From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/calix/OCCAM-SENSOR-MIB | 539 ++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 539 insertions(+) create mode 100644 MIBS/calix/OCCAM-SENSOR-MIB (limited to 'MIBS/calix/OCCAM-SENSOR-MIB') diff --git a/MIBS/calix/OCCAM-SENSOR-MIB b/MIBS/calix/OCCAM-SENSOR-MIB new file mode 100644 index 0000000..6ae0f79 --- /dev/null +++ b/MIBS/calix/OCCAM-SENSOR-MIB @@ -0,0 +1,539 @@ +OCCAM-SENSOR-MIB DEFINITIONS ::= BEGIN + IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, Integer32, +OBJECT-IDENTITY + FROM SNMPv2-SMI + TEXTUAL-CONVENTION, TimeStamp, TruthValue, DisplayString + FROM SNMPv2-TC + SnmpAdminString + FROM SNMP-FRAMEWORK-MIB + PhysicalIndex + FROM OCCAM-ENTITY-MIB + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + occamGenericHardwareModules + FROM OCCAM-REG-MODULE; + + sensorMIB MODULE-IDENTITY + LAST-UPDATED "200104271051Z" + ORGANIZATION "Occam Networks" + CONTACT-INFO "email : support@occamnetworks.com" + DESCRIPTION + "The OCCAM-ENTITY-SENSOR-MIB is used to monitor + the values of Sensors in the BLC1100." + + REVISION "200104271051Z" + DESCRIPTION "Reformatted certain text and revised certain + description and syntax sections" + + REVISION "201004140000Z" + DESCRIPTION "Updated sensorEventType" + + REVISION "200907060000Z" + DESCRIPTION "corrected sensorEventType's syntac to + DisplayString" + + REVISION "200702220000Z" + DESCRIPTION "remove DISPLAY-HINT" + + ::= { occamGenericHardwareModules 2 } + +-- TEXTUAL-CONVENTIONS + + SensorThresholdRelation ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Sensor threshold relational operator types. + valid values are: + + lessThan(1): if the Sensor value is less than + the threshold value + lessOrEqual(2): if the Sensor value is less than or + equal to the threshold value + greaterThan(3): if the Sensor value is greater than + the threshold value + greaterOrEqual(4): if the Sensor value is greater than or + equal to the threshold value + equalTo(5): if the Sensor value is equal to + the threshold value + notEqualTo(6): if the Sensor value is not equal to + the threshold value" + + SYNTAX INTEGER{ + lessThan(1), + lessOrEqual(2), + greaterThan(3), + greaterOrEqual(4), + equalTo(5), + notEqualTo(6)} + + SensorStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "Indicates the operational status of the + Sensor. + + ok(1): The agent can read the Sensor value. + unavailable(2): The agent presently can not report + the Sensor value. + nonoperational(3): The agent believes the Sensor is broken. + The Sensor could have a hard failure + (disconnected wire), or a soft failure + such as out-of-range, jittery, or wildly + fluctuating readings." + SYNTAX INTEGER { + ok(1), + unavailable(2), + nonoperational(3) + } + + SensorValue ::= TEXTUAL-CONVENTION + DISPLAY-HINT "d" + STATUS current + DESCRIPTION + "For Sensors that measure voltsAC, voltsDC, + celsius this item is a fixed point number ranging from + -99,999 to +99,999. Use the value + -100000 to indicate underflow. Use the value + +100000 to indicate overflow. Use SensorPrecision to + indicate how many fractional digits the SensorValue has. + + For Sensors that measure rpm, this item + can take only nonnegative values, 0..99999." + + SYNTAX Integer32 ( -100000 .. 100000 ) + + SensorDataType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Sensor measurement data types. valid values are: + other(1): a measure other than + those listed below + volts(2): electric potential + celsius(3): temperature + rpm(4): fan revolutions per + minute + milliAmp(5): milliampere + microAmp(6): microampere + milliWatt(7): milliwatt + microWatt(8): microwatt + alarmInput(9): alarm Input + sdram(10): memory SDRAM + usage(11): system resource usage + count(12): ." + + SYNTAX INTEGER { + other(1), -- deprecated + volts(2), + celsius(3), + rpm(4), + milliAmp(5), + microAmp(6), + milliWatt(7), + microWatt(8), + alarmInput(9), + sdram(10), + usage(11), + count(12) + } + + SensorThresholdSeverity ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Sensor threshold severity. Valid values are: + other(1): a severity other than those + listed below. + minor(10): Minor Problem threshold. + major(20): Major Problem threshold. + critical(30): Critical Problem + Threshold." + SYNTAX INTEGER { + other(1), + minor(10), + major(20), + critical(30) + } + + SensorDataScale ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION "International System of Units (SI) prefixes." + SYNTAX INTEGER { + micro (1), -- 10^-6 + milli (2), -- 10^-3 + centi (3), -- 10^-2 + units (4), -- 10^0 + kilo (5), -- 10^3 + mega (6) -- 10^6 + } + +-- identifier statements + + sensorMIBObjects OBJECT IDENTIFIER + ::= { sensorMIB 1 } + + +--traps + + sensorMIBTraps OBJECT IDENTIFIER + ::= {sensorMIB 2 } + + sensorMIBTrapsSubID OBJECT IDENTIFIER + ::= { sensorMIBTraps 0} + +--conformance statements + + sensorMIBConformance OBJECT IDENTIFIER + ::= {sensorMIB 3 } + + sensorMIBGroups OBJECT IDENTIFIER + ::= { sensorMIBConformance 1 } + + sensorMIBCompliances OBJECT IDENTIFIER + ::= { sensorMIBConformance 2 } + + +-- +-- MIB variables +-- + + sensorValues OBJECT IDENTIFIER + ::= { sensorMIBObjects 1 } + + sensorThresholds OBJECT IDENTIFIER + ::= { sensorMIBObjects 2 } + + +-- +-- notifications +-- + + sensorThresholdNotification NOTIFICATION-TYPE + OBJECTS { sensorName, + sensorType, + sensorThresholdValue, + sensorThresholdSeverity, + sensorEventType + } + STATUS current + DESCRIPTION + "The Sensor value crossed the threshold + listed in sensorThresholdTable. + This notification is generated once each time + the Sensor value crosses the threshold. + The agent implementation guarantees prompt, timely + evaluation of threshold and generation of this + notification." + ::= { sensorMIBTrapsSubID 1 } + + + occamExtAlarmRaised NOTIFICATION-TYPE + OBJECTS { occamExtAlarmDescription } + STATUS current + DESCRIPTION + "An external alarm has been detected, the alarm + is described in the associated variable binding." + ::= {sensorMIBTrapsSubID 2} + + occamExtAlarmCleared NOTIFICATION-TYPE + OBJECTS {occamExtAlarmDescription } + STATUS current + DESCRIPTION + "The condition causing the external alarm has + been cleared, the alarm is described in the + associated variable binding." + ::={ sensorMIBTrapsSubID 3} + + + sensorMIBObjectGroups OBJECT IDENTIFIER + ::= { sensorMIBGroups 1 } + + sensorMIBEventGroups OBJECT IDENTIFIER + ::= { sensorMIBGroups 2 } + + +-- +-- compliance statements +-- + + sensorMIBCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "An Entity-MIB implementation that lists + Sensors in its entPhysicalTable must implement + this group." + + MODULE + MANDATORY-GROUPS { sensorGroup +,sensorThresholdGroup } + ::= { sensorMIBCompliances 1 } + + +-- +-- sensorTable +-- + sensorTable OBJECT-TYPE + SYNTAX SEQUENCE OF SensorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists the type, scale, and present value + of a Sensor in the BLC1100." + ::= { sensorValues 1 } + + sensorEntry OBJECT-TYPE + SYNTAX SensorEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An sensorTable entry describes the + present reading of a Sensor, the measurement units + and scale, and Sensor operational status." + INDEX { sensorIndex } + ::= { sensorTable 1 } + + SensorEntry ::= SEQUENCE { + sensorIndex PhysicalIndex, + sensorName SnmpAdminString, + sensorType SensorDataType, + sensorValue SensorValue, + sensorScale SensorDataScale, + sensorTimeStamp TimeStamp, + sensorEventType DisplayString + } + + + sensorIndex OBJECT-TYPE + SYNTAX PhysicalIndex + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION "This serves as an index for identifying + the sensor." + ::= { sensorEntry 1 } + + sensorName OBJECT-TYPE + SYNTAX SnmpAdminString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This is the textual description of the name of the + sensor.For e.g., in the BLC1100 there are two + temperature Sensors,and their locations + ExternalTempSensor and InternalTempSensor." + ::= { sensorEntry 2 } + + sensorType OBJECT-TYPE + SYNTAX SensorDataType + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the type of data reported by + the sensorValue. This variable is set by the agent at + start-up and the value does not change during + operation." + ::= { sensorEntry 3 } + + + sensorValue OBJECT-TYPE + SYNTAX SensorValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable reports the most recent measurement seen + by the Sensor. To correctly display or interpret this + variable's value, you must also know sensorType, + sensorScale, and sensorPrecision. However, you can + compare sensorValue with the threshold values given in + sensorThresholdTable without any semantic knowledge." + ::= { sensorEntry 4 } + + sensorScale OBJECT-TYPE + SYNTAX SensorDataScale + MAX-ACCESS read-only + STATUS current + DESCRIPTION "This variable indicates the exponent to apply + to sensor values reported by entSensorValue. + This variable is set by the agent at start-up + and the value does not change during operation." + ::= { sensorEntry 5 } + + sensorTimeStamp OBJECT-TYPE + SYNTAX TimeStamp + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the age of the value reported + by sensorValue" + ::= { sensorEntry 6 } + + sensorEventType OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the event type reported by + the sensor. The possible values are: + Cleared, + LowLimitExceeded, + HighLimitExceeded, + AlarmInOn, + AlarmInOff, + FanFastSpeed, + FanSlowSpeed, + wrongSfp." + ::= { sensorEntry 7 } + + occamExtAlarmDescription OBJECT-TYPE + SYNTAX DisplayString + MAX-ACCESS accessible-for-notify + STATUS current + DESCRIPTION + "This is the value of the alarm-description as + entered by the user. The string is associated with + the external alarm detection mechanism and as a + variable binding for the occamExtAlarmRaised and + occamExtAlarmCleared SNMP Traps " + ::= { sensorValues 2 } + + +-- +-- sensorThresholdTable +-- + sensorThresholdTable OBJECT-TYPE + SYNTAX SEQUENCE OF EntSensorThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This table lists the threshold severity, relation, and + comparison value for a Sensor listed in the sensor + Table." + ::= { sensorThresholds 1 } + + sensorThresholdEntry OBJECT-TYPE + SYNTAX EntSensorThresholdEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An sensorThresholdTable entry describes the + thresholds for a Sensor: the threshold severity, + the threshold value, the relation, and the + evaluation of the threshold. + Only pre-configured thresholds are listed in this table. + Entries are created by the agent at system startup." + INDEX { sensorThresholdIndex, sensorIndex} + ::= { sensorThresholdTable 1 } + + EntSensorThresholdEntry ::= SEQUENCE { + sensorThresholdIndex Integer32, + sensorThresholdSeverity SensorThresholdSeverity, + sensorThresholdRelation SensorThresholdRelation, + sensorThresholdValue SensorValue, + sensorThresholdNotificationEnable TruthValue + } + + + sensorThresholdIndex OBJECT-TYPE + SYNTAX Integer32 ( 1 .. 99999999 ) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An index that uniquely identifies an entry in + the sensorThreshold table. This index permits + the same Sensor to have several different thresholds." + ::= { sensorThresholdEntry 1 } + + + sensorThresholdSeverity OBJECT-TYPE + SYNTAX SensorThresholdSeverity + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the severity of this + threshold." + ::= { sensorThresholdEntry 2 } + + + sensorThresholdRelation OBJECT-TYPE + SYNTAX SensorThresholdRelation + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the relation between Sensor + value (sensorValue) and threshold value + senshresholdValue), required to trigger the alarm. when + evaluating the relation, sensorValue is on the left of + sensorThresholdRelation, sensorThresholdValue is on the + right. in pseudo-code, the evaluation-alarm mechanism + is: + + ... + if (sensorStatus == ok) + then + if (evaluate(sensorValue, sensorThresholdRelation, + sensorThresholdValue)) + then + if (sensorThresholdNotificationEnable == true)) + then + raise_alarm(sensorThresholdAlarmOID); + endif + endif + endif + ..." + ::= { sensorThresholdEntry 3 } + + + sensorThresholdValue OBJECT-TYPE + SYNTAX SensorValue + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This variable indicates the value of the threshold. + To correctly display or interpret this variable's value, + you must also know sensorType, sensorScale, and + sensorPrecision. + However, you can directly compare sensorValue + with the threshold values given in sensorThresholdTable + without any semantic knowledge." + ::= { sensorThresholdEntry 4 } + + + sensorThresholdNotificationEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This variable controls generation of + sensorThresholdNotification for this threshold. + When this variable is true(1), generation of + sensorThresholdNotification is enabled. When this + variable is false(2), generation of + sensorThresholdNotification is disabled. + This variable only controls generation of + sensorThresholdNotification." + ::= { sensorThresholdEntry 5 } + + +-- +-- units of conformance +-- + + sensorGroup OBJECT-GROUP + OBJECTS { sensorType , sensorValue , + sensorTimeStamp , sensorName } + STATUS current + DESCRIPTION + "The collection of objects which are used + to describe and monitor values of Entity-MIB + entPhysicalTable entries of Sensors." + ::= { sensorMIBObjectGroups 1 } + + sensorThresholdGroup OBJECT-GROUP + OBJECTS { sensorThresholdSeverity + ,sensorThresholdRelation + ,sensorThresholdValue + ,sensorThresholdNotificationEnable } + STATUS current + DESCRIPTION + "The collection of objects which are used + to describe and monitor thresholds for Sensors." + ::= { sensorMIBObjectGroups 2 } + +END -- cgit v1.2.3