From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cisco/CISCOSB-BONJOUR-MIB | 383 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 383 insertions(+) create mode 100644 MIBS/cisco/CISCOSB-BONJOUR-MIB (limited to 'MIBS/cisco/CISCOSB-BONJOUR-MIB') diff --git a/MIBS/cisco/CISCOSB-BONJOUR-MIB b/MIBS/cisco/CISCOSB-BONJOUR-MIB new file mode 100644 index 0000000..5f83712 --- /dev/null +++ b/MIBS/cisco/CISCOSB-BONJOUR-MIB @@ -0,0 +1,383 @@ +CISCOSB-BONJOUR-MIB DEFINITIONS ::= BEGIN + +IMPORTS + + OBJECT-TYPE, + MODULE-IDENTITY FROM SNMPv2-SMI + TEXTUAL-CONVENTION, DisplayString, RowStatus FROM SNMPv2-TC + InetAddress, InetAddressType FROM INET-ADDRESS-MIB + InterfaceIndex FROM IF-MIB + switch001 FROM CISCOSB-MIB; + + + +rlBonjour MODULE-IDENTITY + LAST-UPDATED "200909210001Z" + ORGANIZATION "Cisco Systems, Inc." + + CONTACT-INFO + "Postal: 170 West Tasman Drive + San Jose , CA 95134-1706 + USA + + + Website: Cisco Small Business Support Community " + + DESCRIPTION + "The private MIB module definition for Bonjour protocol." + REVISION "200904230000Z" + DESCRIPTION + "Initial revision." + ::= { switch001 114 } + +-- ------------------------------------------------------------- +-- global scalar +-- ------------------------------------------------------------- + +rlBonjourPublish OBJECT-TYPE + SYNTAX INTEGER { + enable (1), + disable (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Bonjour publishing." + + + ::= {rlBonjour 1 } + + +-- ------------------------------------------------------------- +-- Textual Conventions +-- ------------------------------------------------------------- + + +RlBonjourServiceState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Bonjour service status - (per IP interface)." + SYNTAX INTEGER { + rlBonjourNotPublished(0), + rlBonjourInactive(1), + rlBonjourRegistering(2), + rlBonjourRunning(3) +} + +RlBonjourOperationState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Bonjour service an L2 interface operation state." + SYNTAX INTEGER { + up(1), + down(2) +} + +RlBonjourOperationReason ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Bonjour service an L2 interface operation state." + SYNTAX INTEGER { + notExclude(0), + include(1), + notInclude(2), + exclude(3), + bonjourDisabled(4), + serviceDisabled(5), + noIPaddress(6), + l2InterfaceDown(7), + notPresent(8), + unknown(9) +} + + + + + +-- ------------------------------------------------------------- +-- --------- Table -------------------------------------- +-- ------------------------------------------------------------- + + +-- ------------------------------------------------------------ +-- --------- This MIb will not be bound in 750 version, ---------------- +-- --------- The MIb following rlBonjourStateTable will replace it------ +-- ------------------------------------------------------------ + rlBonjourStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlBonjourStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table listing the service bonjour status per service and IP interface. + In order to keep the table sorted according to the customary lexicographical + order of the rlBonjourStatusServiceName strings, rlBonjourStatusServiceName + will be padded with blanks. Bonjour will truncate the padded blanks when advertising this service name. + + Using this MIB user can monitor actual state of a service on an IP interface" + ::= {rlBonjour 2 } + + rlBonjourStatusEntry OBJECT-TYPE + SYNTAX RlBonjourStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlBonjourStatusEntry." + INDEX { rlBonjourStatusServiceName,rlBonjourStatusIPInterfaceType, rlBonjourStatusIPInterfaceAddr } + ::= {rlBonjourStatusTable 1 } + + RlBonjourStatusEntry ::= SEQUENCE { + rlBonjourStatusServiceName DisplayString , + rlBonjourStatusIPInterfaceType InetAddressType, + rlBonjourStatusIPInterfaceAddr InetAddress, + rlBonjourStatusState RlBonjourServiceState + } + + + + rlBonjourStatusServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable identifies the service name." + ::= { rlBonjourStatusEntry 1 } + + + rlBonjourStatusIPInterfaceType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable indicates the type of the IP interface + on which the Bonjour service should be published." + ::= { rlBonjourStatusEntry 2 } + + rlBonjourStatusIPInterfaceAddr OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable indicates the address of the IP interface + on which the Bonjour service should be published." + ::= { rlBonjourStatusEntry 3 } + + rlBonjourStatusState OBJECT-TYPE + SYNTAX RlBonjourServiceState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable identifies the service state on IP interface of the device." + ::= { rlBonjourStatusEntry 4 } + +-- ------------------------------------------------------------- +-- rlBonjourStateTable +-- ------------------------------------------------------------- + + rlBonjourStateTable OBJECT-TYPE + SYNTAX SEQUENCE OF RlBonjourStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table listing the service bonjour state per service and L2 interface. + The services that are displayed here are only those who are supported per project. + The L2 interfaces that are displayed here are either: + L2 interfaces with an IP on it + OR + L2 interfaces listed in the table below + Per each pair (service and L2 interface) table displays: + state : + UP - Bonjour published the service on this L2 interface + Not-exclude - the L2 interface has IP address (L2 interface is in UP state) + AND rlBonjourL2Table is empty + AND rlBonjourL2Mode is disable + include - the L2 interfaces are listed in the table rlBonjourL2Table + AND rlBonjourL2Mode is enabled + Down - Bonjour sent goodbye packets regarding this service on this L2 interface + exclude - the L2 interface is a member of the rlBonjourL2Table + AND rlBonjourL2Mode is disable + Not-Include - rlBonjourL2Table is empty + AND rlBonjourL2Mode is enable + service disabled - service was removed due to specific request from L1 manager + No IP address - the L2 interfaces is listed in the table rlBonjourL2EnableTable + BUT don't have an IP on it + Not-present - the L2 interfaces is listed in the table rlBonjourL2EnableTable + BUT not yet defined (like vlan not created or port in an unconnected member) + Bonjour disabled - rlBonjourPublish scalar is off + Using this MIB user can monitor actual state of a service on an L2 interface" + ::= {rlBonjour 3 } + + rlBonjourStateEntry OBJECT-TYPE + SYNTAX RlBonjourStateEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlBonjourStatusEntry." + INDEX { rlBonjourStateServiceName,rlBonjourStateL2Interface } + ::= {rlBonjourStateTable 1 } + + RlBonjourStateEntry ::= SEQUENCE { + rlBonjourStateServiceName DisplayString , + rlBonjourStateL2Interface InterfaceIndex, + rlBonjourStateOperationMode RlBonjourOperationState, + rlBonjourStateOperationReason RlBonjourOperationReason, + rlBonjourStateIPv6OperationMode RlBonjourOperationState, + rlBonjourStateIPv6OperationReason RlBonjourOperationReason + } + + + + rlBonjourStateServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable identifies the service name." + ::= { rlBonjourStateEntry 1 } + + + rlBonjourStateL2Interface OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable indicates the L2 interface + on which the Bonjour service should be published." + ::= { rlBonjourStateEntry 2 } + + rlBonjourStateOperationMode OBJECT-TYPE + SYNTAX RlBonjourOperationState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface)." + ::= { rlBonjourStateEntry 3 } + + rlBonjourStateOperationReason OBJECT-TYPE + SYNTAX RlBonjourOperationReason + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable specifies the reason for the value of rlBonjourStateOperationMode." + ::= { rlBonjourStateEntry 4 } + + rlBonjourStateIPv6OperationMode OBJECT-TYPE + SYNTAX RlBonjourOperationState + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates whether Bonjour over IPv4 is operational on the pair (service + L2 interface)." + ::= { rlBonjourStateEntry 5 } + + rlBonjourStateIPv6OperationReason OBJECT-TYPE + SYNTAX RlBonjourOperationReason + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable specifies the reason for the value of rlBonjourStateIPv6OperationMode" + ::= { rlBonjourStateEntry 6 } + +-- ------------------------------------------------------------- +-- rlBonjourL2Table +-- ------------------------------------------------------------- + + rlBonjourL2Table OBJECT-TYPE + SYNTAX SEQUENCE OF RlBonjourL2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table listing the L2 interfaces on which the user wishes to + enable OR disable Bonjour with respect to rlBonjourL2Mode. + If rlBonjourL2Mode is set to include AND L2 interface is in this table + it does not ensure Bonjour WILL publish services on it. + Publication is also dependent on these fundemental conditions: + rlBonjourPublish must be on + at least one service should be enabled + L2 must be present and UP + have at least one IP on it + If this table is empty AND rlBonjourL2Mode is set to include + Bonjour won't operate at all. + If rlBonjourL2Mode is set to exclude, and rlBonjourL2Table is empty + Bonjour will be published on ALL L2 interfaces answering to the + fundemental conditions specified above. + If rlBonjourL2Table is NOT empty then Bonjour will operate on + ALL L2 interfaces answering to the fundemental conditions specified + above BUT NOT members of this list. + " + ::= {rlBonjour 4 } + + rlBonjourL2Entry OBJECT-TYPE + SYNTAX RlBonjourL2Entry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " An entry in the rlBonjourL2Entry." + INDEX { rlBonjourL2Ifindex } + ::= {rlBonjourL2Table 1 } + + RlBonjourL2Entry ::= SEQUENCE { + rlBonjourL2Ifindex InterfaceIndex , + rlBonjourL2RowStatus RowStatus + } + + rlBonjourL2Ifindex OBJECT-TYPE + SYNTAX InterfaceIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This variable identifies the L2 interface." + ::= { rlBonjourL2Entry 1 } + + rlBonjourL2RowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable identifies the L2 interface status manager." + ::= { rlBonjourL2Entry 2 } + +-- ------------------------------------------------------------- +-- Scalars +-- ------------------------------------------------------------- + + rlBonjourL2Mode OBJECT-TYPE + SYNTAX INTEGER { + include (1), + exclude (2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "specify whether the L2 interfaces listed in rlBonjourL2Table + means include bonjour on these L2 interfaces once they: + rlBonjourPublish must be on + at least one service should be enabled + L2 must be present and UP + have at least one IP on it + OR exclude bonjour on these L2 interfaces even if they answer to + all the conditions above." + + + ::= {rlBonjour 5 } + + rlBonjourInstanceName OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Instance Name is given to Bonjour driver by the project part (L1Manager) + When a conflict occurs: found another station with the same instance name. + Bonjour driver is required to append _m to the given name + while m is an incremental integer, increasing on each conflict" + + ::= {rlBonjour 6 } + + rlBonjourHostName OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Host Name is given to Bonjour driver by the project part (L1Manager) + When a conflict occurs: found another station with the same host name. + Bonjour driver is required to append _m to the given name + while m is an incremental integer, increasing on each conflict" + + ::= {rlBonjour 7 } + +END -- cgit v1.2.3