From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB | 1372 ++++++++++++++++++++++++++++++++++++ 1 file changed, 1372 insertions(+) create mode 100644 MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB (limited to 'MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB') diff --git a/MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB b/MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB new file mode 100644 index 0000000..c24dfa9 --- /dev/null +++ b/MIBS/ciena/CIENA-WWP-LEOS-PORT-MIB @@ -0,0 +1,1372 @@ +-- This file was included in WWP MIB release 04-10-01-0027 + -- + -- WWP-LEOS-PORT-MIB.my + -- + -- + + WWP-LEOS-PORT-MIB DEFINITIONS ::= BEGIN + + IMPORTS + Integer32, Unsigned32, Counter32, Gauge32, TimeTicks, OBJECT-TYPE, NOTIFICATION-TYPE, MODULE-IDENTITY + FROM SNMPv2-SMI + DisplayString, MacAddress, TEXTUAL-CONVENTION, TruthValue, RowStatus + FROM SNMPv2-TC + sysName, sysLocation + FROM RFC1213-MIB + wwpModules, wwpModulesLeos + FROM WWP-SMI + dot3adAggPortActorAdminKey, dot3adAggPortListPorts + FROM IEEE8023-LAG-MIB; + + + wwpLeosPortMIB MODULE-IDENTITY + LAST-UPDATED "201205250000Z" + ORGANIZATION "Ciena, Inc" + CONTACT-INFO + "Mib Meister + 115 North Sullivan Road + Spokane Valley, WA 99037 + USA + Phone: +1 509 242 9000 + Email: support@ciena.com" + DESCRIPTION + "This MIB defines the managed objects for Ethernet ports." + + REVISION "201205250000Z" + DESCRIPTION + "Added wwpLeosEtherPortAdvertSpeed and wwpLeosEtherPortAdvertDuplex to WwpLeosEtherPortEntry MIB object" + REVISION "201102020000Z" + DESCRIPTION + "Added admitOnlyUntagged to wwpLeosEtherPortAcceptableFrameTypes MIB object" + REVISION "201011010000Z" + DESCRIPTION + "Added wwpLeosEtherPortEgressCosPolicy" + REVISION "201007280000Z" + DESCRIPTION + "Added wwpLeosEtherFixedRColor and wwpLeosEtherPortFrameCosMapId mib objects" + REVISION "201005051700Z" + DESCRIPTION + "Added changed length of wwpLeosPortDescr from 32 to 128." + REVISION "200811140000Z" + DESCRIPTION + "Added wwpLeosEtherPortEgressPortQueueMapId to wwpLeosEtherPortEntryTable. + Added 10 gig option to wwpLeosEtherInterfaceType, wwpLeosEtherAdminSpeed and wwpLeosEtherOperSpeed" + REVISION "200807210000Z" + DESCRIPTION + "Added wwpLeosEtherPortResolvedCosPolicy,wwpLeosEtherPortMode and wwpLeosEtherFixedRcos mib objects" + REVISION "200708110000Z" + DESCRIPTION + "Added new mib object wwpLeosEtherPortStateMirrorGroupType." + REVISION "200706200000Z" + DESCRIPTION + "Added new mib object wwpLeosEtherPortUntagDataVid." + REVISION "200605260000Z" + DESCRIPTION + "Added new mib object wwpLeosEtherPortOperAutoNeg." + REVISION "200605180000Z" + DESCRIPTION + "Added new mib object wwpLeosEtherPortStateMirrorGroupOperStatus. + Added new mib object wwpLeosEtherPortStateMirrorGroupNumSrcPorts. + Added new mib object wwpLeosEtherPortStateMirrorGroupNumDstPorts. + Added new mib object wwpLeosEtherPortStateMirrorGroupMemOperState." + REVISION "200603150000Z" + DESCRIPTION + "This MIB module is for the Extension of the dot1dBasePortTable for WWP Products" + REVISION "200507280000Z" + DESCRIPTION + "Added eumeration to wwpLeosEtherPortAdminSpeed." + REVISION "200404181700Z" + DESCRIPTION + "Added new tables to support port state mirroring feature." + ::= { wwpModulesLeos 2 } + + + -- + -- Textual conventions + -- + + PortList ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each octet within this value specifies a set of eight + ports, with the first octet specifying ports 1 through + 8, the second octet specifying ports 9 through 16, etc. + Within each octet, the most significant bit represents + the lowest numbered port, and the least significant bit + represents the highest numbered port. Thus, each port + of the bridge is represented by a single bit within the + value of this object. If that bit has a value of '1' + then that port is included in the set of ports; the port + is not included if its bit has a value of '0'." + SYNTAX OCTET STRING (SIZE (0..255)) + + PortEgressFrameCosPolicy ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Egress cos policy to use on this port + ignore means leave egress map disabled" + SYNTAX INTEGER { + ingore (1), + rcosToL2OuterPcpMap (2) + } + + PortIngressFixedColor ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Egress cos policy to use on this port + ignore means leave egress map disabled" + SYNTAX INTEGER { + green (1), + yellow (2) + } + + + -- + -- Node definitions + -- + + wwpLeosPortMIBObjects OBJECT IDENTIFIER ::= { wwpLeosPortMIB 1 } + + wwpLeosEtherPort OBJECT IDENTIFIER ::= { wwpLeosPortMIBObjects 1 } + + wwpLeosEtherPortNotif OBJECT IDENTIFIER ::= { wwpLeosPortMIBObjects 2 } + + -- Notifications + + wwpLeosPortMIBNotificationPrefix OBJECT IDENTIFIER ::= { wwpLeosPortMIB 2 } + wwpLeosPortMIBNotifications OBJECT IDENTIFIER ::= + { wwpLeosPortMIBNotificationPrefix 0 } + + -- Conformance information + + wwpLeosPortMIBConformance OBJECT IDENTIFIER ::= { wwpLeosPortMIB 3 } + wwpLeosPortMIBCompliances OBJECT IDENTIFIER ::= { wwpLeosPortMIBConformance 1 } + wwpLeosPortMIBGroups OBJECT IDENTIFIER ::= { wwpLeosPortMIBConformance 2 } + + + wwpLeosEtherPortTable OBJECT-TYPE + SYNTAX SEQUENCE OF WwpLeosEtherPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ethernet Ports." + ::= { wwpLeosEtherPort 1 } + + wwpLeosEtherPortEntry OBJECT-TYPE + SYNTAX WwpLeosEtherPortEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Port Entry in the Ethernet Port Table." + INDEX { wwpLeosEtherPortId } + ::= { wwpLeosEtherPortTable 1 } + + WwpLeosEtherPortEntry ::= SEQUENCE { + wwpLeosEtherPortId INTEGER, + wwpLeosEtherPortName DisplayString, + wwpLeosEtherPortDesc DisplayString, + wwpLeosEtherPortType INTEGER, + wwpLeosEtherPortPhysAddr MacAddress, + wwpLeosEtherPortAutoNeg TruthValue, + wwpLeosEtherPortAdminStatus INTEGER, + wwpLeosEtherPortOperStatus INTEGER, + wwpLeosEtherPortAdminSpeed INTEGER, + wwpLeosEtherPortOperSpeed INTEGER, + wwpLeosEtherPortAdminDuplex INTEGER, + wwpLeosEtherPortOperDuplex INTEGER, + wwpLeosEtherPortAdminFlowCtrl INTEGER, + wwpLeosEtherPortOperFlowCtrl INTEGER, + wwpLeosEtherIngressPvid INTEGER, + wwpLeosEtherUntagEgressVlanId INTEGER, + wwpLeosEtherPortAcceptableFrameTypes INTEGER, + wwpLeosEtherPortUntaggedPriority INTEGER, + wwpLeosEtherPortMaxFrameSize INTEGER, + wwpLeosEtherPortVlanIngressFiltering TruthValue, + wwpLeosEtherPortAdminAdvertisedFlowCtrl INTEGER, + wwpLeosEtherPortVplsPortType INTEGER, + wwpLeosEtherPortIngressCosPolicy INTEGER, + wwpLeosEtherPortIngressFixedDot1dPri INTEGER, + wwpLeosEtherPortUntagDataVsi INTEGER, + wwpLeosEtherPortOperationalSpeed Gauge32, + wwpLeosEtherPortUntagCtrlVsi INTEGER, + wwpLeosEtherPortMirrorPort TruthValue, + wwpLeosEtherPortMirrorEncap INTEGER, + wwpLeosEtherPortMirrorEncapVid INTEGER, + wwpLeosEtherPortMirrorEncapTpid INTEGER, + wwpLeosEtherPortMirrorIngress INTEGER, + wwpLeosEtherPortMirrorEgress INTEGER, + wwpLeosEtherPortUntagDataVsiType INTEGER, + wwpLeosEtherPortUntagCtrlVsiType INTEGER, + wwpLeosEtherPortVsIngressFiltering TruthValue, + wwpLeosEtherPortOperAutoNeg INTEGER, + wwpLeosEtherPortUpTime TimeTicks, + wwpLeosEtherPortUntagDataVid INTEGER, + wwpLeosEtherPortPhyLoopback TruthValue, + wwpLeosEtherPortVlanIngressFilterStrict TruthValue, + wwpLeosEtherPortMacSaDaSwap TruthValue, + wwpLeosEtherPortMacSaDaSwapVlan INTEGER, + wwpLeosEtherPortResolvedCosPolicy INTEGER, + wwpLeosEtherPortMode INTEGER, + wwpLeosEtherFixedRcos INTEGER, + wwpLeosEtherPortEgressPortQueueMapId INTEGER, + wwpLeosEtherPortResolvedCosMapId INTEGER, + wwpLeosEtherPortResolvedCosRemarkL2 TruthValue, + wwpLeosEtherPortL2TransformMode INTEGER, + wwpLeosEtherPortLinkFlapDetection TruthValue, + wwpLeosEtherPortLinkFlapCount INTEGER, + wwpLeosEtherPortLinkFlapDetectTime INTEGER, + wwpLeosEtherPortLinkFlapHoldTime INTEGER, + wwpLeosEtherFixedRColor PortIngressFixedColor, + wwpLeosEtherPortFrameCosMapId INTEGER, + wwpLeosEtherPortEgressCosPolicy PortEgressFrameCosPolicy, + wwpLeosEtherPortEgressSpeed Gauge32, + wwpLeosEtherPortAdaptiveRateSpeed Gauge32, + wwpLeosEtherPortIfgDecrease Integer32, + wwpLeosEtherPortAdvertSpeed INTEGER, + wwpLeosEtherPortAdvertDuplex INTEGER + } + + + wwpLeosEtherPortId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port ID for the instance. Port ID's start at 1, + and may not be consecutive for each additional port. + This port Id should refer to the dot1dBasePort in the + Dot1dBasePortEntry." + ::= { wwpLeosEtherPortEntry 1 } + + wwpLeosEtherPortName OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A textual string containing information about the + port. This string should indicate about the physical + location of the port as well." + ::= { wwpLeosEtherPortEntry 2 } + + wwpLeosEtherPortDesc OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "A textual string containing port description." + ::= { wwpLeosEtherPortEntry 3 } + + wwpLeosEtherPortType OBJECT-TYPE + SYNTAX INTEGER { + ethernet(1), + fastEthernet(2), + hundredFx(3), + gigEthernet(4), + lagPort(5), + unknown(6), + gigHundredFx(7), + tripleSpeed(8), + tenGigEthernet(9), + gigTenGigEthernet(10) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The port type for the port." + ::= { wwpLeosEtherPortEntry 4 } + + wwpLeosEtherPortPhysAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The ethernet MAC address for the port. This information can also + be achieved via dot1dTpFdbTable" + ::= { wwpLeosEtherPortEntry 5 } + + wwpLeosEtherPortAutoNeg OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object sets the port to AUTO NEG MOde and vice versa. + Specific platforms may have requirements of configuring + speed before moving the port to out of AUTO-NEG mode." + ::= { wwpLeosEtherPortEntry 6 } + + wwpLeosEtherPortAdminStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired state of the port." + ::= { wwpLeosEtherPortEntry 7 } + + wwpLeosEtherPortOperStatus OBJECT-TYPE + SYNTAX INTEGER { + up(1), + down(2), + notauth(3), + lbtx(4), + lbrx(5), + linkflap(6) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current operational state of Port." + ::= { wwpLeosEtherPortEntry 8 } + + wwpLeosEtherPortAdminSpeed OBJECT-TYPE + SYNTAX INTEGER { + tenMb(1), + hundredMb(2), + gig(3), + auto(4), + tenGig(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Desired speed of the port. + Set the port speed to be either 10MB, 100MB, or gig. Set the + port speed to auto to enable automatic port speed detection. + The default value for this object depends upon the platform." + ::= { wwpLeosEtherPortEntry 9 } + + wwpLeosEtherPortOperSpeed OBJECT-TYPE + SYNTAX INTEGER { + unknown(0), + tenMb(1), + hundredMb(2), + gig(3), + tenGig(4) + } + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current operational speed of the port." + ::= { wwpLeosEtherPortEntry 10 } + + wwpLeosEtherPortAdminDuplex OBJECT-TYPE + SYNTAX INTEGER { + half(1), + full(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The desired mode for the port. It can be set to either half or + full duplex operation. The default value for this object + depends upon the platform." + ::= { wwpLeosEtherPortEntry 11 } + + wwpLeosEtherPortOperDuplex OBJECT-TYPE + SYNTAX INTEGER { + half(1), + full(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current duplex mode of the port." + ::= { wwpLeosEtherPortEntry 12 } + + wwpLeosEtherPortAdminFlowCtrl OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + off(2), + asymTx(3), + asymRx(4), + sym(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the ports flow control operation." + ::= { wwpLeosEtherPortEntry 13 } + + wwpLeosEtherPortOperFlowCtrl OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + off(2), + asymTx(3), + asymRx(4), + sym(5) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Shows ports flow control configuration." + ::= { wwpLeosEtherPortEntry 14 } + + wwpLeosEtherIngressPvid OBJECT-TYPE + SYNTAX INTEGER (1..24576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Ingress PVID, the VLAN ID associated with untagged frames ingressing + the port or if tunnel is enabled on this port. The max value for this + object is platform dependent. Refer to architecture document for details + of platform dependency." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 15 } + + wwpLeosEtherUntagEgressVlanId OBJECT-TYPE + SYNTAX INTEGER (0..24576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "All the egress frames whose VLAN id matches the wwpLeosEtherUntagEgressVlanId, will + egress the port as untagged. To egress the frames tagged set + wwpLeosEtherUntagEgressVlanId to 0. The max value for this object is + platform dependent. Refer to architecture document for + details of platform dependency." + ::= { wwpLeosEtherPortEntry 16 } + + wwpLeosEtherPortAcceptableFrameTypes OBJECT-TYPE + SYNTAX INTEGER { + admitAll(1), + admitOnlyVlanTagged(2), + admitOnlyUntagged(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this is admitOnlyVlanTagged(2) the device will + discard untagged frames or Priority-Tagged frames + received on this port. When admitOnlyUntagged(3) is set, + the device will discard VLAN tagged frames received on + this port. With admitOnlyUntagged(3) and admitAll(1), + untagged frames or Priority-Tagged frames received on this + port will be accepted and assigned to the PVID for this port. + + This control does not affect VLAN independent BPDU + frames, such as GVRP and STP. It does affect VLAN + dependent BPDU frames, such as GMRP." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.3" + DEFVAL { admitAll } + ::= { wwpLeosEtherPortEntry 17 } + + wwpLeosEtherPortUntaggedPriority OBJECT-TYPE + SYNTAX INTEGER { + p0(0), + p1(1), + p2(2), + p3(3), + p4(4), + p5(5), + p6(6), + p7(7) + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "The 802.1p packet priority to be assigned to packets ingressing + this port that do not have an 802.1Q VLAN header. This priority + is also assigned to ingress frame if tunnel is enabled on this port." + ::= { wwpLeosEtherPortEntry 18 } + + wwpLeosEtherPortMaxFrameSize OBJECT-TYPE + SYNTAX INTEGER (1522..9216) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object will set the max frame size allowed on a + port. The max frame size can vary from 1522 bytes to 9216 bytes. + Default value is 1526 bytes." + ::= { wwpLeosEtherPortEntry 19 } + + + wwpLeosEtherPortVlanIngressFiltering OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this is true(1) the device will discard incoming + frames for VLANs which do not include this Port in its + Member set. When false(2), the port will accept all + incoming frames." + DEFVAL { true } + ::= { wwpLeosEtherPortEntry 20 } + + wwpLeosEtherPortAdminAdvertisedFlowCtrl OBJECT-TYPE + SYNTAX INTEGER { + unknown(1), + off(2), + asymTx(3), + sym(4), + symAsymRx(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the advertised flow control + for given port." + ::= { wwpLeosEtherPortEntry 21 } + + wwpLeosEtherPortVplsPortType OBJECT-TYPE + SYNTAX INTEGER { + notDefined(1), + subscriber(2), + networkFacing(3) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object specifies whether port is in subscriber type, + network facing side or both. " + ::= { wwpLeosEtherPortEntry 22 } + + wwpLeosEtherPortIngressCosPolicy OBJECT-TYPE + SYNTAX INTEGER { + leave(1), + fixed(2), + ippInherit(3), + phbgInherit(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the ingress cos policy to be applied to all + frames coming in on the given port." + ::= { wwpLeosEtherPortEntry 23 } + + wwpLeosEtherPortIngressFixedDot1dPri OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The 802.1p packet priority to be assigned to packets ingressing + this port that do not have an 802.1Q VLAN header. This priority + is also assigned to ingress untagged frame if the virtual switch + cos policy is set to 'fix' for a given port." + ::= { wwpLeosEtherPortEntry 24 } + + wwpLeosEtherPortUntagDataVsi OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the virtual switch to be used for this + port if data frame is untagged. If this object is set to 0 then + device will unset this object. + When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagDataVsiType must also + be set to mpls (Use multiple set operation)" + ::= { wwpLeosEtherPortEntry 25 } + + wwpLeosEtherPortOperationalSpeed OBJECT-TYPE + SYNTAX Gauge32 + UNITS "kbps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An estimate of the port's current bandwidth in k-bits per second + for given port." + ::= { wwpLeosEtherPortEntry 26 } + + wwpLeosEtherPortUntagCtrlVsi OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the virtual switch to be used for this + port if control frame is untagged. If this object is set to 0 then + device will unset this object. + When setting this object to Mpls Vsi Index then wwpLeosEtherPortUntagCtrlVsiType must also + be set to mpls (Use multiple set operation)" + ::= { wwpLeosEtherPortEntry 27 } + + wwpLeosEtherPortMirrorPort OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether the port will allow traffic from other ports to + be mirrored to this port. + To allow traffic from other ports to be sent to this port, set this object to + True(1). This port is known as a mirror port. + If set to true, then other ports may set the values of their + wwpLeosEtherPortMirrorIngress or wwpLeosEtherPortMirrorEgress + objects to the port index of this port. + Setting this object to false(2) disables this port as a mirror port." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 28 } + + wwpLeosEtherPortMirrorIngress OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object is the port index of a mirror port. The ingress traffic + of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort + object to true. + If the value of this object is set to zero this port's ingress traffic will not be mirrored." + DEFVAL {0} + ::= { wwpLeosEtherPortEntry 29 } + + wwpLeosEtherPortMirrorEgress OBJECT-TYPE + SYNTAX INTEGER (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The value of this object is the port index of a mirror port. The egress traffic + of this port can be mirrored by setting the destination port's wwpLeosEtherPortMirrorPort + object to true. + If the value of this object is set to zero this port's egress traffic will not be mirrored." + DEFVAL {0} + ::= { wwpLeosEtherPortEntry 30 } + + wwpLeosEtherPortUntagDataVsiType OBJECT-TYPE + SYNTAX INTEGER { + ethernet(1), + mpls(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the virtual switch instance type associated with this + port. This object defaults to ethernet and specifies if + wwpLeosEtherPortUntagDataVsi belongs to ethernet virtual switch table + (wwpLeosVplsVirtualSwitchEthTable in WWP-LEOS-VPLS-MIB) + or mpls virtual switch table (wwpLeosVplsVirtualSwitchMplsTable in + WWP-LEOS-VPLS-MIB). + When setting wwpLeosEtherPortUntagDataVsi to MPLS Vsi Index then this object must also be set to + mpls (Use mutliple set operation)." + DEFVAL {ethernet} + ::= { wwpLeosEtherPortEntry 31 } + + wwpLeosEtherPortUntagCtrlVsiType OBJECT-TYPE + SYNTAX INTEGER { + ethernet(1), + mpls(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object specifies the virtual switch instance type associated with this + port. This object defaults to ethernet and specifies if + wwpLeosEtherPortUntagCtrlVsi belongs to ethernet virtual switch table + (wwpLeosVplsVirtualSwitchEthTable) or mpls virtual switch table + (wwpLeosVplsVirtualSwitchMplsTable). + When setting wwpLeosEtherPortUntagCtrlVsi to MPLS Vsi Index then this object must also be set to + mpls (Use mutliple set operation)" + DEFVAL {ethernet} + ::= { wwpLeosEtherPortEntry 32 } + + wwpLeosEtherPortVsIngressFiltering OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This item is applicable to this port when the port is + added as a per-port member to a virtual switch. If true(1) the device + will discard incoming tagged frames. If false(2) the device will + forwared incoming tagged frames so long as those customer tagged + frames do not match another virtual switch with this port included as + a per-port-per-vlan member." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 33 } + + wwpLeosEtherPortOperAutoNeg OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object specifies the operational auto neg state." + ::= { wwpLeosEtherPortEntry 34 } + + wwpLeosEtherPortUpTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The object specifies the port up time in hundredths of a second." + ::= { wwpLeosEtherPortEntry 35 } + + wwpLeosEtherPortUntagDataVid OBJECT-TYPE + SYNTAX INTEGER (0..24576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Ingress Untagged Data Vid, the VLAN ID stamped on untagged frames + ingressing the port or if tunnel is enabled on this port. To disable + tagging of untagged data on ingress write a value of 0. The max value + for this object is platform dependent. Refer to architecture document + for details of platform dependency." + REFERENCE + "IEEE 802.1Q/D11 Section 12.10.1.1" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 36 } + + wwpLeosEtherPortPhyLoopback OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether the phy has been placed in loopback mode, + which causes frames egressing the port to be looped back to the port." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 37 } + + wwpLeosEtherPortVlanIngressFilterStrict OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This item is applicable to this port when the port is + added as a to a virtual switch. If true(1) the legacy ingress filter behavior + will be enforced at member addition (drop bit will be set to drop untagged + traffic). If false, the splat bit will not be changed. Note that external + VLAN associations are also maintained when strict is false." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 38 } + + wwpLeosEtherPortMacSaDaSwap OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether the MAC SA and DA will be swapped on + frames egressing the port. This only works on a 311V." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 39 } + + wwpLeosEtherPortMacSaDaSwapVlan OBJECT-TYPE + SYNTAX INTEGER (0..24576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether the MAC SA and DA will be swapped on + specific VLAN frames egressing the port. This only works on a 311V." + DEFVAL { 0 } + ::= { wwpLeosEtherPortEntry 40 } + + wwpLeosEtherPortResolvedCosPolicy OBJECT-TYPE + SYNTAX INTEGER { + dot1d(1), + l3DscpCos(2), + fixedCos(3), + unknown(99) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " The Resolved Cost Policy. + Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 41 } + + wwpLeosEtherPortMode OBJECT-TYPE + SYNTAX INTEGER { + rj45(1), + sfp(2), + default(3), + unknown(99) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The mode of the port + Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 42 } + + wwpLeosEtherFixedRcos OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The fixed Resolve Cost value. + Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 43 } + + wwpLeosEtherPortEgressPortQueueMapId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Egress-port-Queue associated with this port. + Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 44 } + + wwpLeosEtherPortResolvedCosMapId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "RCOS map id for the port. + Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 45 } + + wwpLeosEtherPortResolvedCosRemarkL2 OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The object specifies whether to remark L2 based on L3. This applies when the + resolved cos policy is either l3-dscp-cos or dot1d-tag1-cos but not when it is + fixed-cos policy. Setting this attribute is not supported in leos version 4" + ::= { wwpLeosEtherPortEntry 46 } + + wwpLeosEtherPortL2TransformMode OBJECT-TYPE + SYNTAX INTEGER { + none(0), + iPush-e-Pop(1), + iStamp-Push-e-QualifiedPopStamp(2), + iPush-e-PopStamp(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "L2 transform action for port. + Setting this attribute is not supported in leos version 4" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 47 } + + wwpLeosEtherPortLinkFlapDetection OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether link flap detection will be + enabled on the port." + DEFVAL { false } + ::= { wwpLeosEtherPortEntry 48 } + + wwpLeosEtherPortLinkFlapCount OBJECT-TYPE + SYNTAX INTEGER (1..64) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines how many link down events are required + to trigger a link flap event." + DEFVAL { 5 } + ::= { wwpLeosEtherPortEntry 49 } + + wwpLeosEtherPortLinkFlapDetectTime OBJECT-TYPE + SYNTAX INTEGER (1..600) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the time in seconds during which link + down events are accumlated to trigger a link flap event." + DEFVAL { 10 } + ::= { wwpLeosEtherPortEntry 50 } + + wwpLeosEtherPortLinkFlapHoldTime OBJECT-TYPE + SYNTAX INTEGER (0..600) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the time in seconds that a port will + be operationally disabled after a link flap event, before + it is re-enabled. A value of zero causes the port to + remain disabled until manually enabled." + DEFVAL { 300 } + ::= { wwpLeosEtherPortEntry 51 } + + wwpLeosEtherFixedRColor OBJECT-TYPE + SYNTAX PortIngressFixedColor + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This sets the fixed color to green (default) or yellow. + Setting this attribute is not supported in saos version 4" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 52 } + + wwpLeosEtherPortFrameCosMapId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Frame COS map id for the port. + Setting this attribute is not supported in leos version 4" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 53 } + + + wwpLeosEtherPortEgressCosPolicy OBJECT-TYPE + SYNTAX PortEgressFrameCosPolicy + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the egress frame cos policy + Setting this attribute is not supported in leos version 4" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 54 } + + wwpLeosEtherPortEgressSpeed OBJECT-TYPE + SYNTAX Gauge32 + UNITS "kbps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An estimate of the port's current egress bandwidth restriction + in k-bits per second for given port. A value of 0 means there + is no active restriction. This attribute not supported in leos + version 6" + ::= { wwpLeosEtherPortEntry 55 } + + wwpLeosEtherPortAdaptiveRateSpeed OBJECT-TYPE + SYNTAX Gauge32 + UNITS "kbps" + MAX-ACCESS read-only + STATUS current + DESCRIPTION "An estimate of the port's current adaptive-rate bandwidth restriction + in k-bits per second for given port. A value of 0 means there is no + active restriction. This attribute not supported in leos version 6" + ::= { wwpLeosEtherPortEntry 56 } + + wwpLeosEtherPortMirrorEncap OBJECT-TYPE + SYNTAX INTEGER { + none(0), + vlanTag(1) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines whether the port will encapsulate mirrored + frames by adding a vlan-tag. (Or, in the case where a mirrored + frame is already tagged, by adding a further vlan-tag to the frame) + To allow mirrored traffic to be encapsulated, set this object to + vlan-tag(1). + If set to vlan-tag, then the values of + wwpLeosEtherPortMirrorEncapVid and wwpLeosEtherPortMirrorEncapTpid + will be used to populate tag added to each mirrored frame. + Setting this object to none(0) indicates no tag is to be added + to the mirrored frames." + DEFVAL { none } + ::= { wwpLeosEtherPortEntry 57 } + + wwpLeosEtherPortMirrorEncapVid OBJECT-TYPE + SYNTAX INTEGER (0..24576) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the VID that will be added to mirrored frames + when the mirroring encapsulation mode is vlan-tag" + DEFVAL { 1 } + ::= { wwpLeosEtherPortEntry 58 } + + wwpLeosEtherPortMirrorEncapTpid OBJECT-TYPE + SYNTAX INTEGER { + tpid8100(1), + tpid9100(2), + tpid88A8(3) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the tpid used in the tag that is added to + mirrored frames, when the mirroring encapsulation mode is vlan-tag" + DEFVAL { tpid8100 } + ::= { wwpLeosEtherPortEntry 59 } + + wwpLeosEtherPortIfgDecrease OBJECT-TYPE + SYNTAX Integer32(0..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the number of bytes that will be subtracted + from the minimum standard IFG of 12 bytes as defined in IEEE 802.3. + SAOS 6.x only supports a value of 0 or 4." + DEFVAL { 0 } + ::= { wwpLeosEtherPortEntry 60 } + + wwpLeosEtherPortAdvertSpeed OBJECT-TYPE + SYNTAX INTEGER { + not-applicable(1), + ten(2), + hundred(3), + gigabit(4), + ten-hundred-gigabit(5) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the speed capabilities that will be advertised during the auto-negotiation process." + DEFVAL { ten-hundred-gigabit } + ::= { wwpLeosEtherPortEntry 61 } + + wwpLeosEtherPortAdvertDuplex OBJECT-TYPE + SYNTAX INTEGER { + not-applicable(1), + half(2), + full(3), + half-full(4) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This object defines the duplex capabilities that will be advertised during the auto-negotiation process." + DEFVAL { half-full } + ::= { wwpLeosEtherPortEntry 62 } + + + -- + -- Port Flush Table + -- + wwpLeosEtherPortFlushTable OBJECT-TYPE + SYNTAX SEQUENCE OF WwpLeosEtherPortFlushEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of port flush entries." + ::= { wwpLeosEtherPort 2 } + + wwpLeosEtherPortFlushEntry OBJECT-TYPE + SYNTAX WwpLeosEtherPortFlushEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Broadcast containment port entry in the Ethernet Port Table." + INDEX { wwpLeosEtherPortId } + ::= { wwpLeosEtherPortFlushTable 1 } + + WwpLeosEtherPortFlushEntry ::= SEQUENCE { + wwpLeosEtherPortFlushActivate TruthValue + } + + wwpLeosEtherPortFlushActivate OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to 'true' will cause + the Macs to be flushed for the port + specified by wwpLeosEtherPortId." + DEFVAL { false } + ::= { wwpLeosEtherPortFlushEntry 1 } + + -- + -- Port Traps enable/disable + -- + wwpLeosEtherPortTrapsTable OBJECT-TYPE + SYNTAX SEQUENCE OF WwpLeosEtherPortTrapsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table of Ethernet Ports Traps." + ::= { wwpLeosEtherPort 3 } + + wwpLeosEtherPortTrapsEntry OBJECT-TYPE + SYNTAX WwpLeosEtherPortTrapsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Port Traps Entry in the Ethernet Port Trap Table." + INDEX { wwpLeosEtherPortId } + ::= { wwpLeosEtherPortTrapsTable 1 } + + WwpLeosEtherPortTrapsEntry ::= SEQUENCE { + wwpLeosEtherPortTrapsState INTEGER + } + + wwpLeosEtherPortTrapsState OBJECT-TYPE + SYNTAX INTEGER { + disable(1), + enable(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object will enable or disable all traps on given port." + ::= { wwpLeosEtherPortTrapsEntry 1 } + + -- + -- Port State Mirror Group Table + -- + wwpLeosEtherPortStateMirrorGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF WwpLeosEtherPortStateMirrorGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table can be used to keep track of all the port state mirror + groups. + + To create entry in this table along with indexes following mib + objects must be set using multiple set operation + wwpLeosEtherPortStateMirrorGroupName must be valid string. + wwpLeosEtherPortStateMirrorGroupStatus must be set." + ::= { wwpLeosEtherPort 4 } + + wwpLeosEtherPortStateMirrorGroupEntry OBJECT-TYPE + SYNTAX WwpLeosEtherPortStateMirrorGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table will define the port state mirror group." + INDEX { wwpLeosEtherPortStateMirrorGroupId } + ::= { wwpLeosEtherPortStateMirrorGroupTable 1 } + + WwpLeosEtherPortStateMirrorGroupEntry ::= SEQUENCE { + wwpLeosEtherPortStateMirrorGroupId INTEGER, + wwpLeosEtherPortStateMirrorGroupName DisplayString, + wwpLeosEtherPortStateMirrorGroupOperStatus INTEGER, + wwpLeosEtherPortStateMirrorGroupNumSrcPorts Counter32, + wwpLeosEtherPortStateMirrorGroupNumDstPorts Counter32, + wwpLeosEtherPortStateMirrorGroupOperStatus INTEGER, + wwpLeosEtherPortStateMirrorGroupStatus RowStatus, + wwpLeosEtherPortStateMirrorGroupType INTEGER + } + + wwpLeosEtherPortStateMirrorGroupId OBJECT-TYPE + SYNTAX INTEGER (1..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This mib object is used as index in the table and is used + to identify the unique group id." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 1 } + + wwpLeosEtherPortStateMirrorGroupName OBJECT-TYPE + SYNTAX DisplayString (SIZE(1..15)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This mib object is used to specify the name of the group." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 2 } + + wwpLeosEtherPortStateMirrorGroupOperStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This mib object is used to specify the operational status of the group." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 3 } + + wwpLeosEtherPortStateMirrorGroupNumSrcPorts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This mib object is used to specify the total number of source ports + that exists in the group." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 4 } + + wwpLeosEtherPortStateMirrorGroupNumDstPorts OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This mib object is used to specify the total number of destination ports + that exists in the group." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 5 } + + wwpLeosEtherPortStateMirrorGroupStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to manage the creation and deletion of the + conceptual rows in this table." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 6 } + + wwpLeosEtherPortStateMirrorGroupType OBJECT-TYPE + SYNTAX INTEGER { + unidirectional(1), + bidirectional(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This mib object is used to specify the directional mode type for the + port state mirror group. A uni-directional(1) mirror group type will only + mirror the port state of the source port(s) to the destination port(s). + The bi-directional(2) mirror group type will mirror state of either the + source port(s) to the destination port(s) or the state of the destination + port(s) will be mirrored to the source port(s). Where there are more than + one source or destination ports the combined state of the source or destination + group will be the combined 'OR'ed status of all the ports in either the source + or destination groups. In other words, if one or more source ports is 'UP' + then the source group is 'UP' and the mirrored destination state may be 'UP'. + The default for this object type is uni-directional." + ::= { wwpLeosEtherPortStateMirrorGroupEntry 7 } + + + -- + -- Port State Mirror Group Membership Table + -- + wwpLeosEtherPortStateMirrorGroupMemTable OBJECT-TYPE + SYNTAX SEQUENCE OF WwpLeosEtherPortStateMirrorGroupMemEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table is used to keep track of port group membership." + ::= { wwpLeosEtherPort 5 } + + wwpLeosEtherPortStateMirrorGroupMemEntry OBJECT-TYPE + SYNTAX WwpLeosEtherPortStateMirrorGroupMemEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Each entry in this table is used to represent the membership of port + to a given group and group type." + INDEX { wwpLeosEtherPortStateMirrorGroupId, wwpLeosEtherPortId } + ::= { wwpLeosEtherPortStateMirrorGroupMemTable 1 } + + WwpLeosEtherPortStateMirrorGroupMemEntry ::= SEQUENCE { + wwpLeosEtherPortStateMirrorGroupMemType INTEGER, + wwpLeosEtherPortStateMirrorGroupMemOperState INTEGER, + wwpLeosEtherPortStateMirrorGroupMemStatus RowStatus + } + + wwpLeosEtherPortStateMirrorGroupMemType OBJECT-TYPE + SYNTAX INTEGER { + srcPort(1), + dstPort(2) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Setting this object will specify the type of group this port is member of for a given port state mirror + group. This object can only be set while creating the entry. This object cannot be modified once entry + is created." + DEFVAL { srcPort } + ::= { wwpLeosEtherPortStateMirrorGroupMemEntry 1 } + + wwpLeosEtherPortStateMirrorGroupMemOperState OBJECT-TYPE + SYNTAX INTEGER { + disabled(1), + enabled(2) + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This mib object is used to specify the operational status of the port." + ::= { wwpLeosEtherPortStateMirrorGroupMemEntry 2 } + + wwpLeosEtherPortStateMirrorGroupMemStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Used to manage the creation and deletion of the + conceptual rows in this table." + ::= { wwpLeosEtherPortStateMirrorGroupMemEntry 3 } + + -- + -- Traps Defination + -- + wwpLeosEtherStndLinkUpDownTrapsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to 'false(2)' will cause + standard Link Up Down Traps to be suppressed." + DEFVAL { true } + ::= { wwpLeosEtherPortNotif 1 } + + wwpLeosEtherPortLinkUpDownTrapsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this object to 'true(1)' will cause + wwp specific port up down trap to be generated." + DEFVAL { false } + ::= { wwpLeosEtherPortNotif 2 } + + wwpLeosEtherAggPortLinkUpDownTrapsEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION "Setting this object to 'true(1)' will cause wwp + specific agg port up down trap to be generated + for a link state change on a physical port that + is a member of a agg." + DEFVAL { false } + ::= { wwpLeosEtherPortNotif 3 } + + wwpLeosEthLinkUp NOTIFICATION-TYPE + OBJECTS { sysName, + sysLocation, + wwpLeosEtherPortId, + wwpLeosEtherPortName, + wwpLeosEtherPortType, + wwpLeosEtherPortAdminStatus, + wwpLeosEtherPortOperStatus, + wwpLeosEtherPortDesc + } + STATUS current + DESCRIPTION + "A wwpLeosEthLinkUp trap signifies that the SNMP entity, acting in + an agent role, has detected that the ifOperStatus object for + one of its communication links has entered the up state." + ::= { wwpLeosPortMIBNotifications 3 } + + wwpLeosEthLinkDown NOTIFICATION-TYPE + OBJECTS { sysName, + sysLocation, + wwpLeosEtherPortId, + wwpLeosEtherPortType, + wwpLeosEtherPortName, + wwpLeosEtherPortAdminStatus, + wwpLeosEtherPortOperStatus, + wwpLeosEtherPortDesc + } + STATUS current + DESCRIPTION + "A wwpLeosEthLinkDown trap signifies that the SNMP entity, acting in + an agent role, has detected that the ifOperStatus object for + one of its communication links has entered the down state." + ::= { wwpLeosPortMIBNotifications 4 } + + wwpLeosEthAdminSpeedIncompatible NOTIFICATION-TYPE + OBJECTS { wwpLeosEtherPortId + } + STATUS current + DESCRIPTION + "A wwpLeosEthAdminSpeedIncompatible trap is generated when the port + administrative speed doesn't match the speed of the SFP transceiver + installed." + ::= { wwpLeosPortMIBNotifications 5 } + + wwpLeosEthLinkFlap NOTIFICATION-TYPE + OBJECTS { sysName, + sysLocation, + wwpLeosEtherPortId, + wwpLeosEtherPortType, + wwpLeosEtherPortName, + wwpLeosEtherPortOperStatus, + wwpLeosEtherPortDesc, + wwpLeosEtherPortLinkFlapHoldTime + } + STATUS current + DESCRIPTION + "A wwpLeosEthLinkFlap trap signifies that the SNMP entity, + acting in an agent role, has detected that the ifOperStatus + object for one of its communication links has been changed + due to link flap detection." + ::= { wwpLeosPortMIBNotifications 6 } + + wwpLeosAggLinkUpDown NOTIFICATION-TYPE + OBJECTS { sysName, + sysLocation, + wwpLeosEtherPortId, + wwpLeosEtherPortName, + wwpLeosEtherPortDesc, + wwpLeosEtherPortType, + wwpLeosEtherPortAdminStatus, + wwpLeosEtherPortOperStatus, + dot3adAggPortActorAdminKey, + dot3adAggPortListPorts, + wwpLeosEtherPortName, + wwpLeosEtherPortDesc + } + STATUS current + DESCRIPTION + "A wwpLeosAggLinkUpDown trap signifies that the SNMP entity, + acting in an agent role, has detected that the ifOperStatus + object for one of its communication links has changed state." + ::= { wwpLeosPortMIBNotifications 7 } + + END + \ No newline at end of file -- cgit v1.2.3