup OBJECT-GROUP + OBJECTS { + dLbdIfCfgEnabled, + dLbdIfLoopStatus, + dLbdIfLoopVlans + } + STATUS current + DESCRIPTION + "A collection of objects providing the per-interface control of + loopback detection." + ::= { dLbdMIBGroups 2 } + + dLbdCtrlModeGroup OBJECT-GROUP + OBJECTS { + dLbdCtrlMode + } + STATUS current + DESCRIPTION + "A collection of objects providing the mode of loopback detection." + ::= { dLbdMIBGroups 3 } + + dLbdVlanCtrlGroup OBJECT-GROUP + OBJECTS { + dLbdVlanCrlFirst2K, + dLbdVlanCrlSecond2K + } + STATUS current + DESCRIPTION + "A collection of objects providing the VLAN list of loopback + detection." + ::= { dLbdMIBGroups 4 } + + dLbdNotificationGroup NOTIFICATION-GROUP + NOTIFICATIONS { + dLbdLoopOccurred, + dLbdLoopRestart, + dLbdVlanLoopOccurred, + dLbdVlanLoopRestart + } + STATUS current + DESCRIPTION + "A collection of notifications used for monitoring the hosts under the + control of loopback detection." + ::= { dLbdMIBGroups 5 } + +END -- cgit v1.2.3