From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/cambium/WHISP-SM-MIB | 4156 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 4156 insertions(+) create mode 100644 MIBS/cambium/WHISP-SM-MIB (limited to 'MIBS/cambium/WHISP-SM-MIB') diff --git a/MIBS/cambium/WHISP-SM-MIB b/MIBS/cambium/WHISP-SM-MIB new file mode 100644 index 0000000..56d2856 --- /dev/null +++ b/MIBS/cambium/WHISP-SM-MIB @@ -0,0 +1,4156 @@ + +-- +-- whisp-sm-mib.mib +-- GENERATED FROM ui_db.xml +-- +-- ***************************************************************************************** +-- Copyright 2005 - 2015 (c), Cambium Networks +-- Cambium Networks Confidential Proprietary +-- ***************************************************************************************** +-- +-- Canopy SM and Backhaul Timing Slave MIB definitions. +-- +-- ***************************************************************************************** + +WHISP-SM-MIB DEFINITIONS ::= BEGIN +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, Counter32, Counter64, Gauge32, TimeTicks, IpAddress, Unsigned32 + FROM SNMPv2-SMI + DisplayString, PhysAddress, MacAddress + FROM SNMPv2-TC + OBJECT-GROUP + FROM SNMPv2-CONF + WhispLUID, WhispMACAddress + FROM WHISP-TCV2-MIB + whispModules, whispBox, whispAps, whispSm + FROM WHISP-GLOBAL-REG-MIB + dhcpRfPublicIp, whispBoxEsn + FROM WHISP-BOX-MIBV2-MIB + ; + +whispSmMibModule MODULE-IDENTITY + LAST-UPDATED "200304150000Z" + ORGANIZATION "Cambium Networks" + CONTACT-INFO + "Cambium Networks Support + email: support@cambiumnetworks.com" + DESCRIPTION + "This module contains MIB definitions for Subscriber Modem." + ::= {whispModules 13} + +-- ------------------------------------------------------------------------- +-- Top Level Registrations + +whispSmConfig OBJECT IDENTIFIER ::= {whispSm 1} +whispSmSecurity OBJECT IDENTIFIER ::= {whispSm 7} +whispSmStatus OBJECT IDENTIFIER ::= {whispSm 2} +whispSmGroups OBJECT IDENTIFIER ::= {whispSm 3} +whispSmEvent OBJECT IDENTIFIER ::= {whispSm 4} +whispSmDfsEvent OBJECT IDENTIFIER ::= {whispSmEvent 1} +whispSmSpAnEvent OBJECT IDENTIFIER ::= {whispSmEvent 2} +whispSmDHCPClientEvent OBJECT IDENTIFIER ::= {whispSmEvent 3} +whispSmControls OBJECT IDENTIFIER ::= {whispSm 8} + +-- ------------------------------------------------------------------------- + + +-- Subscriber Modem and Backhaul timing slave configuration + + rfScanList OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "RF scan list string. + The frequencies vary by product and region. + If the frequency list is too long an SNMP error will be returned. If this occurs please refer to + OID rfScanListTable, which will allow user to enter the full range of available frequencies. + String length is limited to SNMP buffer size, so while all frequencies may be set, not all may be retrieved. + Special settings: + 0: none. + all: All frequencies in the band(s) supported by the radio will be selected. + all49, all51, all52: Available only for 450i 5 GHz wideband radio. + all54, all57: Available only for 450 and 450i 5 GHz radios. + When doing a set, separate values with comma with no white space between values." + ::={whispSmConfig 1} + + powerUpMode OBJECT-TYPE + SYNTAX INTEGER { + operational(0), + aim(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SM Power Up Mode With No 802.3 Link. + 0 - Power up in Operational mode. + 1 - Power up in Aim mode." + ::={whispSmConfig 2} + + lanIpSm OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "LAN IP." + ::={whispSmConfig 3} + + lanMaskSm OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "LAN subnet mask." + ::={whispSmConfig 4} + + defaultGwSm OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Default gateway." + ::={whispSmConfig 5} + + networkAccess OBJECT-TYPE + SYNTAX INTEGER { + localIP(0), + publicIP(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Network accessibility. Public or local IP. + For multipoint only." + ::={whispSmConfig 6} + + authKeySm OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Authentication key. It should be equal or less than 32 + characters long." + ::={whispSmConfig 7} + + enable8023link OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "To enable or disable 802.3 link. For SMs only. Deprecated: Use enable8023linkBox instead." + ::={whispSmConfig 8} + + authKeyOption OBJECT-TYPE + SYNTAX INTEGER { + useDefault(0), + useKeySet(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This option is for SMs only. Backhaul timing slave always + uses the set key. + 0 - Use default key. + 1 - Use set key." + ::={whispSmConfig 9} + + timingPulseGated OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0 - Disable (Always propagate the frame timing pulse). + 1 - Enable (If SM out of sync then dont propagate the frame timing pulse)." + ::={whispSmConfig 10} + +-- NAPT configuration + + naptPrivateIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "NAPT private IP address. Only the first three bytes can be + changed when NAPT is enabled." + ::={whispSmConfig 11} + + naptPrivateSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "NAPT private subnet mask. Only the last byte can be + changed when NAPT is enabled. The address will always be: + 255.255.255.x." + ::={whispSmConfig 12} + + naptPublicIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address of NAPT Public Interface. The variable is available + only when NAPT is enabled." + ::={whispSmConfig 13} + + naptPublicSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask for NAPT Public Interface. The variable is available + only when NAPT is enabled." + ::={whispSmConfig 14} + + naptPublicGatewayIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address of NAPT Public Interface Gateway. The variable is available + only when NAPT is enabled." + ::={whispSmConfig 15} + + naptRFPublicIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address of RF Public Interface. The variable is available + only when NAPT is enabled." + ::={whispSmConfig 16} + + naptRFPublicSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Subnet mask of RF Public Interface. The variable is available + only when NAPT is enabled." + ::={whispSmConfig 17} + + naptRFPublicGateway OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP Address of RF Public Interface Gateway. The variable is + available only when NAPT is enabled." + ::={whispSmConfig 18} + + naptEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable NAPT. For multipoint only. + 1=Enable NAPT, 0=Disable NAPT." + ::={whispSmConfig 19} + + arpCacheTimeout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ARP cache time out in unit of minutes. For multipoint only. + Range from 1-30." + ::={whispSmConfig 20} + + tcpGarbageCollectTmout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Units of minutes for TCP garbage collection. For multipoint only. + Range 4-1440." + ::={whispSmConfig 21} + + udpGarbageCollectTmout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Units of minutes for UDP garbage collection. For multipoint only. + Range 1-1440." + ::={whispSmConfig 22} + +-- DHCP configuration + + dhcpClientEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To enable or disable DHCP client. For multipoint SM's + with NAPT enabled." + ::={whispSmConfig 23} + + dhcpServerEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable DHCP server. For multipoint SM's + with NAPT enabled." + ::={whispSmConfig 24} + + dhcpServerLeaseTime OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Units of days for DHCP server lease time. For multipoint + SM's with NAPT enabled. Range from 1-30." + ::={whispSmConfig 25} + + dhcpIPStart OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The last byte will be set for the starting IP that + our DHCP server gives away. The first 3 bytes of the + starting IP are the same as those of NAPT private IP" + ::={whispSmConfig 26} + + dnsAutomatic OBJECT-TYPE + SYNTAX INTEGER { + manually(0), + automatically(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To have DHCP Server obtain DNS information automatically or manually." + ::={whispSmConfig 27} + + prefferedDNSIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The preferred DNS IP when we are configured for static DNS + (Not used when configured for automatic DNS)." + ::={whispSmConfig 28} + + alternateDNSIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The alternate DNS IP when we are configured for static DNS + (Not used when configured for automatic DNS)." + ::={whispSmConfig 29} + + dmzIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Only the last byte of DMZ Host IP will be set. + The first 3 bytes of DMZ IP are the same as those of + NAPT private IP." + ::={whispSmConfig 30} + + dmzEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable DMZ host functionality." + ::={whispSmConfig 31} + + dhcpNumIPsToLease OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Number of IP addresses that our DHCP server can give away." + ::={whispSmConfig 32} + + pppoeFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set PPPoE packet filter when NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 33} + + smbFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set SMB packet filter when NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 34} + + snmpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set SNMP packet filter when NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 35} + + userP1Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 1 packet filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 36} + + userP2Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 2 packet filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 37} + + userP3Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 3 packet filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 38} + + allOtherIpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set all other IPv4 packet filter when NAT + is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 39} + + upLinkBCastFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This variable is currently obsolete." + ::={whispSmConfig 40} + + arpFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set ARP packet filter when NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 41} + + allOthersFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set all other packet filter when NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 42} + +-- User Defined Port Filtering Configuration + + userDefinedPort1 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "An integer value of number one user defined port. Range:0-65535 + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 43} + + port1TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 1 TCP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 44} + + port1UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 1 UDP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 45} + + userDefinedPort2 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "An integer value of number two user defined port. Range:0-65535 + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 46} + + port2TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 2 TCP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 47} + + port2UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 2 UDP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 48} + + userDefinedPort3 OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "An integer value of number three user defined port. Range:0-65535 + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 49} + + port3TCPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 3 TCP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 50} + + port3UDPFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set user defined port 3 UDP traffic filter. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 51} + + bootpcFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set bootp client sourced packets filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 52} + + bootpsFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set bootp server sourced packets filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 53} + + ip4MultFilter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set IPv4 MultiCast packets filter when + NAT is disabled. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 54} + + ingressVID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Untagged ingress VID." + ::={whispSmConfig 55} + +-- CIR configuration + + lowPriorityUplinkCIR OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Low priority uplink CIR." + ::={whispSmConfig 56} + + lowPriorityDownlinkCIR OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Low priority downlink CIR." + ::={whispSmConfig 57} + + hiPriorityChannel OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable high priority channel." + ::={whispSmConfig 58} + + hiPriorityUplinkCIR OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "High priority uplink CIR." + ::={whispSmConfig 59} + + hiPriorityDownlinkCIR OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "High priority downlink CIR." + ::={whispSmConfig 60} + + smRateAdapt OBJECT-TYPE + SYNTAX INTEGER { + onex(0), + onextwox(1), + onextwoxthreex(2)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Rate adaptation parameter. 0: no rate adaptation. 1: 1x and 2x adaptation. 2: 1x,2x and 3x adaptation." + ::={whispSmConfig 61} + + upLnkDataRate OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sustained uplink bandwidth cap." + ::={whispSmConfig 62} + + upLnkLimit OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Burst uplink bandwidth cap." + ::={whispSmConfig 63} + + dwnLnkDataRate OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sustained downlink bandwidth cap." + ::={whispSmConfig 64} + + dwnLnkLimit OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Burst downlink bandwidth cap." + ::={whispSmConfig 65} + + dfsConfig OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To configure proper regions for Dynamic Frequency Shifting. For 5.2/5.4/5.7 GHz radios." + ::={whispSmConfig 66} + + ethAccessFilterEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To enable or disable Ethernet Port access filtering to SM Management Functions. + (0) - Ethernet access to SM Management allowed. + (1) - Ethernet access to SM Management blocked." + ::={whispSmConfig 67} + + ipAccessFilterEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable IP access filtering to Management functions. + (0) - IP access will be allowed from all addresses. + (1) - IP access will be controlled using allowedIPAccess1-3 entries." + ::={whispSmConfig 68} + + allowedIPAccess1 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow access to SM Management from this IP. + 0 is default setting to allow from all IPs." + ::={whispSmConfig 69} + + allowedIPAccess2 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow access to SM Management from this IP. + 0 is default setting to allow from all IPs." + ::={whispSmConfig 70} + + allowedIPAccess3 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow access to SM Management from this IP. + 0 is default setting to allow from all IPs." + ::={whispSmConfig 71} + + rfDhcpState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable RF Interface DHCP feature." + ::={whispSmConfig 72} + +-- Broadcast MIR Feature. + + bCastMIR OBJECT-TYPE + SYNTAX INTEGER { + disabled(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable and set Broadcast/ Multicast MIR feature. Use value of 0 to disable. + Units are as per bCastMIRUnits variable. Set the units first and then set this value." + ::={whispSmConfig 73} + + bhsReReg OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Allows BHS re-registration every 24 hours. Enable allows re-registration and Disable does not. 24 Hour Encryption Refresh." + ::={whispSmConfig 74} + + smLEDModeFlag OBJECT-TYPE + SYNTAX INTEGER { + legacy(0), + revised(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set LED Panel Operation to Revised Mode(1) or to Legacy Mode(0)" + ::={whispSmConfig 75} + + ethAccessEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable Ethernet Port access to SM Management Functions. + (1) - Ethernet access to SM Management allowed. + (0) - Ethernet access to SM Management blocked." + ::={whispSmConfig 76} + + pppoeEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable PPPoE on the SM. NAT MUST be enabled prior and Translation Bridging MUST be DISABLED on the AP." + ::={whispSmConfig 77} + + pppoeAuthenticationType OBJECT-TYPE + SYNTAX INTEGER { + none(0), + chap-pap(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Authentication Type to either None or CHAP/pap" + ::={whispSmConfig 78} + + pppoeAccessConcentrator OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Access Concentrator Name. Less than or equal to 32 characters" + ::={whispSmConfig 79} + + pppoeServiceName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Service Name. Less than or equal to 32 characters" + ::={whispSmConfig 80} + + pppoeUserName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Username. Less than or equal to 32 characters" + ::={whispSmConfig 81} + + pppoePassword OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Password. Less than or equal to 32 characters" + ::={whispSmConfig 82} + + pppoeTCPMSSClampEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable TCP MSS Clamping. Enabling this will cause the SM to edit the TCP MSS in TCP SYN and SYN-ACK packets. + This will allow for a workaround for MTU issues so that the TCP session will only go up to the clamped MSS. If you are + using PMTUD reliably, this should not be needed." + ::={whispSmConfig 83} + + pppoeMTUOverrideEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the + PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, + the smaller MTU will be used." + ::={whispSmConfig 84} + + pppoeMTUOverrideValue OBJECT-TYPE + SYNTAX INTEGER (0..1492) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable the overriding of the PPP link's MTU. Normally, the PPP link will set the MTU to the MRU of the + PPPoE Server, but this may be overridden. If the MRU of the PPPoE server is smaller than the desired MTU, + the smaller MTU will be used. Max MTU of a PPPoE link is 1492." + ::={whispSmConfig 85} + + pppoeTimerType OBJECT-TYPE + SYNTAX INTEGER { + keepAlive(1), + idleTimeout(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Set the PPPoE Timer type. Can be a Keep Alive timer where the link will be checked periodically and + automatically redialed if the link is down. Also could be an Idle Timeout where the link will + be automatically dropped after an idle period and redialed if user data is present. Keep Alive timers + are in seconds while Idle Timeout timers are in minutes." + ::={whispSmConfig 86} + + pppoeTimeoutPeriod OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then + the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes. + Minimum values are 20 seconds for KeepAlive timer, and 5 minutes for Idle Timeout." + ::={whispSmConfig 87} + + timedSpectrumAnalysisDuration OBJECT-TYPE + SYNTAX INTEGER (10..1000) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "As of release 13.0.2 this value is depricated. Please use the OID in whispBoxConfig. + Value in seconds for a timed spectrum analysis. Range is 10-1000 seconds." + ::={whispSmConfig 88} + + spectrumAnalysisOnBoot OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable Spectrum Analysis on boot up for one scan through the band. + (0) - Disabled + (1) - Enabled" + ::={whispSmConfig 89} + + spectrumAnalysisAction OBJECT-TYPE + SYNTAX INTEGER { + stopSpectrumAnalysis(0), + startTimedSpectrumAnalysis(1), + startContinuousSpectrumAnalysis(2), + idleNoSpectrumAnalysis(3), + idleCompleteSpectrumAnalysis(4), + inProgressTimedSpectrumAnalysis(5), + inProgressContinuousSpectrumAnalysis(6)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "As of release 13.0.2, this OID has been deprecated. Please use the OID in whispBoxConfig. + Start or stop timed or continuous Spectrum Analysis and also give status. + (0) - Stop Spectrum Analysis + (1) - Start Timed Spectrum Analysis + (2) - Start Continuous Spectrum Analysis + (3) - Idle, no Spectrum Analysis results. + (4) - Idle, Spectrum Analysis results available. + (5) - Timed or Remote Spectrum Analysis in progress. + (6) - Continuous Spectrum Analysis in progress. + + Note: Continuous mode has a max of 24 hours." + ::={whispSmConfig 90} + + pppoeConnectOD OBJECT-TYPE + SYNTAX INTEGER { + connectOnDemand(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Force a manual PPPoE connection attempt." + ::={whispSmConfig 91} + + pppoeDisconnectOD OBJECT-TYPE + SYNTAX INTEGER { + disconnectOnDemand(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Force a manual PPPoE disconnection." + ::={whispSmConfig 92} + + smAntennaType OBJECT-TYPE + SYNTAX INTEGER { + integrated(0), + external(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Deprecated. See whispBoxStatus.antType for antenna type information." + ::={whispSmConfig 93} + +-- SM NAT Connection Type + + natConnectionType OBJECT-TYPE + SYNTAX INTEGER { + staticIP(0), + dhcp(1), + pppoe(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To configure the SM NAT connection type. Options are Static IP, DHCP, or PPPoE." + ::={whispSmConfig 94} + +-- SM WAN (NAT and/or PPPoE) Ping Reply Enable + + wanPingReplyEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allow Ping replies from SM WAN interface. Applies to both NAT and PPPoE WAN interfaces." + ::={whispSmConfig 95} + + packetFilterDirection OBJECT-TYPE + SYNTAX INTEGER { + upstream(1), + downstream(2)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To packet filter direction when NAT is disabled. Upstream is default. + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 96} + + colorCode2 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Second Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 97} + + colorCodepriority2 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the second color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 98} + + colorCode3 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Third Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 99} + + colorCodepriority3 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the third color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 100} + + colorCode4 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Fourth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 101} + + colorCodepriority4 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the fourth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 102} + + colorCode5 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Fifth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 103} + + colorCodepriority5 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the fifth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 104} + + colorCode6 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sixth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 105} + + colorCodepriority6 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the sixth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 106} + + colorCode7 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Seventh Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 107} + + colorCodepriority7 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the seventh color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 108} + + colorCode8 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Eighth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 109} + + colorCodepriority8 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the eighth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 110} + + colorCode9 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Ninth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 111} + + colorCodepriority9 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the ninth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 112} + + colorCode10 OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Tenth Color code. The variable is deprecated. See additionalColorCode in whispSmConfig." + ::={whispSmConfig 113} + + colorCodepriority10 OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3), + disable(0)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Priority setting for the tenth color code. The variable is deprecated. + See additionalColorCodePriority in whispSmConfig." + ::={whispSmConfig 114} + + natDNSProxyEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "If enabled, the SM will advertise itself as the DNS server when it sends out DHCP client leases and forward DNS queries automatically. + If disabled, the SM will forward on upstream DNS server information when it sends out DHCP client leases." + ::={whispSmConfig 115} + + allIpv4Filter OBJECT-TYPE + SYNTAX INTEGER { + filterOff(0), + filterOn(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "To set all IPv4 packet filter when NAT + is disabled. Enabling this will automatically enable all of the known IP filters (SMB, SNMP, Bootp, + IPv4 Mcast, User Defined Ports, and All Other IPv4). + Obsolete - Use corresponding OID in whipsBoxConfig MIB." + ::={whispSmConfig 116} + + spectrumAnalysisDisplay OBJECT-TYPE + SYNTAX INTEGER { + averaging(0), + instantaneous(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The display for Spectrum Analyzer: + (0) - Averaging over entire period + (1) - Instantaneous showing the last reading" + ::={whispSmConfig 117} + + syslogSMXmitSetting OBJECT-TYPE + SYNTAX INTEGER { + obtain-from-AP(0), + enable(1), + disable(2)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Obtains Syslog transmit configuration from AP/BHM if set to 0, overrides if 1 or 2. Transmits syslog data to Syslog server if enabled(1), stops if disabled (2)." + ::={whispSmConfig 118} + + syslogServerApPreferred OBJECT-TYPE + SYNTAX INTEGER { + use-local(0), + use-AP-preferred(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Uses Syslog server configuration from AP/BHM if enabled and available, + otherwise uses local configuration." + ::={whispSmConfig 119} + + syslogMinLevelApPreferred OBJECT-TYPE + SYNTAX INTEGER { + use-local(0), + use-AP-preferred(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Uses Syslog minimum transmit level configuration from AP/BHM if available, + otherwise uses local configuration." + ::={whispSmConfig 120} + + syslogSMXmitControl OBJECT-TYPE + SYNTAX INTEGER { + obtain-from-AP-default-disabled(0), + obtain-from-AP-default-enabled(1), + disable(2), + enable(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Obtains Syslog transmit configuration from AP/BHM if available, or specifies the local transmit state." + ::={whispSmConfig 121} + + eapPeerAAAServerCommonName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "THIS OID IS CURRENTLY UNUSED: EAP Peer Server Common Name" + ::={whispSmConfig 126} + + rfScanListBandFilter OBJECT-TYPE + SYNTAX INTEGER { + band5400(8), + band5700(9)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This element is obsolete." + ::={whispSmConfig 127} + + upLnkMaxBurstDataRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kilobits/sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum burst uplink rate." + ::={whispSmConfig 128} + + dwnLnkMaxBurstDataRate OBJECT-TYPE + SYNTAX INTEGER + UNITS "Kilobits/sec" + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Maximum burst downlink rate." + ::={whispSmConfig 129} + + cyclicPrefixScan OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Cyclic Prefix value for frequency scanning used by MIMO SMs only. + When setting use a comma delimited list of cyclic prefixes with no spaces. For example: 1/8,1/16" + ::={whispSmConfig 130} + + bandwidthScan OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Bandwidth values for frequency scanning used by MIMO SMs only. + When setting use a comma delimited list of bandwidths. + For example: 10, 20" + ::={whispSmConfig 131} + + apSelection OBJECT-TYPE + SYNTAX INTEGER { + powerLevel(1), + optimizeForThroughput(0)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This OID affects what AP to attempt to register to when Canopy SMs scan see more than one AP that are valid in it's configuration. + (0) - Default, Canopy radios after scanning select the best AP that will optimize for estimated throughput. + (1) - Select the AP with the best receive power level. + Note this is only if multiple APs fit the current scan configuration, and will be overriden by color codes, RADIUS, etc." + ::={whispSmConfig 132} + + radioBandscanConfig OBJECT-TYPE + SYNTAX INTEGER { + instant(0), + delayed(1), + apply(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to determine when frequency, cyclic prefix and bandwidth settings take effect for + band scanning MIMO SMs. + 0 - Instant + 1 - Delayed + 2 - Apply changes" + ::={whispSmConfig 133} + + forcepoweradjust OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This will force a multipoint SM to initiate an asynchronous power adjust sequence. + This is done automatically every 2 minutes." + ::={whispSmConfig 134} + + clearBerrResults OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This will clear the BER results." + ::={whispSmConfig 135} + + berrautoupdateflag OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This indicates if the once a second BERR updating of counters is enabled. 1 = enabled 0 = disabled" + ::={whispSmConfig 136} + + testSMBER OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0 - Disable (Return the SM to a normal operation state). + 1 - Enable (Set SM into a BER test state)." + ::={whispSmConfig 137} + + allowedIPAccessNMLength1 OBJECT-TYPE + SYNTAX INTEGER (1..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" + ::={whispSmConfig 138} + + allowedIPAccessNMLength2 OBJECT-TYPE + SYNTAX INTEGER (1..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" + ::={whispSmConfig 139} + + allowedIPAccessNMLength3 OBJECT-TYPE + SYNTAX INTEGER (1..32) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Length of the network mask to apply to the AllowedIPAddress when assessing if access is allowed" + ::={whispSmConfig 140} + + naptRemoteManage OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable-standalone(1), + enable-wan(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To enable or disable Remote Management. For multipoint only. + 0=Disable Remote Management, + 1=Enable - Standalone Config, + 2=Enable - Use WAN Interface." + ::={whispSmConfig 141} + + spectrumAnalysisScanBandwidth OBJECT-TYPE + SYNTAX INTEGER { + bandwidth5MHz(0), + bandwidth10MHz(1), + bandwidth20MHz(2), + bandwidth7MHz(3), + bandwidth15MHz(4), + bandwidth30MHz(5)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Scanning Bandwidth used for the Spectrum Analyzer. Only available on PMP 450." + ::={whispSmConfig 142} + + berDeModSelect OBJECT-TYPE + SYNTAX INTEGER { + qpsk(0), + qam-16(1), + qam-64(2), + qam-256(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The BER demodulation level the SM is set. 0 for QPSK, 1 for 16-QAM, 2 for 64-QAM, and 3 for 256-QAM." + ::={whispSmConfig 143} + + multicastVCRcvRate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Multicast VC Receive Rate" + ::={whispSmConfig 144} + + pmp430ApRegistrationOptions OBJECT-TYPE + SYNTAX INTEGER { + pmp430(1), + pmp450(2), + both(3)} + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Deprecated. The 430 SM only supports PMP 450 + interoperability mode." + ::={whispSmConfig 145} + + switchRadioModeAndReboot OBJECT-TYPE + SYNTAX INTEGER { + finishedReboot(0), + switchRadioModeAndReboot(1)} + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "As of 14.2, the 430 SM no longer supports multiple + radio modes. It only support 450 interoperability + mode." + ::={whispSmConfig 146} + + natTslTableSize OBJECT-TYPE + SYNTAX INTEGER (1024..8192) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "NAT Translation Table Size. + Range 1024-8192." + ::={whispSmConfig 147} + + ingressVIDPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ingress VID VLAN Priority." + ::={whispSmConfig 148} + + ingressVIDPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "ingress VID VLAN Priority Mode." + ::={whispSmConfig 149} + + providerVIDPriority OBJECT-TYPE + SYNTAX INTEGER (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provider VID VLAN Priority." + ::={whispSmConfig 150} + + providerVIDPriorityMode OBJECT-TYPE + SYNTAX INTEGER { + promote-IP-priority(0), + define-priority(1), + copy-inner-tag-priority(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provider VID VLAN Priority Mode." + ::={whispSmConfig 151} + + additionalColorCode OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Add an additional color code. Setting additionalColorCode and + additionalColorCodePriority adds an entry." + ::={whispSmConfig 152} + + additionalColorCodePriority OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Add an additional color code priority. Setting additionalColorCode and + additionalColorCodePriority adds an entry." + ::={whispSmConfig 153} + + deleteAdditionalColorCode OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Delete an additional color code." + ::={whispSmConfig 154} + + bCastMIRUnits OBJECT-TYPE + SYNTAX INTEGER { + kbps(0), + pps(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Units of Broadcast/ Multicast MIR value. Set units first and then bCastMIR" + ::={whispSmConfig 155} + + txPowerControl OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable Automatic control of SM TX power. + Engineering use only." + ::={whispSmConfig 157} + + bridgeTableSize OBJECT-TYPE + SYNTAX INTEGER (4..4096) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Bridge Table Size : 4 -- 4096." + ::={whispSmConfig 158} + + bridgeTableRestrict OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Restrict forwarding packets from hosts for which MAC address is not in the bridge table." + ::={whispSmConfig 159} + + maxTxPowerEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable Max Tx Power configuration. + This is used with OID maxTxPower to set the max transmit power. + This might be required in certain regions and frequency bands. + See User Guide for more information. + Enabling this will not allow a radio to transmit above its EIRP limit. + The AP's Transmit Power Control may still adjust the Tx power down. + SM only." + ::={whispSmConfig 160} + + maxTxPower OBJECT-TYPE + SYNTAX INTEGER (-30..27) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This OID is controled by OID maxTxPowerEnable. + This might be required in certain regions and frequency bands. + See user guide for more information. + Setting this will not allow a radio to transmit above its EIRP limit. + The AP's Transmit Power Control may still adjust the Tx power down. + SM only." + ::={whispSmConfig 161} + + rfScanListTable OBJECT-TYPE + SYNTAX SEQUENCE OF RfScanListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The list of configured scanning frequencies on the SM or BHS." + ::= {whispSmConfig 156} + + rfScanListEntry OBJECT-TYPE + SYNTAX RfScanListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of configured scanning frequencies on the SM or BHS." + INDEX {rfScanListFrequency} + ::= {rfScanListTable 1} + + RfScanListEntry ::= SEQUENCE{ + rfScanListFrequency INTEGER + } + + rfScanListFrequency OBJECT-TYPE + SYNTAX INTEGER (0..9000000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "RF scan list. + The frequencies vary by product and region." + ::={rfScanListEntry 1} + + numAuthCerts OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "can have a max value of 2" + ::={whispSmSecurity 2} + + authenticationEnforce OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + aaa(1), + presharedkey(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "enforce SM to register with specifed Auth Enabled AP" + ::={whispSmSecurity 3} + +-- PEAP is not supported for MPC860 platorm + + phase1 OBJECT-TYPE + SYNTAX INTEGER { + eapttls(0), + eapMSChapV2(1), + eappeap(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the outer method for EAP Authentication. + Note: PEAP is not supported for MPC860 platform." + ::={whispSmSecurity 4} + + phase2 OBJECT-TYPE + SYNTAX INTEGER { + pap(0), + chap(1), + mschapv2(2)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Select the outer method for EAP Authentication" + ::={whispSmSecurity 5} + + authOuterId OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..253)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "EAP Peer Username" + ::={whispSmSecurity 6} + + authPassword OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "EAP Peer password" + ::={whispSmSecurity 7} + + authUsername OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "EAP Peer Identity" + ::={whispSmSecurity 8} + + useRealm OBJECT-TYPE + SYNTAX INTEGER { + disable(0), + enable(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable the use of realm option." + ::={whispSmSecurity 9} + + realm OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "EAP Peer Realm" + ::={whispSmSecurity 10} + + certTable OBJECT-TYPE + SYNTAX SEQUENCE OF CertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of CA Certificates on SM." + ::= {whispSmSecurity 1} + + certEntry OBJECT-TYPE + SYNTAX CertEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of Certifcates." + INDEX {certIndex} + ::= {certTable 1} + + CertEntry ::= SEQUENCE{ + certIndex INTEGER, + cert INTEGER, + action INTEGER, + certificateDN DisplayString + } + + certIndex OBJECT-TYPE + SYNTAX INTEGER (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User information table index." + ::={certEntry 1} + + cert OBJECT-TYPE + SYNTAX INTEGER { + inactive(0), + active(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "0: Inactive 1: Active" + ::={certEntry 2} + + action OBJECT-TYPE + SYNTAX INTEGER { + noop(0), + delete(1)} + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "0: No Operation 1: Delete Certificate" + ::={certEntry 3} + + certificateDN OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Distinguished Name of Certificate 2" + ::={certEntry 4} + +-- Subscriber Modem status page + + sessionStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SM registered or not." + ::={whispSmStatus 1} + + rssi OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio signal strength index. FSK only." + ::={whispSmStatus 2} + + jitter OBJECT-TYPE + SYNTAX Gauge32 (0..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A measure of multipath interference. Applicable to FSK radios only." + ::={whispSmStatus 3} + + airDelay OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Round trip delay in bits." + ::={whispSmStatus 4} + + radioSlicingSm OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This variable is deprecated." + ::={whispSmStatus 5} + + radioTxGainSm OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio transmission gain setting. Applicable to FSK radios only." + ::={whispSmStatus 6} + + calibrationStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "Varible deprecated. Please use calibrationStatusBox." + ::={whispSmStatus 7} + + radioDbm OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rx Power level. + For MIMO this is the combined power of the horizontal and vertical paths." + ::={whispSmStatus 8} + + registeredToAp OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "AP MAC address that the SM registered to." + ::={whispSmStatus 9} + +-- DHCP client status: + + dhcpCip OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Assigned IP address to DHCP client." + ::={whispSmStatus 10} + + dhcpSip OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Public DHCP server IP." + ::={whispSmStatus 11} + + dhcpClientLease OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DHCP client lease time." + ::={whispSmStatus 12} + + dhcpCSMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Public DHCP server subnet mask." + ::={whispSmStatus 13} + + dhcpDfltRterIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Public default router IP address." + ::={whispSmStatus 14} + + dhcpcdns1 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Primary public domain name server." + ::={whispSmStatus 15} + + dhcpcdns2 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Secondary public domain name server." + ::={whispSmStatus 16} + + dhcpcdns3 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Third public domain name server." + ::={whispSmStatus 17} + + dhcpDomName OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Public domain name server." + ::={whispSmStatus 18} + + adaptRate OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VC adapt rate." + ::={whispSmStatus 20} + + radioDbmInt OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio power level(integer). + For MIMO radios this is the combined power of the horiztontal and vertical paths." + ::={whispSmStatus 21} + + dfsStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Dynamic frequency shifting status. For DFS Radio only." + ::={whispSmStatus 22} + + radioTxPwr OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Tx Power level. Valid for FSK and OFDM SMs." + ::={whispSmStatus 23} + + activeRegion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The active region of the radio." + ::={whispSmStatus 24} + + snmpBerLevel OBJECT-TYPE + SYNTAX INTEGER { + twoLevelOrMimoQPSK(2), + fourLevelOrMimo16QAM(4), + mimo64QAM(6), + mimo256QAM(8)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "BER level. + For PMP 450 systems: 2=MIMO QPSK, 4=MIMO 16-QAM, 6=MIMO64-QAM, 8=256-QAM + For non PMP 450: 2=2 level BER, 4=4 level BER." + ::={whispSmStatus 25} + + nbBitsRcvd OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of BER bits received (non MIMO platforms only)." + ::={whispSmStatus 26} + + nbPriBitsErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Primary bit errors (non MIMO platforms only)." + ::={whispSmStatus 27} + + nbSndBitsErr OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of secondary bit errors (non MIMO platforms only)." + ::={whispSmStatus 28} + + primaryBER OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "Obsoleted, invalid type to represent this data. Measured Primary Bit Error Rate." + ::={whispSmStatus 29} + + secondaryBER OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "Obsoleted, invalid type to represent this data. Measured Secondary Bit Error Rate." + ::={whispSmStatus 30} + + totalBER OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "Obsoleted, invalid type to represent this data. Measured Total Bit Error Rate." + ::={whispSmStatus 31} + + minRSSI OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Min. RSSI. Applicable to FSK radios only." + ::={whispSmStatus 32} + + maxRSSI OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Max. RSSI. Applicable to FSK radios only." + ::={whispSmStatus 33} + + minJitter OBJECT-TYPE + SYNTAX Gauge32 (0..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Min. Jitter. Applicable to FSK radios only." + ::={whispSmStatus 34} + + maxJitter OBJECT-TYPE + SYNTAX Gauge32 (0..15) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Max. Jitter. Applicable to FSK radios only." + ::={whispSmStatus 35} + + smSessionTimer OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SM current session timer." + ::={whispSmStatus 36} + + pppoeSessionStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Session Status" + ::={whispSmStatus 37} + + pppoeSessionID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Session ID" + ::={whispSmStatus 38} + + pppoeIPCPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE IPCP IP Address" + ::={whispSmStatus 39} + + pppoeMTUOverrideEn OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE MTU Override Setting" + ::={whispSmStatus 40} + + pppoeMTUValue OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE MTU Value" + ::={whispSmStatus 41} + + pppoeTimerTypeValue OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + keepAlive(1), + idleTimeout(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Timer Type. 0 is disabled, 1 is Keep Alive timer, and 2 is Idle Timeout timer." + ::={whispSmStatus 42} + + pppoeTimeoutValue OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Timeout Period. The use of this depends on the Timer Type. If the Timer Type is KeepAlive, then + the timeout period is in seconds. If the Timer Type is Idle Timeout, then the timeout period is in minutes." + ::={whispSmStatus 43} + + pppoeDNSServer1 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE DNS Server 1" + ::={whispSmStatus 44} + + pppoeDNSServer2 OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE DNS Server 2" + ::={whispSmStatus 45} + + pppoeControlBytesSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE Control Bytes Sent" + ::={whispSmStatus 46} + + pppoeControlBytesReceived OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE Control Bytes Received" + ::={whispSmStatus 47} + + pppoeDataBytesSent OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE Data Bytes Sent" + ::={whispSmStatus 48} + + pppoeDataBytesReceived OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE Data Bytes Received" + ::={whispSmStatus 49} + + pppoeEnabledStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE Enabled" + ::={whispSmStatus 50} + + pppoeTCPMSSClampEnableStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PPPoE TCP MSS Clamping Enable" + ::={whispSmStatus 51} + + pppoeACNameStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Access Concentrator In Use" + ::={whispSmStatus 52} + + pppoeSvcNameStatus OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Current PPPoE Service Name In Use" + ::={whispSmStatus 53} + + pppoeSessUptime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uptime of current PPPoE Session in ticks" + ::={whispSmStatus 54} + + primaryBERDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Primary Bit Error Rate. + Non MIMO platforms only." + ::={whispSmStatus 55} + + secondaryBERDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Secondary Bit Error Rate. + FSK platforms only." + ::={whispSmStatus 56} + + totalBERDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Measured Total Bit Error Rate. + For MIMO this is combined both paths." + ::={whispSmStatus 57} + + minRadioDbm OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum receive power of beacon in dBm. + For MIMO radios, this is only available in the vertical path." + ::={whispSmStatus 58} + + maxRadioDbm OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum receive power in dBm (rounded to nearest integer)." + ::={whispSmStatus 59} + + pppoeSessIdleTime OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Idle Time of current PPPoE Session in ticks" + ::={whispSmStatus 60} + + radioDbmAvg OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Average Receive Power of the AP's beacon in dBm. + OFDM Radios only. + For MIMO this is only the verical path, as the beacon is not transmitted on horizontal." + ::={whispSmStatus 61} + + zoltarFPGAFreqOffset OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "FPGA peek of 70001088" + ::={whispSmStatus 62} + + zoltarSWFreqOffset OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "FPGA peek of 7000108C" + ::={whispSmStatus 63} + + airDelayns OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Round trip delay in nanoseconds." + ::={whispSmStatus 64} + + currentColorCode OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Color Code of the Registered AP/BHM. A value of -1 is return when the device is not registered." + ::={whispSmStatus 65} + + currentColorCodePri OBJECT-TYPE + SYNTAX INTEGER { + none(0), + primary(1), + secondary(2), + tertiary(3)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current priority of the Registered color code" + ::={whispSmStatus 66} + + currentChanFreq OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Current Channel Frequency of the AP/BHM when in session." + ::={whispSmStatus 67} + + linkQualityBeacon OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering only. + Link Quality for incoming beacons. + For Gen II OFDM radios and forward. + For PMP 450 and forward this is vertical path." + ::={whispSmStatus 68} + + dhcpServerPktXmt OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets transmitted by SM DHCP Server" + ::={whispSmStatus 72} + + dhcpServerPktRcv OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets received by SM DHCP Server" + ::={whispSmStatus 73} + + dhcpServerPktToss OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of packets tossed by SM DHCP Server" + ::={whispSmStatus 74} + + receiveFragmentsModulationPercentage OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + The percentage of recent fragments received at which modulation. + For Gen II OFDM only and forward." + ::={whispSmStatus 86} + + fragmentsReceived1XVertical OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 1x modulation. + For GenII OFDM only and forward. + For MIMO this is the vertical path." + ::={whispSmStatus 87} + + fragmentsReceived2XVertical OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 2x modulation. + For GenII OFDM only and forward. + For MIMO this is the vertical path." + ::={whispSmStatus 88} + + fragmentsReceived3XVertical OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 3x modulation. + For GenII OFDM only and forward. + For MIMO this is the vertical path." + ::={whispSmStatus 89} + + fragmentsReceived4XVertical OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 4x modulation. + For GenII OFDM only and forward. + For MIMO this is the vertical path." + ::={whispSmStatus 90} + + linkQualityData1XVertical OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for QPSK modulation (1X). + For Gen II OFDM radios and forward only. + For MIMO this is the vertical path." + ::={whispSmStatus 91} + + linkQualityData2XVertical OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 16-QAM modulation (2X). + For Gen II OFDM radios and forward only. + For MIMO this is the vertical path." + ::={whispSmStatus 92} + + linkQualityData3XVertical OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 64-QAM modulation (3X). + For Gen II OFDM radios and forward only. + For MIMO this is the vertical path." + ::={whispSmStatus 93} + + linkQualityData4XVertical OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 256-QAM modulation (4X). + For Gen II OFDM radios and forward only. + For MIMO this is the vertical path." + ::={whispSmStatus 94} + + signalToNoiseRatioSMVertical OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An estimated signal to noise ratio based on the last received data. + For GenII OFDM only and forward. + For MIMO this is the vertical antenna. + Will return zero if Signal to Noise Ratio Calculation is disabled." + ::={whispSmStatus 95} + + rfStatTxSuppressionCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "RF Scheduler Stats DFS TX Suppression Count" + ::={whispSmStatus 96} + + bridgecbUplinkCreditRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sustained uplink data rate." + ::={whispSmStatus 97} + + bridgecbUplinkCreditLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uplink Burst Allocation." + ::={whispSmStatus 98} + + bridgecbDownlinkCreditRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sustained uplink data rate." + ::={whispSmStatus 99} + + bridgecbDownlinkCreditLimit OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Uplink Burst Allocation." + ::={whispSmStatus 100} + + mimoQpskBerDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "QPSK BER statistics. + MIMO platforms only." + ::={whispSmStatus 101} + + mimo16QamBerDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "16-QAM BER statistics + MIMO platforms only. + Engineering use only." + ::={whispSmStatus 102} + + mimo64QamBerDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "64-QAM BER statistics + MIMO platforms only. + Engineering use only." + ::={whispSmStatus 103} + + mimo256QamBerDisplay OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "256-QAM BER statistics + MIMO platforms only. + Engineering use only." + ::={whispSmStatus 104} + + mimoBerRcvModulationType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Receive modulation type. + MIMO platforms only." + ::={whispSmStatus 105} + + signalToNoiseRatioSMHorizontal OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "An estimated signal to noise ratio based on the last received data for horizontal antenna. + MIMO radios only. + Will return zero if Signal to Noise Ratio Calculation is disabled. + When operating in MIMO-A will return 0." + ::={whispSmStatus 106} + + maxRadioDbmDeprecated OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "This OID was inadvertently moved in 12.0.2. Please use maxRadioDbm. This OID is deprecated + and kept for backwards compatibility." + ::={whispSmStatus 107} + + signalStrengthRatio OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Signal Strength Ratio in dB is the power received by the vertical antenna input (dB) - + power received by the horizontal antenna input (dB). + MIMO radios only." + ::={whispSmStatus 108} + + fragmentsReceived1XHorizontal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 1x modulation. + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 109} + + fragmentsReceived2XHorizontal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 2x modulation. + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 110} + + fragmentsReceived3XHorizontal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 3x modulation. + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 111} + + fragmentsReceived4XHorizontal OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Number of fragments received in 4x modulation. + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 112} + + linkQualityData1XHorizontal OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for QPSK modulation (1X). + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 113} + + linkQualityData2XHorizontal OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 16-QAM modulation (2X). + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 114} + + linkQualityData3XHorizontal OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 64-QAM modulation (3X). + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 115} + + linkQualityData4XHorizontal OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Engineering use only. + Link Quality for the data VC for 256-QAM modulation (4X). + For MIMO radios only. + For MIMO this is the horizontal path. + Fragments received in MIMO-A will only be counted on vertical." + ::={whispSmStatus 116} + + radioDbmHorizontal OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Receive power level of the horizontal antenna in dBm. + MIMO radios only." + ::={whispSmStatus 117} + + radioDbmVertical OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Receive power level of the vertical antenna in dBm. + MIMO radios only." + ::={whispSmStatus 118} + + bridgecbDownlinkMaxBurstBitRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum burst downlink rate." + ::={whispSmStatus 119} + + bridgecbUplinkMaxBurstBitRate OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum burst uplink Rate." + ::={whispSmStatus 120} + + currentCyclicPrefix OBJECT-TYPE + SYNTAX INTEGER { + one-quarter(0), + one-eighth(1), + one-sixteenth(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Current Cyclic Prefix of the AP/BHM when in session." + ::={whispSmStatus 121} + + currentBandwidth OBJECT-TYPE + SYNTAX INTEGER { + bandwidth5mhz(1), + bandwidth7MHz(2), + bandwidth10mhz(3), + bandwidth15mhz(4), + bandwidth20mhz(5), + bandwidth30mhz(6), + bandwidth40MHz(7)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Current Bandwidth of the AP/BHM when in session." + ::={whispSmStatus 122} + + berPwrRxFPGAPathA OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "BER power level on FPGA Rx Path A of SM. Engineering Use Only." + ::={whispSmStatus 123} + + berPwrRxFPGAPathB OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "BER power level on FPGA Rx Path B of SM. Engineering Use Only." + ::={whispSmStatus 124} + + rawBERPwrRxPathA OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Raw unadjusted BER power level on FPGA Rx Path A of SM. Engineering Use Only." + ::={whispSmStatus 125} + + rawBERPwrRxPathB OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Raw unadjusted BER power level on FPGA Rx Path B of SM. Engineering Use Only." + ::={whispSmStatus 126} + + radioModeStatus OBJECT-TYPE + SYNTAX INTEGER { + undefined(0), + pmp430(1), + pmp450Interoperability(2)} + MAX-ACCESS read-only + STATUS deprecated + DESCRIPTION + "The current radio mode that SM is operating in. + PMP 430 SMs only. + As of 14.2, the 430 SM only supports PMP 450 + interoperability mode, so this will only return + pmp450Interoperability." + ::={whispSmStatus 127} + + adaptRateLowPri OBJECT-TYPE + SYNTAX INTEGER { + noSession(0), + rate1X(1), + rate2X(2), + rete3X(3), + rate4X(4), + rate6X(6), + rate8X(8)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current transmitting rate of the low priority VC. + 0 : SM is not in session + 1 : 1X QPSK SISO + 2 : 2X 16-QAM SISO or QPSK MIMO + 3 : 3X 64-QAM SISO + 4 : 4X 256-QAM SISO or 16-QAM MIMO + 6 : 6X 64-QAM MIMO + 8 : 8X 256-QAM MIMO" + ::={whispSmStatus 128} + + adaptRateHighPri OBJECT-TYPE + SYNTAX INTEGER { + noHighPriorityChannel(-1), + noSession(0), + rate1X(1), + rate2X(2), + rete3X(3), + rate4X(4), + rate6X(6), + rate8X(8)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current transmitting rate of the high priority VC. + -1 : High Priority Channel not configured + 0 : SM is not in session + 1 : 1X QPSK SISO + 2 : 2X 16-QAM SISO or QPSK MIMO + 3 : 3X 64-QAM SISO + 4 : 4X 256-QAM SISO or 16-QAM MIMO + 6 : 6X 64-QAM MIMO + 8 : 8X 256-QAM MIMO" + ::={whispSmStatus 129} + + bitErrorsQSPKpathA OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at QPSK path A. + Valid MIMO platforms only." + ::={whispSmStatus 130} + + bitErrorsQSPKpathB OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at QPSK path B. + Valid MIMO platforms only." + ::={whispSmStatus 131} + + bitErrors16QAMpathA OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 16-QAM path A. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 132} + + bitErrors16QAMpathB OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 16-QAM path B. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 133} + + bitErrors64QAMpathA OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 64-QAM path A. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 134} + + bitErrors64QAMpathB OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 64-QAM path B. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 135} + + bitErrors256QAMpathA OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 256-QAM path A. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 136} + + bitErrors256QAMpathB OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit errors received from BER packet at 256-QAM path B. + Valid MIMO platforms only. + Engineering use only." + ::={whispSmStatus 137} + + bitsReceivedPerPathModulation OBJECT-TYPE + SYNTAX Counter64 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of bit received from BER. + To calculate Bit Error Rate, take bit errors at a modulation and path and divide by this OID. + To get combined BER add errors and divide by this multiplied by each path and modulation. + i.e. MIMO QPSK combined BER = ((errors on path A) + (errors on path B))/(bits recieved per path modulation * 2) + Valid MIMO platforms only." + ::={whispSmStatus 138} + + beaconsPercentReceived OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current percentage of beacons that the SM/BHS successfully receiving." + ::={whispSmStatus 139} + + mapsPercentReceived OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PMP 450 only. + The current percentage of scheduling maps that the SM/BHS successfully receiving." + ::={whispSmStatus 140} + + natTslTableEntries OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of Entries in NAT Translation Table." + ::={whispSmStatus 141} + + maxReceivePower OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Maximum receive power level for this session. + MIMO radios only." + ::={whispSmStatus 142} + + beaconsPercentMinReceived OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percentage of the least number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes." + ::={whispSmStatus 143} + + beaconsPercentMaxReceived OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percentage of the maximum number of beacons that the SM/BHS successfully received in a 16 second window for the last 15 minutes. This will be updated only once in 15 minutes." + ::={whispSmStatus 144} + + beaconsPercentReceivedSnapshot OBJECT-TYPE + SYNTAX INTEGER (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The percentage of beacons that the SM/BHS successfully received for the last 15 minutes. This will be updated only once in 15 minutes." + ::={whispSmStatus 145} + + smSectorID OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The current Sector ID of the Registered AP/BHM. + A value of -1 is return when the device is not registered or AP/BHM does not support Sector ID." + ::={whispSmStatus 146} + + scanCycleCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of scan cycles. This increments after the SM completes scanning every configured frequency and channel bandwidth." + ::={whispSmStatus 147} + + bridgeCbErrStatBridgeDropCount OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Packet drop count for hosts with MAC address not in bridge table" + ::={whispSmStatus 148} + + dhcpServerTable OBJECT-TYPE + SYNTAX SEQUENCE OF DhcpServerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The table of DHCP server hosts." + ::= {whispSmStatus 19} + + dhcpServerEntry OBJECT-TYPE + SYNTAX DhcpServerEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Entry of DHCP server hosts." + INDEX {hostIp} + ::= {dhcpServerTable 1} + + DhcpServerEntry ::= SEQUENCE{ + hostIp IpAddress, + hostMacAddress PhysAddress, + hostLease TimeTicks + } + + hostIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DHCP server IP address." + ::={dhcpServerEntry 1} + + hostMacAddress OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Private host MAC address." + ::={dhcpServerEntry 2} + + hostLease OBJECT-TYPE + SYNTAX TimeTicks + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Lease time assigned by DHCP server host." + ::={dhcpServerEntry 3} + + whispSmConfigGroup OBJECT-GROUP + OBJECTS { + rfScanListBandFilter, + rfScanList, + powerUpMode, + lanIpSm, + lanMaskSm, + defaultGwSm, + networkAccess, + authKeySm, + enable8023link, + authKeyOption, + timingPulseGated, + naptPrivateIP, + naptPrivateSubnetMask, + naptPublicIP, + naptPublicSubnetMask, + naptPublicGatewayIP, + naptRFPublicIP, + naptRFPublicSubnetMask, + naptRFPublicGateway, + naptEnable, + arpCacheTimeout, + tcpGarbageCollectTmout, + udpGarbageCollectTmout, + natTslTableSize, + dhcpClientEnable, + dhcpServerEnable, + dhcpServerLeaseTime, + dhcpIPStart, + dnsAutomatic, + prefferedDNSIP, + alternateDNSIP, + natDNSProxyEnable, + spectrumAnalysisDisplay, + dmzIP, + dmzEnable, + dhcpNumIPsToLease, + pppoeFilter, + smbFilter, + snmpFilter, + userP1Filter, + userP2Filter, + userP3Filter, + allOtherIpFilter, + allIpv4Filter, + upLinkBCastFilter, + arpFilter, + allOthersFilter, + userDefinedPort1, + port1TCPFilter, + port1UDPFilter, + userDefinedPort2, + port2TCPFilter, + port2UDPFilter, + userDefinedPort3, + port3TCPFilter, + port3UDPFilter, + bootpcFilter, + bootpsFilter, + ip4MultFilter, + ingressVID, + ingressVIDPriority, + ingressVIDPriorityMode, + providerVIDPriority, + providerVIDPriorityMode, + lowPriorityUplinkCIR, + lowPriorityDownlinkCIR, + hiPriorityChannel, + hiPriorityUplinkCIR, + hiPriorityDownlinkCIR, + smRateAdapt, + upLnkMaxBurstDataRate, + upLnkDataRate, + upLnkLimit, + dwnLnkMaxBurstDataRate, + cyclicPrefixScan, + bandwidthScan, + apSelection, + radioBandscanConfig, + forcepoweradjust, + clearBerrResults, + berrautoupdateflag, + testSMBER, + dwnLnkDataRate, + dwnLnkLimit, + dfsConfig, + ethAccessFilterEnable, + ipAccessFilterEnable, + allowedIPAccess1, + allowedIPAccess2, + allowedIPAccess3, + allowedIPAccessNMLength1, + allowedIPAccessNMLength2, + allowedIPAccessNMLength3, + rfDhcpState, + bCastMIR, + bhsReReg, + smLEDModeFlag, + ethAccessEnable, + pppoeEnable, + pppoeAuthenticationType, + pppoeAccessConcentrator, + pppoeServiceName, + pppoeUserName, + pppoePassword, + pppoeTCPMSSClampEnable, + pppoeMTUOverrideEnable, + pppoeMTUOverrideValue, + pppoeTimerType, + pppoeTimeoutPeriod, + timedSpectrumAnalysisDuration, + spectrumAnalysisScanBandwidth, + spectrumAnalysisOnBoot, + spectrumAnalysisAction, + pppoeConnectOD, + pppoeDisconnectOD, + smAntennaType, + natConnectionType, + wanPingReplyEnable, + packetFilterDirection, + colorCode2, + colorCodepriority2, + colorCode3, + colorCodepriority3, + colorCode4, + colorCodepriority4, + colorCode5, + colorCodepriority5, + colorCode6, + colorCodepriority6, + colorCode7, + colorCodepriority7, + colorCode8, + colorCodepriority8, + colorCode9, + colorCodepriority9, + colorCode10, + colorCodepriority10, + additionalColorCode, + additionalColorCodePriority, + deleteAdditionalColorCode, + bridgeTableSize, + bridgeTableRestrict, + berDeModSelect, + multicastVCRcvRate, + syslogServerApPreferred, + syslogMinLevelApPreferred, + syslogSMXmitSetting, + syslogSMXmitControl, + bCastMIRUnits, + naptRemoteManage, + maxTxPowerEnable, + maxTxPower, + txPowerControl, + eapPeerAAAServerCommonName, + pmp430ApRegistrationOptions, + switchRadioModeAndReboot} + STATUS current + DESCRIPTION + "Canopy Subscriber Module configuration group." + ::= {whispSmGroups 1} + + whispSmStatusGroup OBJECT-GROUP + OBJECTS { + natTslTableEntries, + sessionStatus, + rssi, + jitter, + airDelay, + radioSlicingSm, + radioTxGainSm, + calibrationStatus, + radioDbm, + registeredToAp, + dhcpCip, + dhcpSip, + dhcpClientLease, + dhcpCSMask, + dhcpDfltRterIP, + dhcpcdns1, + dhcpcdns2, + dhcpcdns3, + dhcpDomName, + adaptRate, + adaptRateLowPri, + adaptRateHighPri, + bitErrorsQSPKpathA, + bitErrorsQSPKpathB, + bitErrors16QAMpathA, + bitErrors16QAMpathB, + bitErrors64QAMpathA, + bitErrors64QAMpathB, + bitErrors256QAMpathA, + bitErrors256QAMpathB, + bitsReceivedPerPathModulation, + radioDbmInt, + dfsStatus, + radioTxPwr, + activeRegion, + snmpBerLevel, + nbBitsRcvd, + nbPriBitsErr, + nbSndBitsErr, + primaryBER, + secondaryBER, + totalBER, + minRSSI, + maxRSSI, + minJitter, + maxJitter, + smSessionTimer, + pppoeSessionStatus, + pppoeSessionID, + pppoeIPCPAddress, + pppoeMTUOverrideEn, + pppoeMTUValue, + pppoeTimerTypeValue, + pppoeTimeoutValue, + pppoeDNSServer1, + pppoeDNSServer2, + pppoeControlBytesSent, + pppoeControlBytesReceived, + pppoeDataBytesSent, + pppoeDataBytesReceived, + pppoeEnabledStatus, + pppoeTCPMSSClampEnableStatus, + pppoeACNameStatus, + pppoeSvcNameStatus, + pppoeSessUptime, + primaryBERDisplay, + secondaryBERDisplay, + totalBERDisplay, + mimoQpskBerDisplay, + mimo16QamBerDisplay, + mimo64QamBerDisplay, + mimo256QamBerDisplay, + mimoBerRcvModulationType, + minRadioDbm, + maxRadioDbm, + maxRadioDbmDeprecated, + pppoeSessIdleTime, + radioDbmAvg, + zoltarFPGAFreqOffset, + zoltarSWFreqOffset, + airDelayns, + smSectorID, + scanCycleCount, + currentColorCode, + currentColorCodePri, + currentChanFreq, + linkQualityBeacon, + currentCyclicPrefix, + currentBandwidth, + berPwrRxFPGAPathA, + berPwrRxFPGAPathB, + rawBERPwrRxPathA, + rawBERPwrRxPathB, + linkQualityData1XVertical, + linkQualityData2XVertical, + linkQualityData3XVertical, + linkQualityData4XVertical, + linkQualityData1XHorizontal, + linkQualityData2XHorizontal, + linkQualityData3XHorizontal, + linkQualityData4XHorizontal, + signalToNoiseRatioSMVertical, + signalToNoiseRatioSMHorizontal, + signalStrengthRatio, + radioDbmHorizontal, + radioDbmVertical, + rfStatTxSuppressionCount, + receiveFragmentsModulationPercentage, + fragmentsReceived1XVertical, + fragmentsReceived2XVertical, + fragmentsReceived3XVertical, + fragmentsReceived4XVertical, + fragmentsReceived1XHorizontal, + fragmentsReceived2XHorizontal, + fragmentsReceived3XHorizontal, + fragmentsReceived4XHorizontal, + beaconsPercentReceived, + mapsPercentReceived, + beaconsPercentMinReceived, + beaconsPercentMaxReceived, + beaconsPercentReceivedSnapshot, + maxReceivePower, + bridgecbUplinkCreditRate, + bridgecbUplinkCreditLimit, + bridgecbDownlinkCreditRate, + bridgecbDownlinkCreditLimit, + bridgecbDownlinkMaxBurstBitRate, + bridgecbUplinkMaxBurstBitRate, + bridgeCbErrStatBridgeDropCount, + radioModeStatus} + STATUS current + DESCRIPTION + "Canopy Subscriber Module status group." + ::= {whispSmGroups 2} + + whispSmNotifGroup NOTIFICATION-GROUP + NOTIFICATIONS { + enterSpectrumAnalysis, + availableSpectrumAnalysis, + whispRadarDetected, + whispRadarEnd, + smNatWanDHCPClientEvent, + smNatRFPubDHCPClientEvent} + STATUS current + DESCRIPTION + "WHiSP SMs notification group." + ::= {whispSmGroups 3} + + whispMappingTableGroup OBJECT-GROUP + OBJECTS { + tableIndex, + protocol, + port, + localIp} + STATUS current + DESCRIPTION + "Canopy SM NAT port mapping Table group." + ::= {whispSmGroups 4} + +-- DFS events + + whispRadarDetected NOTIFICATION-TYPE + OBJECTS { + dfsStatus, + whispBoxEsn} + STATUS current + DESCRIPTION + "Radar detected transmit stopped." + ::={whispSmDfsEvent 1} + + whispRadarEnd NOTIFICATION-TYPE + OBJECTS { + dfsStatus, + whispBoxEsn} + STATUS current + DESCRIPTION + "Radar ended back to normal transmit." + ::={whispSmDfsEvent 2} + +-- Spectrum Analysis Events + + enterSpectrumAnalysis NOTIFICATION-TYPE + OBJECTS { + whispBoxEsn} + STATUS current + DESCRIPTION + "Entering spectrum analysis. + physAddress - MAC address of the SM" + ::={whispSmSpAnEvent 1} + +-- Spectrum Analysis Events + + availableSpectrumAnalysis NOTIFICATION-TYPE + OBJECTS { + whispBoxEsn} + STATUS current + DESCRIPTION + "Spectrum analysis is complete, SM is re-registered with AP and results are available. + physAddress - MAC address of the SM" + ::={whispSmSpAnEvent 2} + +-- SM NAT WAN DHCP Client Event + + smNatWanDHCPClientEvent NOTIFICATION-TYPE + OBJECTS { + dhcpCip, + whispBoxEsn} + STATUS current + DESCRIPTION + "NAT WAN DHCP Client has received a new address via DHCP." + ::={whispSmDHCPClientEvent 1} + +-- SM NAT RF Public DHCP Client Event + + smNatRFPubDHCPClientEvent NOTIFICATION-TYPE + OBJECTS { + dhcpRfPublicIp, + whispBoxEsn} + STATUS current + DESCRIPTION + "NAT RF Public DHCP Client has received a new address via DHCP." + ::={whispSmDHCPClientEvent 2} + + clearLinkStats OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to a nonzero value will clear the link stats." + ::={whispSmControls 1} + + rescan OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to a nonzero value will start the rescan. + Warning: If currently connected, this will cause the SM/BHS to drop session" + ::={whispSmControls 2} + + apEvalControl OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Setting this to 0 will clear the AP Evaluation Data." + ::={whispSmControls 3} + + whispMappingTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "NAT port mapping information table." + ::= {whispSm 5} + + whispMappingEntry OBJECT-TYPE + SYNTAX WhispMappingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Mapping table entry." + INDEX {tableIndex} + ::= {whispMappingTable 1} + + WhispMappingEntry ::= SEQUENCE{ + tableIndex INTEGER, + protocol INTEGER, + port INTEGER, + localIp IpAddress + } + + tableIndex OBJECT-TYPE + SYNTAX INTEGER (1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "User information table index." + ::={whispMappingEntry 1} + + protocol OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Protocol type: 0:both UDP and TCP, 1:UDP, 2:TCP." + ::={whispMappingEntry 2} + + port OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Application port number. e.g. 23=telnet, 21=ftp etc. Should be a positive integer." + ::={whispMappingEntry 3} + + localIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IP of local host to which the incoming packet mapped to an application should be forwarded." + ::={whispMappingEntry 4} + + whispSmTranslationTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispSmTranslationTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Translation Table." + ::= {whispSm 6} + + whispSmTranslationTableEntry OBJECT-TYPE + SYNTAX WhispSmTranslationTableEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Translation Table Entry." + INDEX {whispTranslationTableIndex} + ::= {whispSmTranslationTable 1} + + WhispSmTranslationTableEntry ::= SEQUENCE{ + whispTranslationTableIndex INTEGER, + whispTranslationTableMacAddr MacAddress, + whispTranslationTableIpAddr IpAddress, + whispTranslationTableAge Counter32 + } + + whispTranslationTableIndex OBJECT-TYPE + SYNTAX INTEGER (1..127) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index into translation table." + ::={whispSmTranslationTableEntry 1} + + whispTranslationTableMacAddr OBJECT-TYPE + SYNTAX MacAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "MAC Address of the registered entity." + ::={whispSmTranslationTableEntry 2} + + whispTranslationTableIpAddr OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ip Address of the registered entity." + ::={whispSmTranslationTableEntry 3} + + whispTranslationTableAge OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Age of the registered entity." + ::={whispSmTranslationTableEntry 4} + + whispSmColorCodeTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispSmColorCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional color code Table." + ::= {whispSm 9} + + whispSmColorCodeEntry OBJECT-TYPE + SYNTAX WhispSmColorCodeEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Additional Color code Entry." + INDEX {entryColorCode} + ::= {whispSmColorCodeTable 1} + + WhispSmColorCodeEntry ::= SEQUENCE{ + entryColorCode INTEGER, + entryColorCodePriority INTEGER + } + + entryColorCode OBJECT-TYPE + SYNTAX INTEGER (0..254) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "color code." + ::={whispSmColorCodeEntry 1} + + entryColorCodePriority OBJECT-TYPE + SYNTAX INTEGER { + primary(1), + secondary(2), + tertiary(3)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "color code priority." + ::={whispSmColorCodeEntry 2} + + whispSmAPEvalTable OBJECT-TYPE + SYNTAX SEQUENCE OF WhispSmAPEvalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "AP Eval List." + ::= {whispSm 10} + + whispSmAPEvalEntry OBJECT-TYPE + SYNTAX WhispSmAPEvalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Evaluation of AP and BHM Entries" + INDEX {evalIndex} + ::= {whispSmAPEvalTable 1} + + WhispSmAPEvalEntry ::= SEQUENCE{ + evalIndex INTEGER, + evalFrequency INTEGER, + evalChannelBandwidth INTEGER, + evalCyclicPrefix INTEGER, + evalESN PhysAddress, + evalRegion DisplayString, + evalBeaconReceivePowerCombined INTEGER, + evalBeaconReceivePowerH INTEGER, + evalBeaconReceivePowerV INTEGER, + evalFECEnable INTEGER, + evalType INTEGER, + evalAvail INTEGER, + evalAge INTEGER, + evalLockout INTEGER, + evalRegFail INTEGER, + evalRange INTEGER, + evalMaxRange INTEGER, + evalTxBER INTEGER, + evalEBCast INTEGER, + evalSessionCount INTEGER, + evalNoLuid INTEGER, + evalOutOfRange INTEGER, + evalAuthFail INTEGER, + evalEncryptFail INTEGER, + evalReScanReq INTEGER, + evalLimitReached INTEGER, + evalNoVCs INTEGER, + evalVCReserveFail INTEGER, + evalVCActFail INTEGER, + evalTxPower INTEGER, + evalReceiveTargetLevel INTEGER, + evalColorCode INTEGER, + evalBeaconVersion INTEGER, + evalSectorUserCount INTEGER, + evalSyncSrc INTEGER, + evalNumULSlots INTEGER, + evalNumDLSlots INTEGER, + evalNumULContSlots INTEGER, + evalICC INTEGER, + evalAuthentication INTEGER, + evalSMPPPoE INTEGER, + evalPToPVLAN INTEGER, + evalFramePeriod INTEGER + } + + evalIndex OBJECT-TYPE + SYNTAX INTEGER (1..16) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Index of the radio seen in the scan" + ::={whispSmAPEvalEntry 1} + + evalFrequency OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transmit Frequency in KHz" + ::={whispSmAPEvalEntry 2} + + evalChannelBandwidth OBJECT-TYPE + SYNTAX INTEGER { + bandwidth3Point5MHz(0), + bandwidth5MHz(1), + bandwidth7MHz(2), + bandwidth10MHz(3), + bandwidth15MHz(4), + bandwidth20MHz(5), + bandwidth30MHz(6), + bandwidth40MHz(7)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel Bandwidth" + ::={whispSmAPEvalEntry 3} + + evalCyclicPrefix OBJECT-TYPE + SYNTAX INTEGER { + one-quarter(0), + one-eighth(1), + one-sixteenth(2)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Cyclic Prefix value, for OFDM Radios only." + ::={whispSmAPEvalEntry 4} + + evalESN OBJECT-TYPE + SYNTAX PhysAddress + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio ESN" + ::={whispSmAPEvalEntry 5} + + evalRegion OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Region" + ::={whispSmAPEvalEntry 6} + + evalBeaconReceivePowerCombined OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Beacon Receive Power Combined in dBm(rounded to nearest integer)" + ::={whispSmAPEvalEntry 7} + + evalBeaconReceivePowerH OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Beacon Receive Power in dBm(rounded to nearest integer) for Path H(MIMO Radios only)" + ::={whispSmAPEvalEntry 8} + + evalBeaconReceivePowerV OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Beacon Receive Power in dBm(rounded to nearest integer) for Path V(MIMO Radios only)" + ::={whispSmAPEvalEntry 9} + + evalFECEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Forward Error Correction Enabled Status. + Note, this is always enabled on 450 and forward." + ::={whispSmAPEvalEntry 10} + + evalType OBJECT-TYPE + SYNTAX INTEGER { + multipoint(0), + point-to-point(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio Type (Point-to-Point or Multipoint)" + ::={whispSmAPEvalEntry 11} + + evalAvail OBJECT-TYPE + SYNTAX INTEGER { + false(0), + true(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Returns True if seen on the previous SM's scan" + ::={whispSmAPEvalEntry 12} + + evalAge OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of minutes since index was last seen" + ::={whispSmAPEvalEntry 13} + + evalLockout OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of minutes radio is currently locked out" + ::={whispSmAPEvalEntry 14} + + evalRegFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Registration Fail Count" + ::={whispSmAPEvalEntry 15} + + evalRange OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Range in feet" + ::={whispSmAPEvalEntry 16} + + evalMaxRange OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Max Range is in miles" + ::={whispSmAPEvalEntry 17} + + evalTxBER OBJECT-TYPE + SYNTAX INTEGER { + false(0), + true(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Radio is transmitting Bit Error Rate symbol or not + Note: This is always enabled on 450 and forward" + ::={whispSmAPEvalEntry 18} + + evalEBCast OBJECT-TYPE + SYNTAX INTEGER { + false(0), + true(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Broadcast Encryption status" + ::={whispSmAPEvalEntry 19} + + evalSessionCount OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Session Count" + ::={whispSmAPEvalEntry 20} + + evalNoLuid OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to No Luid" + ::={whispSmAPEvalEntry 21} + + evalOutOfRange OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to out of range" + ::={whispSmAPEvalEntry 22} + + evalAuthFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to authentication failure" + ::={whispSmAPEvalEntry 23} + + evalEncryptFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to encrypt fail" + ::={whispSmAPEvalEntry 24} + + evalReScanReq OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Rescan request count" + ::={whispSmAPEvalEntry 25} + + evalLimitReached OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times failed when trying to register with an limited AP maxed out" + ::={whispSmAPEvalEntry 26} + + evalNoVCs OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to No VCs" + ::={whispSmAPEvalEntry 27} + + evalVCReserveFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to VC reserve fail" + ::={whispSmAPEvalEntry 28} + + evalVCActFail OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of times the registration request has been rejected due to VC activate fail" + ::={whispSmAPEvalEntry 29} + + evalTxPower OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Transmit Power in dBm" + ::={whispSmAPEvalEntry 30} + + evalReceiveTargetLevel OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Receive Target Level(in dBm)(PMP only)" + ::={whispSmAPEvalEntry 31} + + evalColorCode OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Color Code" + ::={whispSmAPEvalEntry 32} + + evalBeaconVersion OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Beacon Version" + ::={whispSmAPEvalEntry 33} + + evalSectorUserCount OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sector User Count(AP only)" + ::={whispSmAPEvalEntry 34} + + evalSyncSrc OBJECT-TYPE + SYNTAX INTEGER { + generate-sync(0), + gps-sync(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sync Source(PMP only)" + ::={whispSmAPEvalEntry 35} + + evalNumULSlots OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of uplink slots" + ::={whispSmAPEvalEntry 36} + + evalNumDLSlots OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of downlink slots" + ::={whispSmAPEvalEntry 37} + + evalNumULContSlots OBJECT-TYPE + SYNTAX INTEGER + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Number of uplink contention slots(PMP only)" + ::={whispSmAPEvalEntry 38} + + evalICC OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Instalaton Color Code(PMP only)" + ::={whispSmAPEvalEntry 39} + + evalAuthentication OBJECT-TYPE + SYNTAX INTEGER { + disabled(0), + enabled(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Authentication Setting(PMP only)" + ::={whispSmAPEvalEntry 40} + + evalSMPPPoE OBJECT-TYPE + SYNTAX INTEGER { + not-supported(0), + suported(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SM PPPoE status(PMP only)" + ::={whispSmAPEvalEntry 41} + + evalPToPVLAN OBJECT-TYPE + SYNTAX INTEGER { + not-supported(0), + suported(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PToP VLAN" + ::={whispSmAPEvalEntry 42} + + evalFramePeriod OBJECT-TYPE + SYNTAX INTEGER { + twoPointFiveMs(0), + fiveMs(1)} + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Frame Period" + ::={whispSmAPEvalEntry 43} + + +END -- cgit v1.2.3