From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cisco/SA-MTA-MIB | 144 ++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 144 insertions(+) create mode 100644 MIBS/cisco/SA-MTA-MIB (limited to 'MIBS/cisco/SA-MTA-MIB') diff --git a/MIBS/cisco/SA-MTA-MIB b/MIBS/cisco/SA-MTA-MIB new file mode 100644 index 0000000..0b1d548 --- /dev/null +++ b/MIBS/cisco/SA-MTA-MIB @@ -0,0 +1,144 @@ +--************************************************************************** +-- +-- Copyright 2010 Scientific Atlanta, A Cisco Company +-- All Rights Reserved +-- No portions of this material may be reproduced in any +-- form without the written permission of: +-- Scientific Atlanta, A Cisco Company +-- 5030 Sugarloaf Pkwy +-- Lawrenceville, Georgia 30044 +-- +--************************************************************************** + +SA-MTA-MIB DEFINITIONS ::= BEGIN +IMPORTS + MODULE-IDENTITY, + OBJECT-TYPE, + enterprises, + Integer32, + Unsigned32 + FROM SNMPv2-SMI + ifIndex + FROM IF-MIB + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + TruthValue, + DateAndTime + FROM SNMPv2-TC ; + +sa OBJECT IDENTIFIER ::= { enterprises 1429 } +saVoip OBJECT IDENTIFIER ::= { sa 78 } + +saMta MODULE-IDENTITY + LAST-UPDATED "201611100000Z" + ORGANIZATION "Cisco Inc." + CONTACT-INFO "vveeraga@cisco.com" + DESCRIPTION + "saMtaDevLCSSignalingSupport controls the LCS Signaling." + + -- History + REVISION "201611100000Z" + DESCRIPTION + "Initial release of reduced-set module for releases based on BFC 5.7.x." + + ::= { saVoip 3 } + + +-- MTA Device +saMtaDevice OBJECT IDENTIFIER ::= { saMta 1 } +saMtaDevOffHookWarnTOBusy OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object configures whether an endpoint should ring off-hook warning tone. + When this feature is disabled(0), Endpoint should ring off-hook warning tone. + When this feature is enabled(1), Endpoint should ring busy tone instead of off-hook warning tone. + The default value of this object is disabled(0)." + DEFVAL { 0 } + ::= { saMtaDevice 61 } + +-- ========================== +-- ENDPOINT TABLE STARTS HERE +-- ========================== + +saMtaEndPointTable OBJECT-TYPE + SYNTAX SEQUENCE OF SaMtaEndPointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table describes the MTA EndPoint + Volume configuration. " + ::= { saMta 2 } + +saMtaEndPointEntry OBJECT-TYPE + SYNTAX SaMtaEndPointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " List of attributes for a single MTA endpoint interface." + INDEX { ifIndex } + ::= { saMtaEndPointTable 1 } + +SaMtaEndPointEntry ::= SEQUENCE { + saMtaEndPntHookFlashMinTime INTEGER, + saMtaEndPntHookFlashMaxTime INTEGER, + saMtaEndPntStatePhysical INTEGER, + saMtaEndPntStateLogical INTEGER + } + +saMtaEndPntHookFlashMinTime OBJECT-TYPE + SYNTAX INTEGER (40..2000) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Shortest onhook time at which hook-flash event will be detected, in miliseconds. + Breaks in loop current with shorter duration are assumed to be noise and are ignored." + ::= { saMtaEndPointEntry 1 } + +saMtaEndPntHookFlashMaxTime OBJECT-TYPE + SYNTAX INTEGER (100..2000) + UNITS "milliseconds" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Longest onhook time at which hook-flash event will be detected, + in miliseconds. If onhook time is longer then saMtaHookFlashMaxTime, + hang up event will be detected." + ::= { saMtaEndPointEntry 2 } + +saMtaEndPntStatePhysical OBJECT-TYPE + SYNTAX INTEGER { + onHook(1), + offHook(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Returns the physical state of the end point. + 1: No phones attached or one or more phones are attached and + on-hook + 2: One or more phones are attached and off-hook" + ::= { saMtaEndPointEntry 6 } + +saMtaEndPntStateLogical OBJECT-TYPE + SYNTAX INTEGER { + connectedIdle(1), + disconnected(2), + inCallVoice(3), + inCallData(4) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Returns the logical state of the end point. + 1: endpoint is connected to CMS and not in call + 2: endpoint is not connected to CMS + 3: endpoint is in voice mode call + 4: endpoint is in data mode (fax/modem) call" + ::= { saMtaEndPointEntry 7 } +END -- cgit v1.2.3