From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/audiocodes/AC-SYSTEM-MIB | 12300 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 12300 insertions(+) create mode 100644 MIBS/audiocodes/AC-SYSTEM-MIB (limited to 'MIBS/audiocodes/AC-SYSTEM-MIB') diff --git a/MIBS/audiocodes/AC-SYSTEM-MIB b/MIBS/audiocodes/AC-SYSTEM-MIB new file mode 100644 index 0000000..39dd735 --- /dev/null +++ b/MIBS/audiocodes/AC-SYSTEM-MIB @@ -0,0 +1,12300 @@ + +AC-SYSTEM-MIB DEFINITIONS ::= BEGIN + + + IMPORTS + + + OBJECT-TYPE, + MODULE-IDENTITY FROM SNMPv2-SMI + TAddress, + DisplayString, + DateAndTime, TEXTUAL-CONVENTION FROM SNMPv2-TC + IpAddress FROM RFC1155-SMI + RowPointer FROM SNMPv2-TC + Unsigned32, + Integer32, + enterprises FROM SNMPv2-SMI + RowStatus FROM SNMPv2-TC + SnmpAdminString FROM SNMP-FRAMEWORK-MIB + audioCodes, + acRegistrations, + acGeneric, + acProducts,acBoardMibs FROM AUDIOCODES-TYPES-MIB + InetAddress, InetAddressType FROM INET-ADDRESS-MIB; + + +acSystem MODULE-IDENTITY + LAST-UPDATED "201408200359Z" --Wednesday, August 20 2014 + ORGANIZATION "AudioCodes Ltd" + CONTACT-INFO + "Postal: Support + AudioCodes LTD + 1 Hayarden Street + Airport City + Lod, ISRAEL 70151 + Tel: 972-3-9764000 + Fax: 972-3-9764040 + Email: support@audiocodes.com + Web: www.audiocodes.com" + + DESCRIPTION + "" + + + + ::= {acBoardMibs 10} + + + + + + + + + acSystemConfiguration OBJECT IDENTIFIER ::= {acSystem 1} + + + acSysControl OBJECT IDENTIFIER ::= {acSystemConfiguration 1} + + + acSysControlProtocolType OBJECT-TYPE + SYNTAX INTEGER { + controlProtocol-None(0) +, + controlProtocol-MGCP(1) +, + controlProtocol-MEGACO(2) +, + controlProtocol-H323(4) +, + controlProtocol-SIP(8) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the control protocol type. +Choose either: +0 = None +1 = MGCP +2 = MEGACO +4 = H.323 +8 = SIP. +Access: Offline. +AC INI-Param: MGCONTROLPROTOCOLTYPE" + ::= {acSysControl 1} + + + + acSysControlTrunkingToAnalogFunctionalityProfile OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + cASAnalog(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the Trunking to Analog Functionality +Profile. +0 = Disable +1 = Enable MelCAS/LoopStart/GroundStart to Analog Functionality +Refer to the enumerator acTrunkingToAnalogFunctionalityProfile +enum for the possible values. +Access: Offline. +AC INI-Param: TrunkingToAnalogFunctionalityProfile" + ::= {acSysControl 2} + + + + acSysTDM OBJECT IDENTIFIER ::= {acSystemConfiguration 2} + + + acSysTDMClock OBJECT IDENTIFIER ::= {acSysTDM 1} + + + acSysTDMClockSource OBJECT-TYPE + SYNTAX INTEGER { + internal(1) +, + mVIP(3) +, + network(4) +, + h110-A(8) +, + h110-B(9) +, + netReference1(10) +, + netReference2(11) +, + sC-2M(12) +, + sC-4M(13) +, + sC-8M(14) +, + bITS(15) +, + network-b(16) +, + aTM-OC3(17) +, + aTM-OC3-B(18) +, + aTM-OC12(19) +, + network-DS3-1(20) +, + network-DS3-2(21) +, + network-DS3-3(22) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the clock source on which the board synchronizes. +1 = Local oscillator +3 = MVIP +4 = PSTN Network +8 = H.110A +9 = H.110B +10 = NetRef1 +11 = NetRef2 +12 = SC2M +13 = SC4M +14 = SC8M +15 = BITS +16 = Network-B +17 = ATM-OC3 +18 = ATM-OC3-B +19 = ATM-OC12 +20 = Network-DS3-1 +21 = Network-DS3-2 +22 = Network-DS3-3 +Default = 1 +TP-1610 = 3 + +The Paramater is online for TP6310 and TP8410 . For all other +boards, the parameter is offline. +Access: Online. +AC INI-Param: TDMBUSCLOCKSOURCE" + ::= {acSysTDMClock 1} + + + + acSysTDMClockEnableFallBack OBJECT-TYPE + SYNTAX INTEGER { + manual(0) +, + autoNon-Revertive(1) +, + auto-Revertive(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the auto fallback of the clock. +Range: +0 = Manual +1 = Auto Non-Revertive +2 = Auto Revertive. +Access: Online. +AC INI-Param: TDMBUSENABLEFALLBACK" + ::= {acSysTDMClock 2} + + + + acSysTDMClockLocalReference OBJECT-TYPE + SYNTAX Unsigned32 (0..256) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When the clock source is set to Network, this parameter selects +the Trunk ID to be used as the clock synchronization source +of the board. +When using H.110/H.100 bus, this parameter also selects the +trunk used as the clock source for the NetRef clock generation +(in this case, the clock source must not be set to Network. +Range = 0 to (MAX_TRUNK _NUM-1). +Access: Online. +AC INI-Param: TDMBusLocalReference" + ::= {acSysTDMClock 3} + + + + acSysTDMClockMasterSlaveSelection OBJECT-TYPE + SYNTAX INTEGER { + acTDMBusSlaveMode(0) +, + acTDMBusMasterMode(1) +, + acH110BusSecondaryMasterMode(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets SC/MVIP/H.100/H.110 to either: + +0 = Slave mode (another board in the system must supply the +clock to the TDM bus) or Master mode (the board is the clock +source for the TDM bus) or Secondary Master mode (for H100/H110 +Bus only). +1 = H110A Master in Master mode +2 = H.110B Master. +Access: Online. +AC INI-Param: TDMBUSMASTERSLAVESELECTION" + ::= {acSysTDMClock 4} + + + + acSysTDMClockNetRefSpeed OBJECT-TYPE + SYNTAX INTEGER { + acTH110BusNetRefSpeed-8khz(0) +, + acTH110BusNetRefSpeed-1544khz(1) +, + acTH110BusNetRefSpeed-20488khz(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the NetRef frequency (for both generation and synchronization). +0 = 8 kHz +1 = 1.544 MHz +2 = 2.048 MHz. +Access: Online. +AC INI-Param: TDMBUSNETREFSPEED" + ::= {acSysTDMClock 5} + + + + acSysTDMClockAutoFallBackEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the PSTN trunk auto-fallback feature. +Access: Offline. +AC INI-Param: TDMBusPSTNAutoClockEnable" + ::= {acSysTDMClock 6} + + + + acSysTDMClockAutoFallBackRevertingEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables the PSTN trunk auto-fallback reverting feature. +Access: Offline. +AC INI-Param: TDMBusPSTNAutoClockRevertingEnable" + ::= {acSysTDMClock 7} + + + + acSysTDMClockBitsReference OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configures the BITS clock reference when the board source clock +is set to BITS and Fallback is set to manual or non-revertive. + + +1 = REF_1 +2 = REF_2. +Access: Online. +AC INI-Param: TDMBITSClockReference" + ::= {acSysTDMClock 8} + + + + acSysTDMClockPLLOutOfRange OBJECT-TYPE + SYNTAX INTEGER { + oor-9-2to12ppm(0) +, + oor-40to52ppm(1) +, + oor-100to130ppm(2) +, + oor-64to83ppm(3) +, + oor-13-8to18ppm(4) +, + oor-24-6to32ppm(5) +, + oor-36-6to47-5ppm(6) +, + oor-52to67-5ppm(7) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the valid PPM range outside the Stratum 3 standard. +This parameter is only relevant for the TP8410 on the Mediant +3000. This parameter is enabled when bspTimingModuleCfgTimingMode +is set to TM_External_MODE(1). + +One of the following possible values: OOR_9_2to12ppm(0),OOR_40to52ppm(1),OOR_100to130ppm(2),OOR_64to83ppm(3),OOR_13_8to18ppm(4),OOR_24_6to32ppm(5),OOR_36_6to47_5ppm(6),OOR_52to67_5ppm(7). +Access: Online. +AC INI-Param: PLLOutOfRange" + ::= {acSysTDMClock 9} + + + + acSysTDMClockFallbackClock OBJECT-TYPE + SYNTAX INTEGER { + network(4) +, + h110-A(8) +, + h110-B(9) +, + netReference1(10) +, + netReference2(11) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the fallback clock source on which board synchronizes +in the event of clock failure. +4 = PSTN Network +8 = H.110A +9 = H.110B +10 = NetRef1 +11 = NetRef2. +Access: Online. +AC INI-Param: TDMBusFallbackClock" + ::= {acSysTDMClock 10} + + + + acSysTDMBus OBJECT IDENTIFIER ::= {acSysTDM 2} + + + acSysTDMBusType OBJECT-TYPE + SYNTAX INTEGER { + mVIP-BUS(0) +, + sC-BUS(1) +, + uSE-FRAMERS(2) +, + qSLAC-BUS(3) +, + uSE-H110-BUS(4) +, + uSE-EXT-BUS(5) +, + aNALOG-BUS(6) +, + uSE-PSTN-SW-ONLY(8) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the TDM bus interface to be used (only one TDM bus interface +can be enabled at one time although more than one can +physically exist on the board). +Range: +0 = acMVIP_BUS +1 = acSC_BUS +2 = acFRAMERS +4 = acH100_BUS +5 = EXT TDM +6 = Analog +8 = SW Pstn + +Default: +TP-1610 and TP-2810 = 2 + TPM-1100 = 5 + TP-260 = 1. +Access: Offline. +AC INI-Param: TDMBUSTYPE" + ::= {acSysTDMBus 1} + + + + acSysTDMBusSpeed OBJECT-TYPE + SYNTAX INTEGER { + acTDMBusSpeed-2Mbps(0) +, + acTDMBusSpeed-4Mbps(2) +, + acTDMBusSpeed-8Mbps(3) +, + acTDMBusSpeed-16Mbps(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the TDM bus speed according to the Bus Type as follows: + +SC = 0/2/3 +H.110/H.100 = 3 +MVIP = 0 +Where: + +0 = 2048 kbps +2 = 4096 kbps +3 = 8192 kbps +4 = 16384 kbps +Default: TP-260 = 2 + All other boards = 3. +Access: Offline. +AC INI-Param: TDMBUSSPEED" + ::= {acSysTDMBus 2} + + + + acSysTDMBusOutputPort OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the SC/MVIP/H.100/H.110 output port to be used for the +board's channel #0. All other channels then occupy the next +timeslots sequentially. +Range: +0 to 15 for SC/MVIP +0 to 31 for H.110. +Access: Offline. +AC INI-Param: TDMBUSOUTPUTPORT" + ::= {acSysTDMBus 3} + + + + acSysTDMBusOutputStartingChannel OBJECT-TYPE + SYNTAX Unsigned32 (0..127) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the outgoing TDM Timeslot for board's channel #0. The +remaining channels are organized sequentially. +Access: Offline. +AC INI-Param: TDMBUSOUTPUTSTARTINGCHANNEL" + ::= {acSysTDMBus 4} + + + + acSysPCM OBJECT IDENTIFIER ::= {acSysTDM 3} + + + acSysPCMLawSelect OBJECT-TYPE + SYNTAX INTEGER { + muLaw(3) +, + aLaw(1) +, + automatic(0) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Selects the type of PCM companding law in input/output TDM bus +(TDM bus is defined using the TDMBusType parameter). + +1 = A-law +3 = Mu-Law. +Access: Offline. +AC INI-Param: PCMLAWSELECT" + ::= {acSysPCM 1} + + + + acSysPCMIdlePattern OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the PCM pattern applied to the E1/T1 timeslot (B-channel) +when the channel is idle. +Default: +0xFF if PCMLawSelect is Mu-Law +0xD5 if PCMLawSelect is A-Law +Range = 0x00 to 0xFF. +Access: Offline. +AC INI-Param: IDLEPCMPATTERN" + ::= {acSysPCM 2} + + + + acSysPCMIdleABCDPattern OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ABCD (CAS) pattern to be applied on the signaling +bus before it is changed by the user or the PSTN protocol. +This is only relevant when using PSTN interface with CAS protocols. +Range = 0x0 to 0xF. +Access: Offline. +AC INI-Param: IDLEABCDPATTERN" + ::= {acSysPCM 3} + + + + acSysPCMSerialPortAuditIntervalMin OBJECT-TYPE + SYNTAX Unsigned32 (0..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Interval timeout in minutes, of the Serial Port audit. In case +of 0 value, the audit isn't running. +Access: Offline. +AC INI-Param: SerialPortAuditIntervalMin" + ::= {acSysPCM 4} + + + + acSysNetworkConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 3} + + + acSysIP OBJECT IDENTIFIER ::= {acSysNetworkConfig 1} + + + acSysIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Board IP Address. In human readable form. + in host byte order e.g. 192.10.1.2 = 0xc00a0102). + Users should set the subnet mask to a valid value per the +IP address. +Access: Online. +AC INI-Param: N/A" + ::= {acSysIP 1} + + + + acSysIPSubNetAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Board SubNet Address. In human readable form. + (in host byte order e.g. 255.255.255.0 = 0xffffff00). + default =255.255.255.0. +Access: Online. +AC INI-Param: N/A" + ::= {acSysIP 2} + + + + acSysIPDefaultGatewayAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Default Gateway Address. + Board's Default Gateway IP address. In human readable form. + (in host byte order e.g. 192.10.1.255 = 0xc00a01ff). +Access: Online. +AC INI-Param: N/A" + ::= {acSysIP 3} + + + + acSysIPDHCPEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables DHCP support. + +0 = Disable +1 = Enable + +After the gateway is powered up, it attempts to communicate +with a BootP server. If a BootP server does not respond and +if DHCP is enabled, the gateway attempts to obtain its IP address +and other network parameters from the DHCP server. +Note that throughout the DHCP procedure, the BootP/TFTP application +must be deactivated. If it isn’t deactivated, the gateway +receives a response from the BootP server instead of +the DHCP server. +For additional information on DHCP, refer to the product documentation. + +Note: DHCPEnable is a special ‘Hidden’ parameter. Once defined +and saved in flash memory, its assigned value doesn’t revert +to its default even if the parameter doesn't appear in +the INI file. +Access: Online. +AC INI-Param: DHCPEnable" + ::= {acSysIP 4} + + + + acSysIPDHCPSpeedFactor OBJECT-TYPE + SYNTAX Unsigned32 (0..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the DHCP renewal speed. When set to 0, the DHCP lease +renewal is disabled. Otherwise, the renewal time is divided +by this factor. Some DHCP-enabled routers perform better +when set to 4. + +0 = Disable DHCP +1 = Normal +2 to 10 = Fast. +Access: Offline. +AC INI-Param: DHCPSpeedFactor" + ::= {acSysIP 5} + + + + acSysIPDnsPrimaryServerType OBJECT-TYPE + SYNTAX INTEGER { + ipv4(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the DNS primary server's IP address type. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysIP 6} + + + + acSysIPDnsPrimaryServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the DNS primary server's IP address. +Range = Legal IP address. +Access: Offline. +AC INI-Param: DNSPriServerIP" + ::= {acSysIP 7} + + + + acSysIPDnsSecondaryServerType OBJECT-TYPE + SYNTAX INTEGER { + ipv4(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the DNS secondary server's IP address +type. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysIP 8} + + + + acSysIPDnsSecondaryServer OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the DNS secondary server's IP address. +Range = Legal IP address. +Access: Offline. +AC INI-Param: DNSSecServerIP" + ::= {acSysIP 9} + + + + acSysIPDHCPLeaseRenewalEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Enables/disables DHCP renewal support. +This paramater will only take effect if DHCPEnable = 0. + +After the gateway is powered up, it attempts to communicate +with a BootP server. If a BootP server does not respond and +if DHCP is disabled, the gateway will boot from flash. It will +then attempt to communicate with the DHCP server to renew +the lease. +Note that throughout the DHCP procedure, the BootP/TFTP application +must be deactivated. If it isn’t deactivated, the gateway +receives a response from the BootP server instead of +the DHCP server. +For additional information on DHCP, refer to the product documentation. + + +For cases where the booting the board via DHCP is not desirable, +but renewing DHCP leasing is. if DHCPEnable = 1, this +paramater will not have any effect. +Access: Online. +AC INI-Param: EnableDHCPLeaseRenewal" + ::= {acSysIP 10} + + + + acSysIPWanInterfaceName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..38)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the WAN interface name to be used by VOIP signalling applications. +see CLI documentation for interface name formats. +Access: Offline. +AC INI-Param: WanInterfaceName" + ::= {acSysIP 11} + + + + acMultipleIP OBJECT IDENTIFIER ::= {acSysIP 30} + + + acMultipleIPEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Enables the multiple IPs feature. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: EnableMultipleIPs" + ::= {acMultipleIP 1} + + + + acMultipleIPEnableTPNCPasOAM OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the TPNCP location on the Operation, Administration and +Management (OAM) network, when operating in multiple IPs mode. +If this parameter is set and the machine is working in multiple +IPs mode, TPNCP is located on the OAM network. + +0 = TPNCP on Control network +1 = TPNCP on OAM network. +Access: Offline. +AC INI-Param: EnableTPNCPasOAM" + ::= {acMultipleIP 2} + + + + acMultipleIPEnableDNSasOAM OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the location of the DNS. If this parameter is set and the +machine is functioning in multiple IPs mode, the DNS is located +on the OAM network. If not, the DNS is on the control +network. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: EnableDNSasOAM" + ::= {acMultipleIP 3} + + + + acMultipleIPEnableNTPasOAM OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the location of the Network Time Protocol (NTP). If this +parameter is set and the machine is functioning in multiple +IPs mode, the NTP is located on the OAM network. If not, the +NTP is located on the control network. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: EnableNTPasOAM" + ::= {acMultipleIP 4} + + + + acMultipleIPEnableSCTPasControl OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the location of the Stream Control Transmission Protocol +(SCTP). If this parameter is set and the machine is functioning +in multiple IPs mode, the SCTP is located on the control +network. If not, the SCTP is located on the OAM network. + +0 = Default +1 = Enable. +Access: Offline. +AC INI-Param: EnableSCTPasControl" + ::= {acMultipleIP 5} + + + + acMultipleIPEnableNetwotkSeparation OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables Network Physical Separation. Allows the user to have +separate port for each Network. Requires suitable hardware. + +0 = Disabled +1 = Enabled. +Access: Offline. +AC INI-Param: ENABLENETWORKPHYSICALSEPARATION" + ::= {acMultipleIP 6} + + + + acMultipleIPInterfaceTableAction OBJECT-TYPE + SYNTAX INTEGER { + done(1) +, + validateConfiguration(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is an action object. Set this to validateConfiguration(2) +when you want the configuration in the acSysInterfaceTable +to be validated immediately (as opposed to at reset). done(1) +is the default value for any GET on this object. The results +of the action should be followed in the syslog. +Access: Instant. +AC INI-Param: N/A" + ::= {acMultipleIP 7} + + + + -- **************************************** + -- acNetworkIP table declaration + -- **************************************** + acNetworkIPTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcNetworkIPEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "IP control table. Enables to add, remove or configure the device's networks." + ::= {acMultipleIP 21} + + + + -- **************************************** + -- acNetworkIP table entry + -- **************************************** + acNetworkIPEntry OBJECT-TYPE + SYNTAX AcNetworkIPEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "" + INDEX {acNetworkIPIndex} + ::= {acNetworkIPTable 1} + + + + -- **************************************** + -- acNetworkIP TABLE + -- **************************************** + AcNetworkIPEntry ::= SEQUENCE { + acNetworkIPIndex INTEGER, + acNetworkIPIfIndex Unsigned32, + acNetworkIPLocalIPAddress IpAddress, + acNetworkIPLocalSubnetMask IpAddress, + acNetworkIPLocalDefGW IpAddress, + acNetworkIPAdminState INTEGER + } + + + + acNetworkIPIndex OBJECT-TYPE + SYNTAX INTEGER { + oam(1) +, + media(2) +, + control(3) + + } + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "The row's index. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 1} + + + + acNetworkIPIfIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..2) + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "The row's index in the IF MIB. +The IF MIB is not yet supported and so for now this is the +same as the ipCidrRouteIfIndex object. +0 = OAM +1 = Media +2 = Control. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 2} + + + + acNetworkIPLocalIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the IP address of the OAM (Operation, Administration & +Management) when operating in multiple IPs mode. + +Range: Legal IP address +Default = 0.0.0.0. +Access: Online. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 3} + + + + acNetworkIPLocalSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the Subnet Mask for the OAM interface, when operating in +multiple IPs mode. + +Range: Legal Subnet +Default = 0.0.0.0. +Access: Online. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 4} + + + + acNetworkIPLocalDefGW OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the Default gateway for the OAM interface when operating +in multiple IPs mode. + +Range: Legal IP address in subnet +Default = 0.0.0.0. +Access: Online. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 5} + + + + acNetworkIPAdminState OBJECT-TYPE + SYNTAX INTEGER { + lock(1) +, + unLock(2) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines if a row is currentely active or not. +Lock(1) - the row is in configuration (non active) state. +UnLock(2) - row is in active state. +Access: Online. +AC INI-Param: N/A" + ::= {acNetworkIPEntry 6} + + + + -- **************************************** + -- acSysInterface table declaration + -- **************************************** + acSysInterfaceTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Multiple Interfaces' Interface Table" + ::= {acMultipleIP 22} + + + + -- **************************************** + -- acSysInterface table entry + -- **************************************** + acSysInterfaceEntry OBJECT-TYPE + SYNTAX AcSysInterfaceEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysInterfaceIndex} + ::= {acSysInterfaceTable 1} + + + + -- **************************************** + -- acSysInterface TABLE + -- **************************************** + AcSysInterfaceEntry ::= SEQUENCE { + acSysInterfaceIndex Unsigned32, + acSysInterfaceRowStatus RowStatus, + acSysInterfaceAction INTEGER, + acSysInterfaceActionRes INTEGER, + acSysInterfaceApplicationTypes INTEGER, + acSysInterfaceMode INTEGER, + acSysInterfaceIPAddress SnmpAdminString, + acSysInterfacePrefixLength Unsigned32, + acSysInterfaceGateway SnmpAdminString, + acSysInterfaceVlanID Unsigned32, + acSysInterfaceName SnmpAdminString, + acSysInterfacePrimaryDNSServerIPAddress SnmpAdminString, + acSysInterfaceSecondaryDNSServerIPAddress SnmpAdminString, + acSysInterfaceUnderlyingInterface RowPointer + } + + + + acSysInterfaceIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. +AC INI-Param: InterfaceTable_Index" + ::= {acSysInterfaceEntry 1} + + + + acSysInterfaceRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS Field for line. +AC INI-Param: InterfaceTable_RowStatus" + ::= {acSysInterfaceEntry 2} + + + + acSysInterfaceAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. +AC INI-Param: InterfaceTable_Action" + ::= {acSysInterfaceEntry 3} + + + + acSysInterfaceActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. +AC INI-Param: InterfaceTable_ActionRes" + ::= {acSysInterfaceEntry 4} + + + + acSysInterfaceApplicationTypes OBJECT-TYPE + SYNTAX INTEGER { + oam(0) +, + media(1) +, + control(2) +, + oamAndMedia(3) +, + oamAndControl(4) +, + mediaAndControl(5) +, + oamAndMediaAndControl(6) +, + maintenance(99) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The type assigned to the interface. +Access: Offline. +AC INI-Param: InterfaceTable_ApplicationTypes" + ::= {acSysInterfaceEntry 5} + + + + acSysInterfaceMode OBJECT-TYPE + SYNTAX INTEGER { + iPv6PrefixManual(3) +, + iPv6Manual(4) +, + iPv4Manual(10) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Interface configuration mode. +Access: Offline. +AC INI-Param: InterfaceTable_InterfaceMode" + ::= {acSysInterfaceEntry 6} + + + + acSysInterfaceIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP Address (can be either IPv4 or IPv6) for this interface. +Access: Online. +AC INI-Param: InterfaceTable_IPAddress" + ::= {acSysInterfaceEntry 7} + + + + acSysInterfacePrefixLength OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The number of ‘1’ bits in this interface’s netmask. +Access: Offline. +AC INI-Param: InterfaceTable_PrefixLength" + ::= {acSysInterfaceEntry 8} + + + + acSysInterfaceGateway OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Default Gateway. Filled in one row only. 0 in others. +Access: Offline. +AC INI-Param: InterfaceTable_Gateway" + ::= {acSysInterfaceEntry 9} + + + + acSysInterfaceVlanID OBJECT-TYPE + SYNTAX Unsigned32 (0..4094) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "VLAN ID of this interface. +Access: Offline. +AC INI-Param: InterfaceTable_VlanID" + ::= {acSysInterfaceEntry 10} + + + + acSysInterfaceName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "a 16 character string of this interface’s name. +Access: Offline. +AC INI-Param: InterfaceTable_InterfaceName" + ::= {acSysInterfaceEntry 11} + + + + acSysInterfacePrimaryDNSServerIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Primary DNS server IP address. +Access: Online. +AC INI-Param: InterfaceTable_PrimaryDNSServerIPAddress" + ::= {acSysInterfaceEntry 12} + + + + acSysInterfaceSecondaryDNSServerIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Secondary DNS server IP address. +Access: Online. +AC INI-Param: InterfaceTable_SecondaryDNSServerIPAddress" + ::= {acSysInterfaceEntry 13} + + + + acSysInterfaceUnderlyingInterface OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Multiple Interfaces' Interface Table. +Access: Offline. +AC INI-Param: InterfaceTable_UnderlyingInterface" + ::= {acSysInterfaceEntry 14} + + + + -- **************************************** + -- acSysPhysicalPorts table declaration + -- **************************************** + acSysPhysicalPortsTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysPhysicalPortsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Physical Ports Table" + ::= {acMultipleIP 23} + + + + -- **************************************** + -- acSysPhysicalPorts table entry + -- **************************************** + acSysPhysicalPortsEntry OBJECT-TYPE + SYNTAX AcSysPhysicalPortsEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysPhysicalPortsIndex} + ::= {acSysPhysicalPortsTable 1} + + + + -- **************************************** + -- acSysPhysicalPorts TABLE + -- **************************************** + AcSysPhysicalPortsEntry ::= SEQUENCE { + acSysPhysicalPortsIndex Unsigned32, + acSysPhysicalPortsRowStatus RowStatus, + acSysPhysicalPortsAction INTEGER, + acSysPhysicalPortsActionRes INTEGER, + acSysPhysicalPortsPort SnmpAdminString, + acSysPhysicalPortsMode INTEGER, + acSysPhysicalPortsNativeVlan Unsigned32, + acSysPhysicalPortsSpeedDuplex INTEGER, + acSysPhysicalPortsPortDescription SnmpAdminString, + acSysPhysicalPortsGroupMember SnmpAdminString, + acSysPhysicalPortsGroupStatus SnmpAdminString + } + + + + acSysPhysicalPortsIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..5) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. +AC INI-Param: PhysicalPortsTable_Index" + ::= {acSysPhysicalPortsEntry 1} + + + + acSysPhysicalPortsRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS Field for line. +AC INI-Param: PhysicalPortsTable_RowStatus" + ::= {acSysPhysicalPortsEntry 2} + + + + acSysPhysicalPortsAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. +AC INI-Param: PhysicalPortsTable_Action" + ::= {acSysPhysicalPortsEntry 3} + + + + acSysPhysicalPortsActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. +AC INI-Param: PhysicalPortsTable_ActionRes" + ::= {acSysPhysicalPortsEntry 4} + + + + acSysPhysicalPortsPort OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..17)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Physical Ports Table. +AC INI-Param: PhysicalPortsTable_Port" + ::= {acSysPhysicalPortsEntry 5} + + + + acSysPhysicalPortsMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port Enable/Disable. +AC INI-Param: PhysicalPortsTable_Mode" + ::= {acSysPhysicalPortsEntry 6} + + + + acSysPhysicalPortsNativeVlan OBJECT-TYPE + SYNTAX Unsigned32 (0..4096) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port's Native VID or PVID. +Access: Offline. +AC INI-Param: PhysicalPortsTable_NativeVlan" + ::= {acSysPhysicalPortsEntry 7} + + + + acSysPhysicalPortsSpeedDuplex OBJECT-TYPE + SYNTAX INTEGER { + s10BaseTHalfDuplex(0) +, + s10BaseTFullDuplex(1) +, + s100BaseTHalfDuplex(2) +, + s100BaseTFullDuplex(3) +, + autoNegotiation(4) +, + s1000BaseTHalfDuplex(6) +, + s1000BaseTFullDuplex(7) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port's Speed and Duplex Mode. +Access: Offline. +AC INI-Param: PhysicalPortsTable_SpeedDuplex" + ::= {acSysPhysicalPortsEntry 8} + + + + acSysPhysicalPortsPortDescription OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..17)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port's User Description. +Access: Offline. +AC INI-Param: PhysicalPortsTable_PortDescription" + ::= {acSysPhysicalPortsEntry 9} + + + + acSysPhysicalPortsGroupMember OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..17)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Physical Ports Table. +AC INI-Param: PhysicalPortsTable_GroupMember" + ::= {acSysPhysicalPortsEntry 10} + + + + acSysPhysicalPortsGroupStatus OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..17)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Active or Redundant Status. +AC INI-Param: PhysicalPortsTable_GroupStatus" + ::= {acSysPhysicalPortsEntry 11} + + + + -- **************************************** + -- acSysEtherGroup table declaration + -- **************************************** + acSysEtherGroupTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysEtherGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ether Group Table" + ::= {acMultipleIP 24} + + + + -- **************************************** + -- acSysEtherGroup table entry + -- **************************************** + acSysEtherGroupEntry OBJECT-TYPE + SYNTAX AcSysEtherGroupEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysEtherGroupIndex} + ::= {acSysEtherGroupTable 1} + + + + -- **************************************** + -- acSysEtherGroup TABLE + -- **************************************** + AcSysEtherGroupEntry ::= SEQUENCE { + acSysEtherGroupIndex Unsigned32, + acSysEtherGroupRowStatus RowStatus, + acSysEtherGroupAction INTEGER, + acSysEtherGroupActionRes INTEGER, + acSysEtherGroupGroup SnmpAdminString, + acSysEtherGroupMode INTEGER, + acSysEtherGroupMember1 RowPointer, + acSysEtherGroupMember2 RowPointer + } + + + + acSysEtherGroupIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..5) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. +AC INI-Param: EtherGroupTable_Index" + ::= {acSysEtherGroupEntry 1} + + + + acSysEtherGroupRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS Field for line + Static table - only notInService/active supported. +AC INI-Param: EtherGroupTable_RowStatus" + ::= {acSysEtherGroupEntry 2} + + + + acSysEtherGroupAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. +AC INI-Param: EtherGroupTable_Action" + ::= {acSysEtherGroupEntry 3} + + + + acSysEtherGroupActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. +AC INI-Param: EtherGroupTable_ActionRes" + ::= {acSysEtherGroupEntry 4} + + + + acSysEtherGroupGroup OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ethernet Group's Name. +AC INI-Param: EtherGroupTable_Group" + ::= {acSysEtherGroupEntry 5} + + + + acSysEtherGroupMode OBJECT-TYPE + SYNTAX INTEGER { + oneRXoneTX(2) +, + twoRXoneTX(3) +, + twoRXtwoTX(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Group Mode of Operation. +Access: Offline. +AC INI-Param: EtherGroupTable_Mode" + ::= {acSysEtherGroupEntry 6} + + + + acSysEtherGroupMember1 OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "First Member of the Group. +Select the OID corresponding to the one appearing in the Physical +Ports table. +The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5. +acSysPhysicalPortsPort. +Access: Offline. +AC INI-Param: EtherGroupTable_Member1" + ::= {acSysEtherGroupEntry 7} + + + + acSysEtherGroupMember2 OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Second Member of the Group. +Select the OID corresponding to the one appearing in the Physical +Ports table. +The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.23.1.5. +acSysPhysicalPortsPort. +Access: Offline. +AC INI-Param: EtherGroupTable_Member2" + ::= {acSysEtherGroupEntry 8} + + + + acSyslog OBJECT IDENTIFIER ::= {acSysNetworkConfig 2} + + + acSyslogServerIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the IP address in dotted format notation. +e.g., 192.10.1.255 +Range = Legal IP address. +Access: Online. +AC INI-Param: SYSLOGSERVERIP" + ::= {acSyslog 1} + + + + acSyslogEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable SysLog protocol log. +Access: Online. +AC INI-Param: ENABLESYSLOG" + ::= {acSyslog 2} + + + + acSyslogAcSyslogServerPortNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Port number of the Syslog Server. +Range = Legal Port Number. +Access: Online. +AC INI-Param: SyslogServerPort" + ::= {acSyslog 3} + + + + acSyslogFacility OBJECT-TYPE + SYNTAX Unsigned32 (16..23) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "parameter to determine the facility number at syslog messages. +can be: +16 = local use 0 (local0) +17 = local use 1 (local1) +.. +23 = local use 0 (local7). +Access: Online. +AC INI-Param: SyslogFacility" + ::= {acSyslog 4} + + + + acSysNTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 3} + + + acSysNTPServerIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to define the NTP server's IP address. +Range = Legal IP address. +Access: Instant. +AC INI-Param: NTPServerIP" + ::= {acSysNTP 1} + + + + acSysNTPUtcOffset OBJECT-TYPE + SYNTAX Integer32 (-43200..43200) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to define the NTP time to offset, in +seconds. + +Default = 0 +Range = -43200 to +43200 seconds. +Access: Instant. +AC INI-Param: NTPServerUTCOffset" + ::= {acSysNTP 2} + + + + acSysNTPUpdateInterval OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the NTP update interval, in seconds. +It's inadvisable to set it exceeding 1 month (2592000 seconds). +Range = 0 to 2592000 seconds +Default = 86400 seconds. +Access: Instant. +AC INI-Param: NTPUpdateInterval" + ::= {acSysNTP 3} + + + + acSysNTPSecondaryServerIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the NTP Secondary Server IP address. +Access: Instant. +AC INI-Param: NTPSecondaryServerIP" + ::= {acSysNTP 4} + + + + acSysDayLightSavingTime OBJECT IDENTIFIER ::= {acSysNTP 21} + + + acSysDayLightSavingTimeMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to enable the time ajustment to day light +saving time while update time from NTP server. +Access: Instant. +AC INI-Param: DayLightSavingTimeEnable" + ::= {acSysDayLightSavingTime 1} + + + + acSysDayLightSavingTimeOffset OBJECT-TYPE + SYNTAX Unsigned32 (0..120) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "when DayLightSavingTimeEnable is Enable, this parametes determine +the fix size in minutes: 0-120. +Access: Instant. +AC INI-Param: DayLightSavingTimeOffset" + ::= {acSysDayLightSavingTime 2} + + + + acSysDayLightSavingTimeStart OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the date and time of starting day light +time in current year. +2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day +of Month) mo:wday/week:hh:mm where week of month is 01-04, or +05 for specifying last week of the month, and wday is one +of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT. +Access: Instant. +AC INI-Param: DayLightSavingTimeStart" + ::= {acSysDayLightSavingTime 3} + + + + acSysDayLightSavingTimeEnd OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the date and time of ending day light +time in current year. +2 Possible Formats: 1. (Day of Year) mo:dd:hh:mm . 2. (Day +of Month) mo:wday/week:hh:mm where week of month is 01-04, or +05 for specifying last week of the month, and wday is one +of the Week Days: SUN, MON, TUE, WED, THU, FRI, SAT. +Access: Instant. +AC INI-Param: DayLightSavingTimeEnd" + ::= {acSysDayLightSavingTime 4} + + + + acSysWEB OBJECT IDENTIFIER ::= {acSysNetworkConfig 4} + + + acSysWEBConfigDisable OBJECT-TYPE + SYNTAX INTEGER { + enable(0) +, + disable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables Web Configuration. +0 = Read & Write mode (default) +1 = Read Only mode. +Access: Offline. +AC INI-Param: DISABLEWEBCONFIG" + ::= {acSysWEB 1} + + + + acSysWEBHTTPSOnly OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Use this parameter to allow only HTTPS connections (force security). +When set to 1, unencrypted HTTP (normally, port 80) +is blocked. +Access: Offline. +AC INI-Param: HTTPSOnly" + ::= {acSysWEB 2} + + + + acSysWEBHTTPSPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determine the local Secure HTTPS port of the device. +The default port is 443. +Range = 1-65535 (other restrictions may apply in this range). +Access: Offline. +AC INI-Param: HTTPSPORT" + ::= {acSysWEB 3} + + + + acSysWEBWebUseRadiusLogin OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Uses the RADIUS (Remote Authentication Dial-In User Server/Service) +for Web interface authentication. +Make sure that ENABLERADIUS is on. +Use of this parameter without HTTPSONLY = 1 is not recommended. +Access: Instant. +AC INI-Param: WEBRADIUSLOGIN" + ::= {acSysWEB 4} + + + + acSysWEBHTTPSCipherString OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..200)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Requires client certificates for HTTPS connection. The client +certificate must be preloaded on the gateway, and its matching +private key must be installed on the managing computer. +Time and date must be correctly set on the gateway, for the +client certificate to be verified. +Access: Offline. +AC INI-Param: HTTPSCipherString" + ::= {acSysWEB 5} + + + + acSysWEBDenyAuthenticationTimer OBJECT-TYPE + SYNTAX Unsigned32 (0..86400) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the time the next authentication attempt from the last +authentication faild IP should be denied. + +The range can be any value from 0 - 86400 in seconds. +Access: Online. +AC INI-Param: DenyAuthenticationTimer " + ::= {acSysWEB 6} + + + + acSysWEBWanHttpPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines the WAN HTTP port of the device. +If set to 0, WAN HTTP access will not be possible. +Range = 0 to 65535 (other restrictions may apply in this range). +Access: Offline. +AC INI-Param: WanMgmtHttpPort" + ::= {acSysWEB 7} + + + + acSysWEBWanHttpsPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines the WAN HTTPS port of the device. +If set to 0, WAN HTTPS access will not be possible. +Range = 0 to 65535 (other restrictions may apply in this range). +Access: Offline. +AC INI-Param: WanMgmtHttpsPort" + ::= {acSysWEB 8} + + + + acSysWEBAllowWanHttp OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables WAN access to the management interface via +HTTP. +Access: Offline. +AC INI-Param: AllowWanHttp" + ::= {acSysWEB 9} + + + + acSysWEBAllowWanHttps OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables WAN access to the management interface via +HTTPS. +Access: Offline. +AC INI-Param: AllowWanHttps" + ::= {acSysWEB 10} + + + + -- **************************************** + -- acSysWEBACL table declaration + -- **************************************** + acSysWEBACLTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysWEBACLEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Access control list for the WEB." + ::= {acSysWEB 21} + + + + -- **************************************** + -- acSysWEBACL table entry + -- **************************************** + acSysWEBACLEntry OBJECT-TYPE + SYNTAX AcSysWEBACLEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysWEBACLIndex} + ::= {acSysWEBACLTable 1} + + + + -- **************************************** + -- acSysWEBACL TABLE + -- **************************************** + AcSysWEBACLEntry ::= SEQUENCE { + acSysWEBACLIndex Unsigned32, + acSysWEBACLIP IpAddress + } + + + + acSysWEBACLIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "WEB ACL (Access Control List) index. +AC INI-Param: N/A" + ::= {acSysWEBACLEntry 1} + + + + acSysWEBACLIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Allows IP addresses to connect to the Web interface. Set to +zeroes to allow all IP addresses. +Range: Valid IP address +. +Access: Instant. +AC INI-Param: WEBACCESSLIST" + ::= {acSysWEBACLEntry 2} + + + + acSysWEBAccess OBJECT IDENTIFIER ::= {acSysNetworkConfig 5} + + + -- **************************************** + -- acSysWEBAccess table declaration + -- **************************************** + acSysWEBAccessTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysWEBAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysWEBAccess 1} + + + + -- **************************************** + -- acSysWEBAccess table entry + -- **************************************** + acSysWEBAccessEntry OBJECT-TYPE + SYNTAX AcSysWEBAccessEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysWEBAccessIndex} + ::= {acSysWEBAccessTable 1} + + + + -- **************************************** + -- acSysWEBAccess TABLE + -- **************************************** + AcSysWEBAccessEntry ::= SEQUENCE { + acSysWEBAccessRowStatus Unsigned32, + acSysWEBAccessAction Unsigned32, + acSysWEBAccessActionResult Unsigned32, + acSysWEBAccessIndex INTEGER, + acSysWEBAccessUserName SnmpAdminString, + acSysWEBAccessUserCode SnmpAdminString, + acSysWEBAccessWebAuthMode INTEGER + } + + + + acSysWEBAccessRowStatus OBJECT-TYPE + SYNTAX Unsigned32 (1..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "WEB Basic row-status. +AC INI-Param: WEBAccessRowStatus" + ::= {acSysWEBAccessEntry 1} + + + + acSysWEBAccessAction OBJECT-TYPE + SYNTAX Unsigned32 (0..0) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "WEB Access action. +AC INI-Param: WEBAccessAction" + ::= {acSysWEBAccessEntry 2} + + + + acSysWEBAccessActionResult OBJECT-TYPE + SYNTAX Unsigned32 (0..0) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "WEB Access action result. +AC INI-Param: N/A" + ::= {acSysWEBAccessEntry 3} + + + + acSysWEBAccessIndex OBJECT-TYPE + SYNTAX INTEGER { + administrator(0) +, + monitoringLevel(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "WEB Access index. +AC INI-Param: N/A" + ::= {acSysWEBAccessEntry 4} + + + + acSysWEBAccessUserName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..60)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "WEB Basic user name. Range = String[26]. +Access: Instant. +AC INI-Param: WEBAccessUserName " + ::= {acSysWEBAccessEntry 5} + + + + acSysWEBAccessUserCode OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..60)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "WEB Basic userAccess. +Access: Instant. +AC INI-Param: WEBAccessUserCode " + ::= {acSysWEBAccessEntry 6} + + + + acSysWEBAccessWebAuthMode OBJECT-TYPE + SYNTAX INTEGER { + basicMode(0) +, + digestModeWhenPossible(1) +, + digestModeHTTPOnly(2) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects HTTP basic (clear text) or digest (MD5) authentication +for the web interface. +When set to 0, basic authentication (clear text) will be used. +When set to 1, digest authentication (MD5) will be used. +When set to 2, digest authentication (MD5) will be used for +HTTP, while basic authentication will be used for HTTPS. +Note that turning on RADIUS login forces basic authentication. +Access: Instant. +AC INI-Param: WebAuthMode" + ::= {acSysWEBAccessEntry 7} + + + + acSysNATTraversal OBJECT IDENTIFIER ::= {acSysNetworkConfig 6} + + + acSysTelnet OBJECT IDENTIFIER ::= {acSysNetworkConfig 7} + + + acSysTelnetServerEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) +, + ssl(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the embedded Telnet server. Telnet is disabled +by default for security reasons. +0 = Disable +1= Enable +2 = SSL mode (if available - requires an SSL-aware Telnet client +software) +SSL mode is not available on the MP-108 / MP-124 media gateways. +Access: Instant. +AC INI-Param: TelnetServerEnable" + ::= {acSysTelnet 1} + + + + acSysTelnetServerPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the port number for the embedded Telnet server. +Range = Valid port number. +Access: Online. +AC INI-Param: TELNETSERVERPORT" + ::= {acSysTelnet 2} + + + + acSysTelnetServerIdleDisconnect OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to set the timeout for disconnection +of an idle Telnet session (minutes). When set to zero, idle +sessions are not disconnected. + +Range: Any number. +Access: Offline. +AC INI-Param: TelnetServerIdleDisconnect" + ::= {acSysTelnet 3} + + + + acSysTelnetSSHServerPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the port number for the embedded SSH server. +Range = Valid port number. +Access: Online. +AC INI-Param: SSHServerPort" + ::= {acSysTelnet 4} + + + + acSysTelnetSSHServerEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables the embedded SSH server. +0 = Disable +1= Enable +. +Access: Online. +AC INI-Param: SSHServerEnable" + ::= {acSysTelnet 5} + + + + acSysTelnetSSHAdminKey OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..510)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter holds an RSA public key for strong authentication +to the SSH interface (if enabled). +The value should be a base64-encoded string + see the Security appendix for additional information. +Access: Instant. +AC INI-Param: SSHAdminKey" + ::= {acSysTelnet 6} + + + + acSysTelnetSSHRequirePublicKey OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables RSA public keys in SSH. +When set to 0, RSA public keys are optional (if SSHAdminKey +is set). +When set to 1, RSA public keys are mandatory. +Access: Instant. +AC INI-Param: SSHRequirePublicKey" + ::= {acSysTelnet 7} + + + + acSysTelnetServerWanPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines the WAN Telnet port of the device. +If set to 0, WAN Telnet access will not be possible. +Range = 0 to 65535 (other restrictions may apply in this range). +Access: Offline. +AC INI-Param: WanMgmtTelnetPort" + ::= {acSysTelnet 8} + + + + acSysTelnetWanSSHServerPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Determines the WAN Telnet port of the device. +If set to 0, WAN Telnet access will not be possible. +Range = 0 to 65535 (other restrictions may apply in this range). +Access: Offline. +AC INI-Param: WanMgmtSSHPort" + ::= {acSysTelnet 9} + + + + acSysTelnetSSHMaxSessions OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure maximum allowed number of SSH sessions. +Access: Online. +AC INI-Param: SSHMaxSessions" + ::= {acSysTelnet 10} + + + + acSysTelnetSSHMaxPayloadSize OBJECT-TYPE + SYNTAX Unsigned32 (550..32768) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure maximum uncompressed payload size for SSH packets, +in bytes. +Access: Online. +AC INI-Param: SSHMaxPayloadSize" + ::= {acSysTelnet 11} + + + + acSysTelnetSSHMaxBinaryPacketSize OBJECT-TYPE + SYNTAX Unsigned32 (582..35000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Configure maximum packet size for SSH packets, in bytes. +Access: Online. +AC INI-Param: SSHMaxBinaryPacketSize" + ::= {acSysTelnet 12} + + + + acSysTelnetAllowWanTelnet OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables WAN access to the management interface via +Telnet. +Access: Offline. +AC INI-Param: AllowWanTelnet" + ::= {acSysTelnet 13} + + + + acSysTelnetAllowWanSSH OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables WAN access to the management interface via +SSH. +Access: Offline. +AC INI-Param: AllowWanSSH" + ::= {acSysTelnet 14} + + + + acSysHTTPClient OBJECT IDENTIFIER ::= {acSysNetworkConfig 8} + + + acSysHTTPClientAutoUpdatePredefinedTime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..6)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Schedules an automatic update to a predefined time of the day. +The range is 'HH:MM' (24-hour format). +For example: 20:18 +. +Access: Online. +AC INI-Param: AutoUpdatePredefinedTime" + ::= {acSysHTTPClient 1} + + + + acSysHTTPClientAutoUpdateFrequency OBJECT-TYPE + SYNTAX Unsigned32 (0..65536) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the number of minutes the gateway waits between automatic +updates. + +The default value is 0 (the update at fixed intervals mechanism +is disabled). + +Range: Any number +. +Access: Online. +AC INI-Param: AutoUpdateFrequency" + ::= {acSysHTTPClient 2} + + + + acSysHTTPClientAutoUpdateCmpFile OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables / disables the automatic update mechanism for the cmp +file. + +0 = The automatic update mechanism doesn't apply to the cmp +file (default). +1 = The automatic update mechanism includes the cmp file. +Access: Online. +AC INI-Param: AutoUpdateCmpFile" + ::= {acSysHTTPClient 3} + + + + acSysHTTPClientCmpFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter provides a link to a software image (CMP file) +to be downloaded from a remote server. +. +Access: Offline. +AC INI-Param: CmpFileURL" + ::= {acSysHTTPClient 4} + + + + acSysHTTPClientIniFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter provides a link to an ini file to be downloaded +from a remote server. +. +Access: Offline. +AC INI-Param: IniFileURL" + ::= {acSysHTTPClient 5} + + + + acSysHTTPClientIniFileTemplateURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to an ini file to be downloaded from a remote +server, in addition to IniFileUrl. +Range = http://server_name/file, https://server_name/file. +Access: Offline. +AC INI-Param: IniFileTemplateUrl" + ::= {acSysHTTPClient 6} + + + + acSysHTTPClientCPTFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a Call Progress Tones (CPT) file to be downloaded +from a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Offline. +AC INI-Param: CptFileUrl" + ::= {acSysHTTPClient 7} + + + + acSysHTTPClientVPFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a Voice Prompts file to be downloaded from +a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Online. +AC INI-Param: VpFileUrl" + ::= {acSysHTTPClient 8} + + + + acSysHTTPClientPRTFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a prerecorded tones dat file, to be downloaded +from a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Online. +AC INI-Param: PrtFileUrl" + ::= {acSysHTTPClient 9} + + + + acSysHTTPClientFXSCoeffFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Provides a link to an FXS coefficients file, to be downloaded +from a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Instant. +AC INI-Param: FXSCoeffFileUrl" + ::= {acSysHTTPClient 10} + + + + acSysHTTPClientFXOCoeffFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Provides a link to an FXO coefficients file, to be downloaded +from a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Instant. +AC INI-Param: FXOCoeffFileUrl" + ::= {acSysHTTPClient 11} + + + + acSysHTTPClientCASFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a Channel Associated Signaling (CAS) file +to be downloaded from a remote server. +Range = http://server_name/file, https://server_name/file. +Access: Online. +AC INI-Param: CasFileUrl" + ::= {acSysHTTPClient 12} + + + + acSysHTTPClientXMLFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to an XML segments file, to be downloaded from +a remote server. +See the chapter 'Automatic Update Facility' for supported URL +options. +Access: Online. +AC INI-Param: APSSegmentsFileUrl " + ::= {acSysHTTPClient 13} + + + + acSysHTTPClientCoderTableFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a coder table (CTBL) file that is to be downloaded +from a remote server. +. +Access: Online. +AC INI-Param: CoderTableFileUrl" + ::= {acSysHTTPClient 14} + + + + acSysHTTPClientUserInfoFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to the user information file, to be downloaded +using Automatic Update. +Relevant only for H323 or SIP controlled devices. +Access: Online. +AC INI-Param: UserInfoFileUrl" + ::= {acSysHTTPClient 15} + + + + acSysHTTPClientDialPlanFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URL for downloading a Dial Plan file using the Automatic Update +facility. +Access: Online. +AC INI-Param: DialPlanFileUrl" + ::= {acSysHTTPClient 16} + + + + acSysHTTPClientTLSPkeyFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URL for downloading a TLS private key file using the Automatic +Update facility. +Access: Offline. +AC INI-Param: TLSPkeyFileUrl" + ::= {acSysHTTPClient 17} + + + + acSysHTTPClientTLSCertFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URL for downloading a TLS certificate file using the Automatic +Update facility. +Access: Offline. +AC INI-Param: TLSCertFileUrl" + ::= {acSysHTTPClient 18} + + + + acSysHTTPClientTLSRootFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URL for downloading a TLS trusted root certificate file using +the Automatic Update facility. +Access: Offline. +AC INI-Param: TLSRootFileUrl" + ::= {acSysHTTPClient 19} + + + + acSysHTTPClientWebLogoFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URL for downloading a logo file for the web interface using +the Automatic Update facility. +Access: Online. +AC INI-Param: WebLogoFileUrl" + ::= {acSysHTTPClient 20} + + + + acSysHTTPClientVideoFontFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates the URL for downloading a logo file for the web interface +using the Automatic Update facility. +Access: Online. +AC INI-Param: VideoFontFileUrl" + ::= {acSysHTTPClient 21} + + + + acSysHTTPClientV5PortConfFileURL OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a software (V5PortConfiguration file) to +be downloaded from a remote server. +Access: Online. +AC INI-Param: V5PortConfigurationFileURL" + ::= {acSysHTTPClient 22} + + + + acSysHTTPClientDataConfigurationFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to a data configuration file to be downloaded +from a remote server using the Automatic Update facility. +Access: Offline. +AC INI-Param: RGCONFFILEURL" + ::= {acSysHTTPClient 23} + + + + acSysHTTPClientAmdSensitivityFileUrl OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Provides a link to the AMD Sensitivity file to be downloaded +from a remote server. +Access: Online. +AC INI-Param: AmdSensitivityFileUrl" + ::= {acSysHTTPClient 24} + + + + acSysSNMP OBJECT IDENTIFIER ::= {acSysNetworkConfig 9} + + + acSysSNMPKeepAliveTrapPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65334) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The port to which the keep alive traps are sent to. +Access: Instant. +AC INI-Param: KeepAliveTrapPort" + ::= {acSysSNMP 1} + + + + acSysSNMPEmsColdStrartIndication OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "EMS object to be used as indication to the device's state in +the 'eyes' of the EMS. + Default - 0. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysSNMP 2} + + + + acSysSNMPWanPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "This parameter specifies the WAN port number for SNMP requests +and responses. If set to 0, WAN access to SNMP is disabled. + +Range = 0 to 65535. +Access: Offline. +AC INI-Param: WanMgmtSnmpPort" + ::= {acSysSNMP 3} + + + + acSysSNMPAllowWanSnmp OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables WAN access to the management interface via +SNMP. +Access: Offline. +AC INI-Param: AllowWanSnmp" + ::= {acSysSNMP 4} + + + + acSysVLAN OBJECT IDENTIFIER ::= {acSysNetworkConfig 10} + + + acSysVLANOamVlanId OBJECT-TYPE + SYNTAX Unsigned32 (1..4094) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the OAMP (Operation, Administration, Management and Provisioning) +VLAN identifier. + +Range: 1 to 4094. +Access: Online. +AC INI-Param: VLANOAMVLANID" + ::= {acSysVLAN 1} + + + + acSysVLANControlVlanId OBJECT-TYPE + SYNTAX Unsigned32 (1..4094) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the control VLAN identifier. + +Range: 1 to 4094. +Access: Online. +AC INI-Param: VLANCONTROLVLANID" + ::= {acSysVLAN 2} + + + + acSysVLANMediaVlanId OBJECT-TYPE + SYNTAX Unsigned32 (1..4094) + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the media VLAN identifier. + +Range: 1 to 4094. +Access: Online. +AC INI-Param: VLANMEDIAVLANID" + ::= {acSysVLAN 3} + + + + acSysVLANNetworkServiceClassPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter is used to set the priority for Network service +class content. + +Range = 0 to 7 +Default = 7. +Access: Online. +AC INI-Param: VLANNETWORKSERVICECLASSPRIORITY" + ::= {acSysVLAN 4} + + + + acSysVLANPremiumServiceClassMediaPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets the priority for the Premium service class content and +media traffic. +Range = 0 to 7 +Default = 6. +Access: Online. +AC INI-Param: VLANPREMIUMSERVICECLASSMEDIAPRIORITY" + ::= {acSysVLAN 5} + + + + acSysVLANGoldServiceClassPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets the priority for the Gold service class content. + +Range = 0 to 7 +Default = 4. +Access: Online. +AC INI-Param: VLANGOLDSERVICECLASSPRIORITY" + ::= {acSysVLAN 6} + + + + acSysVLANBronzeServiceClassPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets the priority for the Bronze service class content. + +Range = 0 to 7 +Default = 2. +Access: Online. +AC INI-Param: VLANBRONZESERVICECLASSPRIORITY" + ::= {acSysVLAN 7} + + + + acSysVLANPremiumServiceClassControlPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Sets the priority for the Premium service class content and +control traffic. + +Range = 0 to 7 +Default = 6. +Access: Online. +AC INI-Param: VLANPREMIUMSERVICECLASSCONTROLPRIORITY" + ::= {acSysVLAN 8} + + + + acSysVLANNetworkServiceClassDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to set the DiffServ for Network service +class content. + +Range = 0 to 63 +Default = 48. +Access: Online. +AC INI-Param: NETWORKSERVICECLASSDIFFSERV" + ::= {acSysVLAN 9} + + + + acSysVLANPremiumServiceClassMediaDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to set the DiffServ for Premium service +class content and media traffic. + +Range = 0 to 63. +Access: Online. +AC INI-Param: PREMIUMSERVICECLASSMEDIADIFFSERV" + ::= {acSysVLAN 10} + + + + acSysVLANPremiumServiceClassControlDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the DiffServ for the Premium service class content and +control traffic. + +Range: 0 to 63. +Access: Online. +AC INI-Param: PREMIUMSERVICECLASSCONTROLDIFFSERV" + ::= {acSysVLAN 11} + + + + acSysVLANGoldServiceClassDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the DiffServ for the Gold service class content. + +Range = 0 to 63 +Default = 26. +Access: Online. +AC INI-Param: GOLDSERVICECLASSDIFFSERV" + ::= {acSysVLAN 12} + + + + acSysVLANBronzeServiceClassDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the DiffServ for the Bronze service class content. + +Range = 0 to 63 +Default = 10. +Access: Online. +AC INI-Param: BRONZESERVICECLASSDIFFSERV" + ::= {acSysVLAN 13} + + + + acSysVLANVlanNativeVlanId OBJECT-TYPE + SYNTAX Unsigned32 (1..4094) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the native VLAN identifier. +Access: Online. +AC INI-Param: VLANNATIVEVLANID" + ::= {acSysVLAN 14} + + + + acSysVLANMode OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the VLAN functionality. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: VLANMODE" + ::= {acSysVLAN 15} + + + + -- **************************************** + -- acSysVlanMap table declaration + -- **************************************** + acSysVlanMapTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysVlanMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysVLAN 21} + + + + -- **************************************** + -- acSysVlanMap table entry + -- **************************************** + acSysVlanMapEntry OBJECT-TYPE + SYNTAX AcSysVlanMapEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysVlanMapIndex} + ::= {acSysVlanMapTable 1} + + + + -- **************************************** + -- acSysVlanMap TABLE + -- **************************************** + AcSysVlanMapEntry ::= SEQUENCE { + acSysVlanMapIndex Unsigned32, + acSysVlanMapRowStatus RowStatus, + acSysVlanMapAction INTEGER, + acSysVlanMapActionRes INTEGER, + acSysVlanMapDiffServ Unsigned32, + acSysVlanMapVlanPriority Unsigned32 + } + + + + acSysVlanMapIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: DiffServToVlanPriority_Index" + ::= {acSysVlanMapEntry 1} + + + + acSysVlanMapRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: N/A" + ::= {acSysVlanMapEntry 2} + + + + acSysVlanMapAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: N/A" + ::= {acSysVlanMapEntry 3} + + + + acSysVlanMapActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: N/A" + ::= {acSysVlanMapEntry 4} + + + + acSysVlanMapDiffServ OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). +Access: Online. +AC INI-Param: DiffServToVlanPriority_DiffServ" + ::= {acSysVlanMapEntry 5} + + + + acSysVlanMapVlanPriority OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mapping of DiffServ (DSCP) to Vlan Priorities (IEEE 802.1p). +Access: Online. +AC INI-Param: DiffServToVlanPriority_VlanPriority" + ::= {acSysVlanMapEntry 6} + + + + acSysSCTP OBJECT IDENTIFIER ::= {acSysNetworkConfig 11} + + + acSysSCTPHeartBeatInterval OBJECT-TYPE + SYNTAX Unsigned32 (0..3600) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the SCTP heartbeat interval. + +Range: 1 to 3600. +Access: Offline. +AC INI-Param: SCTPHBInterval" + ::= {acSysSCTP 1} + + + + acSysSCTPT4SACKTimer OBJECT-TYPE + SYNTAX Unsigned32 (1..5) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the SCTP T4 SACK timer interval. + +Range: 1 to 5. +Access: Offline. +AC INI-Param: SCTPT4SAckTimer" + ::= {acSysSCTP 2} + + + + acSysSCTPCheckSumMethod OBJECT-TYPE + SYNTAX INTEGER { + adler(0) +, + crc(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Stream Control Transmission Protocol (SCTP) uses a checksum +mechanism in order to authenticate packets on both sides (the +receiving side and the transmitting side). + +Presently, two checksum mechanisms are available: + +0 = adler32 checksum mechanism +1 = crc32c checksum mechanism (improved mechanism). +Access: Offline. +AC INI-Param: SCTPChecksumMethod" + ::= {acSysSCTP 3} + + + + acSysSCTPHostName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When this parameter is set to any value other than an empty +string, SCTP (Stream Control Transmission Protocol) uses the +value as the value of the FQDN (Fully Qualified Domain Name) +parameter attached to the INIT chunk. In this case, the FQDN +parameter replaces any IP address parameters in the INIT +chunk. + +This feature enables overcoming NAT problems where the original +IP addresses belonging to the endpoint supports are converted +into pseudo addresses. When this parameter is not set +(default), the INIT chunk is sent without any FQDN parameter. + +Range = String[42]. +Access: Offline. +AC INI-Param: SCTPHOSTNAME" + ::= {acSysSCTP 4} + + + + acSysSCTPAssociationsNum OBJECT-TYPE + SYNTAX Unsigned32 (1..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the maximum number of Stream Control Transmission Protocol +(SCTP) associations that can be opened. + +Range: 1 to 8. +Access: Offline. +AC INI-Param: SCTPAssociationsNum" + ::= {acSysSCTP 5} + + + + acSysEthernetPort OBJECT IDENTIFIER ::= {acSysNetworkConfig 12} + + + acSysEthernetPortPhyConfiguration OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex10BaseT(0) +, + fullDuplex10BaseT(1) +, + halfDuplex100BaseT(2) +, + fullDuplex100BaseT(3) +, + autoNegotiate(4) +, + fullDuplex1000BaseT(7) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Controls the Ethernet connection mode type. Auto-negotiate falls +back to Half-Duplex mode (HD) when the opposite port is +not in Auto-negotiate mode. The speed (10 Base-T or 100 Base-TX) +in this mode is always configured correctly. + +0 = 10 Base-T half-duplex +1 = 10 Base-T full-duplex +2 = 100 Base-TX half-duplex +3 = 100 Base-TX full-duplex +4 = Auto-negotiate. +Access: Offline. +AC INI-Param: EthernetPhyConfiguration" + ::= {acSysEthernetPort 1} + + + + acSysPOE OBJECT IDENTIFIER ::= {acSysEthernetPort 21} + + + -- **************************************** + -- acSysPOE table declaration + -- **************************************** + acSysPOETable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysPOEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysPOE 1} + + + + -- **************************************** + -- acSysPOE table entry + -- **************************************** + acSysPOEEntry OBJECT-TYPE + SYNTAX AcSysPOEEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysPOEIndex} + ::= {acSysPOETable 1} + + + + -- **************************************** + -- acSysPOE TABLE + -- **************************************** + AcSysPOEEntry ::= SEQUENCE { + acSysPOEIndex Unsigned32, + acSysPOERowStatus RowStatus, + acSysPOEAction INTEGER, + acSysPOEActionRes INTEGER, + acSysPOEPortEnable INTEGER, + acSysPOEPortPower Unsigned32, + acSysPOEPortATEnable INTEGER + } + + + + acSysPOEIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..11) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "This parameter is used for the Power Over Ethenet (PoE) Index +Field for line. Internal parameter. +AC INI-Param: POETable_Index" + ::= {acSysPOEEntry 1} + + + + acSysPOERowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Power Over Ethenet (PoE) ROWSTATUS field for line. Internal +parameter. +Access: Offline. +AC INI-Param: POETable_RowStatus" + ::= {acSysPOEEntry 2} + + + + acSysPOEAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Power Over Ethenet (PoE) Mangement Field for ACTIONS. Internal +parameter. +Access: Offline. +AC INI-Param: POETable_Action" + ::= {acSysPOEEntry 3} + + + + acSysPOEActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power Over Ethenet (PoE) Mangement Field for ACTIONS RESULT. +Internal parameter. +AC INI-Param: POETable_ActionRes" + ::= {acSysPOEEntry 4} + + + + acSysPOEPortEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This parameter is used for Power Over Ethenet (PoE) - enable/diasble +port PoE. +Access: Offline. +AC INI-Param: POETable_PortEnable" + ::= {acSysPOEEntry 5} + + + + acSysPOEPortPower OBJECT-TYPE + SYNTAX Unsigned32 (4000..30000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This parameter is used for Power Over Ethenet (PoE) - Port Power[mW]. +Access: Offline. +AC INI-Param: POETable_PortPower" + ::= {acSysPOEEntry 6} + + + + acSysPOEPortATEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This parameter is used to show if working in mode IEEE 802.3AF +(0) or IEEE 802.3AT (1). +Access: Offline. +AC INI-Param: POETable_PortATEnable" + ::= {acSysPOEEntry 7} + + + + acSysNetworkSettings OBJECT IDENTIFIER ::= {acSysNetworkConfig 13} + + + acSysNetworkSettingsDisableICMPRedirects OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Disable ICMP Redirect messages. When set to 0 ICMP Redirect +messages are not ignored. +Access: Instant. +AC INI-Param: DisableICMPRedirects" + ::= {acSysNetworkSettings 1} + + + + acSysSTUN OBJECT IDENTIFIER ::= {acSysNATTraversal 21} + + + acSysSTUNEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to enable the STUN module, used for NAT +traversal of UDP packets. +Access: Offline. +AC INI-Param: ENABLESTUN" + ::= {acSysSTUN 1} + + + + acSysSTUNPrimaryServerIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the primary STUN Server IP address. +Range = Legal IP address. +Access: Offline. +AC INI-Param: STUNSERVERPRIMARYIP" + ::= {acSysSTUN 2} + + + + acSysSTUNSecondaryServerIP OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the secondary STUN server IP address. +Range = Legal IP address. +Access: Offline. +AC INI-Param: STUNSERVERSECONDARYIP" + ::= {acSysSTUN 3} + + + + acSysSTUNBindingLifeTime OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter is used to define the NAT binding lifetime, in +seconds. STUN refreshes the binding information after this +time expires. +Range = 0 - 2592000. +Access: Offline. +AC INI-Param: NATBINDINGDEFAULTTIMEOUT" + ::= {acSysSTUN 4} + + + + acSysMiscConfig OBJECT IDENTIFIER ::= {acSystemConfiguration 4} + + + acSysDiagnostics OBJECT IDENTIFIER ::= {acSysMiscConfig 1} + + + acSysDiagnosticsEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + builtInTest(1) +, + builtInTestwithPartialFlash(2) +, + builtInTestWithSDRAM(3) +, + builtInTestOnUtopiaVxb(4) +, + internalUse(99) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Checks the correct functionality of the different hardware components +on the board. On completion of the check, the board +sends an EV_END_BIT value, which contains information on the +test results of each hardware component. + +0 = No diagnostics (default) +1 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, +PHY and Flash) +2 = Perform diagnostics (full test of DSPs, PCM, Switch, LAN, +PHY, but partial, test of Flash, a quicker mode). +Access: Offline. +AC INI-Param: ENABLEDIAGNOSTICS" + ::= {acSysDiagnostics 1} + + + + acSysDiagnosticsEnablePerformanceThresholdAlarms OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter enables sending SNMP traps and Syslog messages +when performance of the device is degraded (according to the +configured thresholds). +Access: Instant. +AC INI-Param: PM_EnableThresholdAlarms" + ::= {acSysDiagnostics 2} + + + + acSysDiagnosticsListOfActivitiesToLog OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines what activities are to be reported by +the device in the form of a log message. Parameter format is + x,y,z-... where x,y,z are activity codes to be reported by +the device. +Supported activity codes: +PVC - Parameter Value Changes. +AFL - Auxiliary Files Loading. +DR - Device Reset. +FB - Flash Burning. +SWU - SoftWareUpdate. +ARD - Access to Restricted Domains. +NAA - Non Authorized Access. +SPC - Sensitive Parameters Changes. +Access: Online. +AC INI-Param: ActivityListToLog" + ::= {acSysDiagnostics 3} + + + + acSysGenericINI OBJECT IDENTIFIER ::= {acSysMiscConfig 2} + + + acSysGenericINILine OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..512)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Flexible INI file line. +to enter more than one line, use '$@$' between lines. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysGenericINI 1} + + + + acSysGenericINISecureStartup OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables secure startup mode. In this mode, downloading +of the INI file is restricted to a URL provided in prior +configuration (see parameter IniFileURL) or via DHCP. +Access: Offline. +AC INI-Param: EnableSecureStartup" + ::= {acSysGenericINI 2} + + + + acSysGenericCli OBJECT IDENTIFIER ::= {acSysMiscConfig 3} + + + acSysGenericCliCommand OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..512)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "send CLI command. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysGenericCli 1} + + + + acSysGenericCliCommandResponse OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..512)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "get CLI command response. +AC INI-Param: N/A" + ::= {acSysGenericCli 2} + + + + acSysLicenseKey OBJECT IDENTIFIER ::= {acSystemConfiguration 5} + + + acSysLicenseKeyString OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..256)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Coded Key specific for board and required features. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysLicenseKey 1} + + + + acSysLicenseKeyActiveList OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..484)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "List of all avtivated features. +AC INI-Param: N/A" + ::= {acSysLicenseKey 2} + + + + acSysFile OBJECT IDENTIFIER ::= {acSystemConfiguration 6} + + + acSysFileCpt OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines Call Progress Tone filenames (downloaded by TFTP). +AC INI-Param: CALLPROGRESSTONESFILENAME" + ::= {acSysFile 1} + + + + acSysFileVp OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the name (and path) of the file containing the Voice +Prompts. + +Range = String of ASCII characters. +AC INI-Param: VOICEPROMPTSFILENAME" + ::= {acSysFile 2} + + + + acSysFilePrerecordedTones OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the name (and path) of the file containing the Prerecorded +Tones. +Range = String of ASCII characters. +AC INI-Param: PrerecordedTonesFileName" + ::= {acSysFile 3} + + + + acSysFileXml OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This parameter is used to indicate the name of the file containing +the XML file. +AC INI-Param: XMLFileName" + ::= {acSysFile 4} + + + + acSysFileExternalCoder OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This parameter defines the name of an external coders table. +In this table, the user can decide which coders will be used +in the system. The original file is a text file, and it is +converted by DCONVERT to a bynary file. +AC INI-Param: CODERTBLFILENAME" + ::= {acSysFile 5} + + + + acSysFileUserInfo OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The file name to be loaded. +AC INI-Param: N/A" + ::= {acSysFile 6} + + + + acSysFileDialPlanFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This parameter is used to indicate the name of the file containing +the Dial Plan. +AC INI-Param: gDialPlanFileName" + ::= {acSysFile 7} + + + + acSysFileTLSPkeyFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This parameter defines the name of a private key file (internal). +Set to blank to regenerate the key and certificate. +AC INI-Param: HTTPSPkeyFileName" + ::= {acSysFile 8} + + + + acSysFileTLSCertFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the name of the HTTPS server certificate file to be +downloaded via TFTP. The file must be in base64-encoded PEM +format. +Range = String[47]. +AC INI-Param: HTTPSCertFileName" + ::= {acSysFile 9} + + + + acSysFileTLSRootFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines the name of the HTTPS trusted root certificate file +to be downloaded via TFTP. The file must be in base64-encoded +PEM format. +Range = String[47]. +AC INI-Param: HTTPSRootFileName" + ::= {acSysFile 10} + + + + acSysFileFirstVideoFontFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the name of the first file containing the Video Font +file index. +AC INI-Param: VideoFontFIleName" + ::= {acSysFile 11} + + + + acSysFileSecondVideoFontFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the name of the second file containing the Video Font +file index. +AC INI-Param: VideoFontFIleName" + ::= {acSysFile 12} + + + + acSysFileThirdVideoFontFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the name of the first file containing the Video Font +file index. +AC INI-Param: VideoFontFIleName" + ::= {acSysFile 13} + + + + acSysFileV5PortConfFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the name and location of the V5 Port Configuration +file. +AC INI-Param: V5PortConfigurationFileName" + ::= {acSysFile 14} + + + + acSysFileAmdSensitivityFileName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..47)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Name of the AMD Sensitivity auxiliary file. +AC INI-Param: AmdSensitivityFileName" + ::= {acSysFile 15} + + + + acSysSecurity OBJECT IDENTIFIER ::= {acSystemConfiguration 7} + + + acSysSecurityTLSVersion OBJECT-TYPE + SYNTAX INTEGER { + sSL-2-3-and-TLS-1(0) +, + tLS-1-only(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the supported versions of SSL/TLS. +When set to 0, SSL/TLS handshakes always start with SSL 2.0 +and switch to TLS 1.0 if both peers support it. +When set to 1, TLS 1.0 is the only version supported + clients attempting to contact the device using SSL 2.0 will +be rejected. + +Possible values: +0 = SSL 2.0, SSL 3.0, and TLS 1.0 are supported (default) +1 = TLS 1.0 will always be used. +Access: Online. +AC INI-Param: TLSVersion" + ::= {acSysSecurity 1} + + + + acSysSecurityOcspEnable OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + enabled(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables certificate checking via OCSP. +Access: Instant. +AC INI-Param: OcspEnable" + ::= {acSysSecurity 2} + + + + acSysSecurityOcspServerIPType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the OCSP server's IP address Type. +0 - unknown +1 - IPv4 +2 - IPv6. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysSecurity 3} + + + + acSysSecurityOcspServerIP OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the OCSP server's IP address. +Range = Legal IP address. +Access: Instant. +AC INI-Param: OcspServerIP" + ::= {acSysSecurity 4} + + + + acSysSecurityOcspServerPort OBJECT-TYPE + SYNTAX Unsigned32 (1..32767) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the OCSP server's TCP port number. +Range = 1 to 32767. +Access: Instant. +AC INI-Param: OcspServerPort" + ::= {acSysSecurity 5} + + + + acSysSecurityOcspDefaultResponse OBJECT-TYPE + SYNTAX INTEGER { + rejectPeerCertificate(0) +, + allowPeerCertificate(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines default OCSP behavior when the server cannot be contacted. +0 = reject peer certificate. +1 = allow peer certificate. +. +Access: Instant. +AC INI-Param: OcspDefaultResponse" + ::= {acSysSecurity 6} + + + + acSysSecurityTLSFIPS140Mode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + enabled(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines whether to enable the FIPS140 mode for TLS. +Access: Offline. +AC INI-Param: TLS_Fips140_Mode" + ::= {acSysSecurity 7} + + + + acSysSecurityGenCsrSubjectName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..600)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "generate CSR Subject Name. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysSecurity 8} + + + + acSysSecuritySelfSignedCertificateSubjectName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + " +Access: Instant. +AC INI-Param: N/A" + ::= {acSysSecurity 9} + + + + acSysSecurityOcspSecondaryServerIPType OBJECT-TYPE + SYNTAX InetAddressType + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the OCSP secondary server's IP address +Type. +0 - unknown +1 - IPv4 +2 - IPv6. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysSecurity 10} + + + + acSysSecurityOcspSecondaryServerIP OBJECT-TYPE + SYNTAX InetAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter defines the OCSP secondary server IP address. +Range = Legal IP address. +Access: Instant. +AC INI-Param: OcspSecondaryServerIP" + ::= {acSysSecurity 11} + + + + acSysSecurityHTTPSRequireClientCertificate OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Requires client certificates for HTTPS connection. +The client certificate must be preloaded on the gateway, and +its matching private key must be installed on the managing +computer. +Time and date must be correctly set on the gateway, for the +client certificate to be verified. +Access: Online. +AC INI-Param: HTTPSRequireClientCertificate" + ::= {acSysSecurity 12} + + + + acSysSecurityAUPDVerifyCertificates OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This parameter configures the AutoUpdate facility to verify +server certificates when using HTTPS. +Access: Online. +AC INI-Param: AUPDVerifyCertificates" + ::= {acSysSecurity 13} + + + + acSysSecurityRequireStrictCertification OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Verify the certification strictly - for SSL. +Access: Online. +AC INI-Param: RequireStrictCert" + ::= {acSysSecurity 14} + + + + acSysSecurityTLSExpiryCheckStart OBJECT-TYPE + SYNTAX Unsigned32 (0..3650) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The system will report when the TLS server certificate is about +to expire within this number of days. +Access: Instant. +AC INI-Param: TLSExpiryCheckStart" + ::= {acSysSecurity 15} + + + + acSysSecurityTLSExpiryCheckPeriod OBJECT-TYPE + SYNTAX Unsigned32 (1..3650) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines how often the system will check for TLS server certificate +expiry (in days). +Access: Instant. +AC INI-Param: TLSExpiryCheckPeriod" + ::= {acSysSecurity 16} + + + + acSysIKE OBJECT IDENTIFIER ::= {acSysSecurity 21} + + + -- **************************************** + -- acSysIKEPolicy table declaration + -- **************************************** + acSysIKEPolicyTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysIKEPolicyEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "" + ::= {acSysIKE 1} + + + + -- **************************************** + -- acSysIKEPolicy table entry + -- **************************************** + acSysIKEPolicyEntry OBJECT-TYPE + SYNTAX AcSysIKEPolicyEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "" + INDEX {acSysIKEPolicyIndex} + ::= {acSysIKEPolicyTable 1} + + + + -- **************************************** + -- acSysIKEPolicy TABLE + -- **************************************** + AcSysIKEPolicyEntry ::= SEQUENCE { + acSysIKEPolicyIndex Unsigned32, + acSysIKEPolicyRowStatus RowStatus, + acSysIKEPolicyAction INTEGER, + acSysIKEPolicyActionRes INTEGER, + acSysIKEPolicyShardKey SnmpAdminString, + acSysIKEPolicyLifeInSeconds Unsigned32, + acSysIKEPolicyLifeInKB Unsigned32, + acSysIKEPolicyProposal0Encryption INTEGER, + acSysIKEPolicyProposal1Encryption INTEGER, + acSysIKEPolicyProposal2Encryption INTEGER, + acSysIKEPolicyProposal3Encryption INTEGER, + acSysIKEPolicyProposal0Authentication INTEGER, + acSysIKEPolicyProposal1Authentication INTEGER, + acSysIKEPolicyProposal2Authentication INTEGER, + acSysIKEPolicyProposal3Authentication INTEGER, + acSysIKEPolicyProposal0DHGroup INTEGER, + acSysIKEPolicyProposal1DHGroup INTEGER, + acSysIKEPolicyProposal2DHGroup INTEGER, + acSysIKEPolicyProposal3DHGroup INTEGER, + acSysIKEPolicyAuthenticationMethod INTEGER + } + + + + acSysIKEPolicyIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..19) + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "This parameter is used for the Internet Key Encryption (IKE) +Index Field for line. Internal parameter. +AC INI-Param: IKE_DB_INDEX" + ::= {acSysIKEPolicyEntry 1} + + + + acSysIKEPolicyRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for the Internet Key Encryption (IKE) +ROWSTATUS Field for line. Internal parameter. +AC INI-Param: IKE_DB_ROWSTATUS" + ::= {acSysIKEPolicyEntry 2} + + + + acSysIKEPolicyAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for the Internet Key Encryption (IKE) +Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: IKE_DB_ACTION" + ::= {acSysIKEPolicyEntry 3} + + + + acSysIKEPolicyActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "This parameter is used for the Internet Key Encryption (IKE) +Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: IKE_DB_ACTION_RESULT" + ::= {acSysIKEPolicyEntry 4} + + + + acSysIKEPolicyShardKey OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..80)) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Shared Key. +Access: Instant. +AC INI-Param: IKEPOLICYSHAREDKEY" + ::= {acSysIKEPolicyEntry 5} + + + + acSysIKEPolicyLifeInSeconds OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - IKE SA LifeTime in seconds. +Access: Instant. +AC INI-Param: IKEPOLICYLIFEINSEC" + ::= {acSysIKEPolicyEntry 6} + + + + acSysIKEPolicyLifeInKB OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - IKE SA LifeTime in KB. +Access: Instant. +AC INI-Param: IKEPOLICYLIFEINKB" + ::= {acSysIKEPolicyEntry 7} + + + + acSysIKEPolicyProposal0Encryption OBJECT-TYPE + SYNTAX INTEGER { + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 0 encryption type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_0" + ::= {acSysIKEPolicyEntry 8} + + + + acSysIKEPolicyProposal1Encryption OBJECT-TYPE + SYNTAX INTEGER { + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 1 encryption type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_1" + ::= {acSysIKEPolicyEntry 9} + + + + acSysIKEPolicyProposal2Encryption OBJECT-TYPE + SYNTAX INTEGER { + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 2 encryption type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_2" + ::= {acSysIKEPolicyEntry 10} + + + + acSysIKEPolicyProposal3Encryption OBJECT-TYPE + SYNTAX INTEGER { + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 3 encryption type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALENCRYPTION_3" + ::= {acSysIKEPolicyEntry 11} + + + + acSysIKEPolicyProposal0Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 0 authentication type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_0" + ::= {acSysIKEPolicyEntry 12} + + + + acSysIKEPolicyProposal1Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 1 authentication type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_1" + ::= {acSysIKEPolicyEntry 13} + + + + acSysIKEPolicyProposal2Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 2 authentication type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_2" + ::= {acSysIKEPolicyEntry 14} + + + + acSysIKEPolicyProposal3Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 3 authentication type. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALAUTHENTICATION_3" + ::= {acSysIKEPolicyEntry 15} + + + + acSysIKEPolicyProposal0DHGroup OBJECT-TYPE + SYNTAX INTEGER { + dH-786-BIT(0) +, + dH-1024-BIT(1) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 0 Diffie Hellman Group. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALDHGROUP_0" + ::= {acSysIKEPolicyEntry 16} + + + + acSysIKEPolicyProposal1DHGroup OBJECT-TYPE + SYNTAX INTEGER { + dH-786-BIT(0) +, + dH-1024-BIT(1) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 1 Diffie Hellman Group. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALDHGROUP_1" + ::= {acSysIKEPolicyEntry 17} + + + + acSysIKEPolicyProposal2DHGroup OBJECT-TYPE + SYNTAX INTEGER { + dH-786-BIT(0) +, + dH-1024-BIT(1) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 2 Diffie Hellman Group. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALDHGROUP_2" + ::= {acSysIKEPolicyEntry 18} + + + + acSysIKEPolicyProposal3DHGroup OBJECT-TYPE + SYNTAX INTEGER { + dH-786-BIT(0) +, + dH-1024-BIT(1) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IKE Policy - Proposal 3 Diffie Hellman Group. +Access: Instant. +AC INI-Param: IKEPOLICYPROPOSALDHGROUP_3" + ::= {acSysIKEPolicyEntry 19} + + + + acSysIKEPolicyAuthenticationMethod OBJECT-TYPE + SYNTAX INTEGER { + presharedKey(0) +, + rsaSignature(1) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Internet Key Encryption (IKE) Policy +- IKE Authentication Method (Preshared key/ RSA). +Access: Offline. +AC INI-Param: IKEPOLICYAUTHENTICATIONMETHOD" + ::= {acSysIKEPolicyEntry 20} + + + + acSysIPSec OBJECT IDENTIFIER ::= {acSysSecurity 22} + + + acSysIPSecEnable OBJECT-TYPE + SYNTAX INTEGER { + no(0) +, + yes(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IPsec Enable flag. +Access: Offline. +AC INI-Param: ENABLEIPSEC" + ::= {acSysIPSec 1} + + + + acSysIPSecDpdMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + periodic(1) +, + ondemand(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "IPsec Dead Peer Detection (RFC 3706) - Mode of Operation. +One of the following values: '0' - Disabled (Default) + '1' - Periodic + '2' - On demand. +Access: Instant. +AC INI-Param: IPSECDPDMODE" + ::= {acSysIPSec 2} + + + + acSysIPSecIKECertificateExtValidate OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + enabled(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables or disables certificate extension checking for IKE. +Access: Instant. +AC INI-Param: IKEcertificateExtValidate" + ::= {acSysIPSec 3} + + + + -- **************************************** + -- acSysIPSecSPD table declaration + -- **************************************** + acSysIPSecSPDTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysIPSecSPDEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "" + ::= {acSysIPSec 21} + + + + -- **************************************** + -- acSysIPSecSPD table entry + -- **************************************** + acSysIPSecSPDEntry OBJECT-TYPE + SYNTAX AcSysIPSecSPDEntry + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "" + INDEX {acSysIPSecSPDIndex} + ::= {acSysIPSecSPDTable 1} + + + + -- **************************************** + -- acSysIPSecSPD TABLE + -- **************************************** + AcSysIPSecSPDEntry ::= SEQUENCE { + acSysIPSecSPDIndex Unsigned32, + acSysIPSecSPDRowStatus RowStatus, + acSysIPSecSPDAction INTEGER, + acSysIPSecSPDActionRes INTEGER, + acSysIPSecSPDPolicyRemoteIPAddr SnmpAdminString, + acSysIPSecSPDPolicySrcPort Unsigned32, + acSysIPSecSPDPolicyDestPort Unsigned32, + acSysIPSecSPDPolicyProtocol Unsigned32, + acSysIPSecSPDKeyExchangeMethodIndex Unsigned32, + acSysIPSecSPDLifeInSeconds Unsigned32, + acSysIPSecSPDLifeInKB Unsigned32, + acSysIPSecSPDProposal0Encryption INTEGER, + acSysIPSecSPDProposal1Encryption INTEGER, + acSysIPSecSPDProposal2Encryption INTEGER, + acSysIPSecSPDProposal3Encryption INTEGER, + acSysIPSecSPDProposal0Authentication INTEGER, + acSysIPSecSPDProposal1Authentication INTEGER, + acSysIPSecSPDProposal2Authentication INTEGER, + acSysIPSecSPDProposal3Authentication INTEGER, + acSysIPSecSPDPolicyLocalIPAddrType INTEGER, + acSysIPSecSPDMode INTEGER, + acSysIPSecSPDPolicyRemoteTunnelIPAddress IpAddress, + acSysIPSecSPDPolicyLocalTunnelIPAddress IpAddress, + acSysIPSecSPDPolicyRemoteTunnelSubnetMask IpAddress + } + + + + acSysIPSecSPDIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..19) + MAX-ACCESS not-accessible + STATUS obsolete + DESCRIPTION + "Security Policy Database (SPD) Index Field for line. Internal +parameter. +AC INI-Param: SPD_INDEX" + ::= {acSysIPSecSPDEntry 1} + + + + acSysIPSecSPDRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Security Policy Database (SPD) ROWSTATUS field for line. Internal +parameter. +AC INI-Param: SPD_ROWSTATUS" + ::= {acSysIPSecSPDEntry 2} + + + + acSysIPSecSPDAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "Security Policy Database (SPD) Mangement Field for ACTIONS. +Internal parameter. +AC INI-Param: SPD_ACTION" + ::= {acSysIPSecSPDEntry 3} + + + + acSysIPSecSPDActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS obsolete + DESCRIPTION + "Security Policy Database (SPD) Mangement Field for ACTIONS RESULT. +Internal parameter. +AC INI-Param: SPD_ACTION_RESULT" + ::= {acSysIPSecSPDEntry 4} + + + + acSysIPSecSPDPolicyRemoteIPAddr OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..99)) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy Policy - Remote IP address as IP or Host Name. +Access: Instant. +AC INI-Param: IPSECPOLICYREMOTEIPADDRESS" + ::= {acSysIPSecSPDEntry 5} + + + + acSysIPSecSPDPolicySrcPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65536) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy Policy - Source Port. +Access: Instant. +AC INI-Param: IPSECPOLICYSRCPORT" + ::= {acSysIPSecSPDEntry 6} + + + + acSysIPSecSPDPolicyDestPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65536) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy Policy - Destination Port. +Access: Instant. +AC INI-Param: IPSECPOLICYDSTPORT" + ::= {acSysIPSecSPDEntry 7} + + + + acSysIPSecSPDPolicyProtocol OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy Policy - Protocol. +Access: Instant. +AC INI-Param: IPSECPOLICYPROTOCOL" + ::= {acSysIPSecSPDEntry 8} + + + + acSysIPSecSPDKeyExchangeMethodIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for the Secure Internet Protocol (IPsec) +Policy - Index into the Key Exchange Method Table (IKE Table). +Access: Offline. +AC INI-Param: IPSECPOLICYKEYEXCHANGEMETHODINDEX" + ::= {acSysIPSecSPDEntry 9} + + + + acSysIPSecSPDLifeInSeconds OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - IPSec SA LifeTime in seconds. +Access: Instant. +AC INI-Param: IPSECPOLICYLIFEINSEC" + ::= {acSysIPSecSPDEntry 10} + + + + acSysIPSecSPDLifeInKB OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - IPSec SA LifeTime in KB. +Access: Instant. +AC INI-Param: IPSECPOLICYLIFEINKB" + ::= {acSysIPSecSPDEntry 11} + + + + acSysIPSecSPDProposal0Encryption OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 0 encryption type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_0" + ::= {acSysIPSecSPDEntry 12} + + + + acSysIPSecSPDProposal1Encryption OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 1 encryption type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_1" + ::= {acSysIPSecSPDEntry 13} + + + + acSysIPSecSPDProposal2Encryption OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 2 encryption type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_2" + ::= {acSysIPSecSPDEntry 14} + + + + acSysIPSecSPDProposal3Encryption OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + dES-CBC(1) +, + triple-DES-CBC(2) +, + aES(3) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 3 encryption type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALENCRYPTION_3" + ::= {acSysIPSecSPDEntry 15} + + + + acSysIPSecSPDProposal0Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 0 authentication type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_0" + ::= {acSysIPSecSPDEntry 16} + + + + acSysIPSecSPDProposal1Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 0 authentication type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_1" + ::= {acSysIPSecSPDEntry 17} + + + + acSysIPSecSPDProposal2Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 0 authentication type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_2" + ::= {acSysIPSecSPDEntry 18} + + + + acSysIPSecSPDProposal3Authentication OBJECT-TYPE + SYNTAX INTEGER { + hMAC-SHA-1-96(2) +, + hMAC-MD5-96(4) +, + not-set(10) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "IPsec Policy - Proposal 0 authentication type. +Access: Instant. +AC INI-Param: IPSECPOLICYPROPOSALAUTHENTICATION_3" + ::= {acSysIPSecSPDEntry 19} + + + + acSysIPSecSPDPolicyLocalIPAddrType OBJECT-TYPE + SYNTAX INTEGER { + oam(0) +, + control(2) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy - Local IP address type (OAM/Control). +Access: Offline. +AC INI-Param: IPSECPOLICYLOCALIPADDRESSTYPE" + ::= {acSysIPSecSPDEntry 20} + + + + acSysIPSecSPDMode OBJECT-TYPE + SYNTAX INTEGER { + transport(0) +, + tunneling(1) + + } + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy - Mode of Operation (Transport/Tunneling). '0' - Transport + '1' - Tunneling. +Access: Instant. +AC INI-Param: IPSECMODE" + ::= {acSysIPSecSPDEntry 21} + + + + acSysIPSecSPDPolicyRemoteTunnelIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy - IP Address of the Remote IPSec Tunnel Endpoint. +Access: Instant. +AC INI-Param: IPSECPOLICYREMOTETUNNELIPADDRESS" + ::= {acSysIPSecSPDEntry 22} + + + + acSysIPSecSPDPolicyLocalTunnelIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy - IP Address of the Remote IPSec Tunnel Endpoint. +Access: Instant. +AC INI-Param: IPSECPOLICYLOCALTUNNELIPADDRESS" + ::= {acSysIPSecSPDEntry 23} + + + + acSysIPSecSPDPolicyRemoteTunnelSubnetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS obsolete + DESCRIPTION + "This parameter is used for Secure Internet Protocol (IPsec) +Policy - Subnet Mask of the Remote IPSec Address. +Access: Instant. +AC INI-Param: IPSECPOLICYREMOTESUBNETMASK" + ::= {acSysIPSecSPDEntry 24} + + + + -- **************************************** + -- acSysIPsecProposal table declaration + -- **************************************** + acSysIPsecProposalTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysIPsecProposalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPsec Proposal table" + ::= {acSysIPSec 22} + + + + -- **************************************** + -- acSysIPsecProposal table entry + -- **************************************** + acSysIPsecProposalEntry OBJECT-TYPE + SYNTAX AcSysIPsecProposalEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysIPsecProposalIndex} + ::= {acSysIPsecProposalTable 1} + + + + -- **************************************** + -- acSysIPsecProposal TABLE + -- **************************************** + AcSysIPsecProposalEntry ::= SEQUENCE { + acSysIPsecProposalIndex Unsigned32, + acSysIPsecProposalRowStatus RowStatus, + acSysIPsecProposalAction INTEGER, + acSysIPsecProposalActionRes INTEGER, + acSysIPsecProposalEncryptionAlgorithm INTEGER, + acSysIPsecProposalAuthenticationAlgorithm INTEGER, + acSysIPsecProposalDiffieHellmanGroup INTEGER + } + + + + acSysIPsecProposalIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..4) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. +AC INI-Param: IPsecProposalTable_Index" + ::= {acSysIPsecProposalEntry 1} + + + + acSysIPsecProposalRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS Field for line. +AC INI-Param: IPsecProposalTable_RowStatus" + ::= {acSysIPsecProposalEntry 2} + + + + acSysIPsecProposalAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. +AC INI-Param: IPsecProposalTable_Action" + ::= {acSysIPsecProposalEntry 3} + + + + acSysIPsecProposalActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. +AC INI-Param: IPsecProposalTable_ActionRes" + ::= {acSysIPsecProposalEntry 4} + + + + acSysIPsecProposalEncryptionAlgorithm OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + desCbc(1) +, + tripleDesCbc(2) +, + aes(3) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects the encryption (privacy) algorithm to use. +Access: Online. +AC INI-Param: IPsecProposalTable_EncryptionAlgorithm" + ::= {acSysIPsecProposalEntry 5} + + + + acSysIPsecProposalAuthenticationAlgorithm OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + hmacSha1-96(2) +, + hmacMd5-96(4) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects the message authentication (integrity) algorithm to +use. +Access: Online. +AC INI-Param: IPsecProposalTable_AuthenticationAlgorithm" + ::= {acSysIPsecProposalEntry 6} + + + + acSysIPsecProposalDiffieHellmanGroup OBJECT-TYPE + SYNTAX INTEGER { + group1-768Bits(0) +, + group2-1024Bits(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects the Diffie-Hellman group to use. +Access: Online. +AC INI-Param: IPsecProposalTable_DHGroup" + ::= {acSysIPsecProposalEntry 7} + + + + -- **************************************** + -- acSysIPsecSA table declaration + -- **************************************** + acSysIPsecSATable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysIPsecSAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "IPsec SA table" + ::= {acSysIPSec 23} + + + + -- **************************************** + -- acSysIPsecSA table entry + -- **************************************** + acSysIPsecSAEntry OBJECT-TYPE + SYNTAX AcSysIPsecSAEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysIPsecSAIndex} + ::= {acSysIPsecSATable 1} + + + + -- **************************************** + -- acSysIPsecSA TABLE + -- **************************************** + AcSysIPsecSAEntry ::= SEQUENCE { + acSysIPsecSAIndex Unsigned32, + acSysIPsecSARowStatus RowStatus, + acSysIPsecSAAction Unsigned32, + acSysIPsecSAActionRes Unsigned32, + acSysIPsecSARemoteEndpointAddress SnmpAdminString, + acSysIPsecSAAuthenticationMethod INTEGER, + acSysIPsecSASharedKey SnmpAdminString, + acSysIPsecSASourcePort Unsigned32, + acSysIPsecSADestPort Unsigned32, + acSysIPsecSAProtocol Unsigned32, + acSysIPsecSAPhase1SaLifetimeInSec Unsigned32, + acSysIPsecSAPhase2SaLifetimeInSec Unsigned32, + acSysIPsecSAPhase2SaLifetimeInKB Unsigned32, + acSysIPsecSADPDmode INTEGER, + acSysIPsecSAIPsecMode INTEGER, + acSysIPsecSARemoteTunnelAddress SnmpAdminString, + acSysIPsecSARemoteSubnetIPAddress SnmpAdminString, + acSysIPsecSARemoteSubnetPrefixLength Unsigned32, + acSysIPsecSAInterfaceName RowPointer + } + + + + acSysIPsecSAIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..20) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. +AC INI-Param: IPsecSATable_Index" + ::= {acSysIPsecSAEntry 1} + + + + acSysIPsecSARowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS Field for line. +AC INI-Param: IPsecSATable_RowStatus" + ::= {acSysIPsecSAEntry 2} + + + + acSysIPsecSAAction OBJECT-TYPE + SYNTAX Unsigned32 (0..0) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. +AC INI-Param: IPsecSATable_Action" + ::= {acSysIPsecSAEntry 3} + + + + acSysIPsecSAActionRes OBJECT-TYPE + SYNTAX Unsigned32 (0..0) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. +AC INI-Param: IPsecSATable_ActionRes" + ::= {acSysIPsecSAEntry 4} + + + + acSysIPsecSARemoteEndpointAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..98)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP address or DNS host name of the peer. +Access: Online. +AC INI-Param: IPsecSATable_RemoteEndpointAddressOrName" + ::= {acSysIPsecSAEntry 5} + + + + acSysIPsecSAAuthenticationMethod OBJECT-TYPE + SYNTAX INTEGER { + presharedKey(0) +, + rSASignature(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects the method used for peer authentication during IKE main +mode. +Access: Online. +AC INI-Param: IPsecSATable_AuthenticationMethod" + ::= {acSysIPsecSAEntry 6} + + + + acSysIPsecSASharedKey OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..79)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the pre-shared key (in textual format). +Access: Online. +AC INI-Param: IPsecSATable_SharedKey" + ::= {acSysIPsecSAEntry 7} + + + + acSysIPsecSASourcePort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the source port to which this configuration applies. +Access: Online. +AC INI-Param: IPsecSATable_SourcePort" + ::= {acSysIPsecSAEntry 8} + + + + acSysIPsecSADestPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the destination port to which this configuration applies. +Access: Online. +AC INI-Param: IPsecSATable_DestPort" + ::= {acSysIPsecSAEntry 9} + + + + acSysIPsecSAProtocol OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Defines the protocol type to which this configuration applies. +Standard IP protocol numbers should be used, e.g.: +0 = Any protocol (default) +17 = UDP +6 = TCP +. +Access: Online. +AC INI-Param: IPsecSATable_Protocol" + ::= {acSysIPsecSAEntry 10} + + + + acSysIPsecSAPhase1SaLifetimeInSec OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Determines the duration (in seconds) for which the negotiated +IKE SA (main mode) is valid. After the time expires, the SA +is re-negotiated. +Access: Online. +AC INI-Param: IPsecSATable_Phase1SaLifetimeInSec" + ::= {acSysIPsecSAEntry 11} + + + + acSysIPsecSAPhase2SaLifetimeInSec OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Determines the duration (in seconds) for which the negotiated +IPSec SA (quick mode) is valid. After the time expires, the +SA is re-negotiated. +Access: Online. +AC INI-Param: IPsecSATable_Phase2SaLifetimeInSec" + ::= {acSysIPsecSAEntry 12} + + + + acSysIPsecSAPhase2SaLifetimeInKB OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Determines the maximum volume of traffic (in kilobytes) for +which the negotiated IPSec SA (quick mode) is valid. +Access: Online. +AC INI-Param: IPsecSATable_Phase2SaLifetimeInKB" + ::= {acSysIPsecSAEntry 13} + + + + acSysIPsecSADPDmode OBJECT-TYPE + SYNTAX INTEGER { + dPDDisabled(0) +, + dPDPeriodic(1) +, + dPDOnDemand(2) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Controls dead peer detection (DPD) as per RFC 3706. +Access: Online. +AC INI-Param: IPsecSATable_DPDmode" + ::= {acSysIPsecSAEntry 14} + + + + acSysIPsecSAIPsecMode OBJECT-TYPE + SYNTAX INTEGER { + transport(0) +, + tunnel(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Selects the IPSec mode of operation. +0 = Transport mode (default) +1 = Tunnel mode +. +Access: Online. +AC INI-Param: IPsecSATable_IPsecMode" + ::= {acSysIPsecSAEntry 15} + + + + acSysIPsecSARemoteTunnelAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP address of the peer router. +Access: Online. +AC INI-Param: IPsecSATable_RemoteTunnelAddress" + ::= {acSysIPsecSAEntry 16} + + + + acSysIPsecSARemoteSubnetIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP address of the remote subnetwork. +Access: Online. +AC INI-Param: IPsecSATable_RemoteSubnetIPAddress" + ::= {acSysIPsecSAEntry 17} + + + + acSysIPsecSARemoteSubnetPrefixLength OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Prefix length of the Remote Subnet IP Address parameter (in +bits). +Access: Online. +AC INI-Param: IPsecSATable_RemoteSubnetPrefixLength" + ::= {acSysIPsecSAEntry 18} + + + + acSysIPsecSAInterfaceName OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Select the OID of the interface name corresponding to the one +appearing in the interface table. +The OID should be 1.3.6.1.4.1.5003.9.10.10.1.3.1.30.22.1.11. +acSysInterfaceIndex +Note: when ignore a default value will be SET: 0.0. +Access: Online. +AC INI-Param: IPsecSATable_InterfaceName" + ::= {acSysIPsecSAEntry 19} + + + + acFirewall OBJECT IDENTIFIER ::= {acSysSecurity 23} + + + -- **************************************** + -- acSysAccessList table declaration + -- **************************************** + acSysAccessListTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acFirewall 1} + + + + -- **************************************** + -- acSysAccessList table entry + -- **************************************** + acSysAccessListEntry OBJECT-TYPE + SYNTAX AcSysAccessListEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysAccessListIndex} + ::= {acSysAccessListTable 1} + + + + -- **************************************** + -- acSysAccessList TABLE + -- **************************************** + AcSysAccessListEntry ::= SEQUENCE { + acSysAccessListIndex Unsigned32, + acSysAccessListRowStatus RowStatus, + acSysAccessListAction INTEGER, + acSysAccessListActionRes INTEGER, + acSysAccessListSourceIP SnmpAdminString, + acSysAccessListNetMask IpAddress, + acSysAccessListStartPort Unsigned32, + acSysAccessListEndPort Unsigned32, + acSysAccessListProtocol SnmpAdminString, + acSysAccessListPacketSize Unsigned32, + acSysAccessListByteRate Unsigned32, + acSysAccessListByteBurst Unsigned32, + acSysAccessListAllowType INTEGER, + acSysAccessListMatchCount Unsigned32, + acSysAccessListInterfaceName SnmpAdminString, + acSysAccessListUseSpecificInterface INTEGER, + acSysAccessListSourcePort Unsigned32, + acSysAccessListPrefixLength Unsigned32 + } + + + + acSysAccessListIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..49) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: ACCESSLIST_Index" + ::= {acSysAccessListEntry 1} + + + + acSysAccessListRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: N/A" + ::= {acSysAccessListEntry 2} + + + + acSysAccessListAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: N/A" + ::= {acSysAccessListEntry 3} + + + + acSysAccessListActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: N/A" + ::= {acSysAccessListEntry 4} + + + + acSysAccessListSourceIP OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..60)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source IP for access rule. +Access: Online. +AC INI-Param: ACCESSLIST_Source_IP" + ::= {acSysAccessListEntry 5} + + + + acSysAccessListNetMask OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-create + STATUS deprecated + DESCRIPTION + "Mask for this access rule (bitwise ANDed with the source IP +of the packet). +Access: Online. +AC INI-Param: ACCESSLIST_Net_Mask" + ::= {acSysAccessListEntry 6} + + + + acSysAccessListStartPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port range - start. +Access: Online. +AC INI-Param: ACCESSLIST_Start_Port" + ::= {acSysAccessListEntry 7} + + + + acSysAccessListEndPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Port range - end. +Access: Online. +AC INI-Param: ACCESSLIST_End_Port" + ::= {acSysAccessListEntry 8} + + + + acSysAccessListProtocol OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..10)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "IP user-level protocol (TCP, UDP, ICMP, ESP, SIP, MGCP, TPNCP, +ANY or numeric value). +Access: Online. +AC INI-Param: ACCESSLIST_Protocol" + ::= {acSysAccessListEntry 9} + + + + acSysAccessListPacketSize OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum packet size (0 = unused). +Access: Online. +AC INI-Param: ACCESSLIST_Packet_Size" + ::= {acSysAccessListEntry 10} + + + + acSysAccessListByteRate OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Allowed traffic in bytes per second (0 = unused). +Access: Online. +AC INI-Param: ACCESSLIST_Byte_Rate" + ::= {acSysAccessListEntry 11} + + + + acSysAccessListByteBurst OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Allowed traffic burst in bytes (0 = unused). +Access: Online. +AC INI-Param: ACCESSLIST_Byte_Burst" + ::= {acSysAccessListEntry 12} + + + + acSysAccessListAllowType OBJECT-TYPE + SYNTAX INTEGER { + notSet(0) +, + allow(1) +, + block(2) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Allow or block traffic matching this rule. +Access: Online. +AC INI-Param: ACCESSLIST_Allow_Type" + ::= {acSysAccessListEntry 13} + + + + acSysAccessListMatchCount OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Statistics: number of matched packets. +AC INI-Param: ACCESSLIST_MatchCount" + ::= {acSysAccessListEntry 14} + + + + acSysAccessListInterfaceName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..15)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of the specific interface the rule applies to. None - default +value when no interface was chosen. +Access: Online. +AC INI-Param: ACCESSLIST_Interface_ID" + ::= {acSysAccessListEntry 15} + + + + acSysAccessListUseSpecificInterface OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Rule for specific interface or for the entire interfaces. +Access: Online. +AC INI-Param: ACCESSLIST_Use_Specific_Interface" + ::= {acSysAccessListEntry 16} + + + + acSysAccessListSourcePort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Source Port. +Access: Online. +AC INI-Param: ACCESSLIST_Source_Port" + ::= {acSysAccessListEntry 17} + + + + acSysAccessListPrefixLength OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Prefix length of source IP address (defining a subnet). +Access: Online. +AC INI-Param: ACCESSLIST_PrefixLen" + ::= {acSysAccessListEntry 18} + + + + acSysMediaEncription OBJECT IDENTIFIER ::= {acSysSecurity 24} + + + acSysMediaEncriptionRTPAuthenticationDisableTx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Authentication +on transmitted RTP packets. + +One of the following values: + +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTPAuthenticationDisableTx" + ::= {acSysMediaEncription 1} + + + + acSysMediaEncriptionRTPAuthenticationDisableRx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Authentication +on received RTP packets +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTPAuthenticationDisableRx" + ::= {acSysMediaEncription 2} + + + + acSysMediaEncriptionRTPEncryptionDisableTx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Encryption +on transmitted RTP packets. One of the following values: + +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTPEncryptionDisableTx" + ::= {acSysMediaEncription 3} + + + + acSysMediaEncriptionRTPEncryptionDisableRx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Encryption +on transmitted RTP packets. One of the following values: + +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTPEncryptionDisableRx" + ::= {acSysMediaEncription 4} + + + + acSysMediaEncriptionRTCPEncryptionDisableTx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Encryption +on transmitted RTCP packets. One of the following values: + +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTCPEncryptionDisableTx" + ::= {acSysMediaEncription 5} + + + + acSysMediaEncriptionRTCPEncryptionDisableRx OBJECT-TYPE + SYNTAX INTEGER { + inactive(0) +, + active(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "On a secured RTP session, determines whether to enable Encryption +on received RTCP packets. + +One of the following values: + +0 = Enable +1 = Disable. +Access: Online. +AC INI-Param: RTCPEncryptionDisableRx" + ::= {acSysMediaEncription 6} + + + + acSys802dot1x OBJECT IDENTIFIER ::= {acSysSecurity 25} + + + acSys802dot1xMode OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + eapMd5(1) +, + protectedEap(2) +, + eapTls(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables support for IEEE 802.1x physical port security. +0 = Disabled +1 = EAP-MD5 +2 = Protected EAP (PEAP) +3 = EAP-TLS +. +Access: Instant. +AC INI-Param: 802.1xMode" + ::= {acSys802dot1x 1} + + + + acSys802dot1xUsername OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Username for IEEE 802.1x support. +Access: Instant. +AC INI-Param: 802.1xUsername" + ::= {acSys802dot1x 2} + + + + acSys802dot1xPassword OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..31)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Password for IEEE 802.1x support. +Access: Instant. +AC INI-Param: 802.1xPassword" + ::= {acSys802dot1x 3} + + + + acSys802dot1xVerifyPeerCertificate OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Verify Peer Certificate for IEEE 802.1x support. +Access: Instant. +AC INI-Param: 802.1xVerifyPeerCertificate" + ::= {acSys802dot1x 4} + + + + acSysSRTP OBJECT IDENTIFIER ::= {acSysMediaEncription 21} + + + acSysSRTPPacketMKISize OBJECT-TYPE + SYNTAX Unsigned32 (0..4) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the size of the parameter Master Key Identifier (MKI) +in SRTP Tx packets. + +One of the following values: + +0 = MKI Disabled +1 - 4 = size (bytes of MKI). +Access: Online. +AC INI-Param: SRTPTxPacketMKISize" + ::= {acSysSRTP 1} + + + + acSysSerialIF OBJECT IDENTIFIER ::= {acSystemConfiguration 8} + + + acSysSerialIFBaudRate OBJECT-TYPE + SYNTAX INTEGER { + r1200(1200) +, + r2400(2400) +, + r4800(4800) +, + r9600(9600) +, + r14400(14400) +, + r19200(19200) +, + r38400(38400) +, + r57600(57600) +, + r115200(115200) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables changes to the Serial Baud Rate for Simplified Message +Desk Interface (SMDI). + +Standard values: 1200, 2400, 9600, 14400, 19200, 38400, 57600, +115200. +Access: Offline. +AC INI-Param: SerialBaudRate" + ::= {acSysSerialIF 1} + + + + acSysSerialIFData OBJECT-TYPE + SYNTAX Unsigned32 (7..8) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Changes the serial data bit for the Simplified Message Desk +Interface (SMDI). + +7 = 7 Bit +8 = 8 Bit. +Access: Offline. +AC INI-Param: SerialData" + ::= {acSysSerialIF 2} + + + + acSysSerialIFParity OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + odd(1) +, + even(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Changes the serial parity for the Simplified Message Desk Interface +(SMDI). + +0 = None +1 = Odd +2 = Even. +Access: Offline. +AC INI-Param: SerialParity" + ::= {acSysSerialIF 3} + + + + acSysSerialIFStop OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Changes the serial stop for the Simplified Message Desk Interface +(SMDI). + +1 = 1 Bit +2 = 2 Bit. +Access: Offline. +AC INI-Param: SerialStop" + ::= {acSysSerialIF 4} + + + + acSysSerialIFFlowControl OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + hardware(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Changes the serial flow control for the Simplified Message Desk +Interface (SMDI). + +0 = None +1 = Hardware. +Access: Offline. +AC INI-Param: SerialFlowControl" + ::= {acSysSerialIF 5} + + + + acVoiceStream OBJECT IDENTIFIER ::= {acSystemConfiguration 9} + + + acVoiceStreamStatus OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + enabled(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/disables the voice streaming for all voice source types +(HTTP, NFS, Local Storage). When enabled, the module requires +some system resources, such as tasks and memory allocation. + +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: N/A" + ::= {acVoiceStream 1} + + + + acVoiceStreamUploadMethod OBJECT-TYPE + SYNTAX INTEGER { + httpPostMethod(0) +, + httpPutMethod(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the HTTP request type for uploading the voice stream +to the file server. + +0 = POST +1 = PUT. +Access: Offline. +AC INI-Param: N/A" + ::= {acVoiceStream 2} + + + + acVoiceStreamUploadPostUri OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..59)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the URI used on the POST request, to upload voice data +from the media server to a web server. +This parameter is used only when using the HTTP POST for recording +and the command is not issued by the Lib (tpncp protocol). +The path needs to be set to the upload script on the web server. + +. +Access: Offline. +AC INI-Param: N/A" + ::= {acVoiceStream 3} + + + + acSysAMS OBJECT IDENTIFIER ::= {acSystemConfiguration 10} + + + acSysAMSProfile OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable/Disable AMS Advanced IVR play functionality. +0 = Disable +1 = Enable. +Access: Offline. +AC INI-Param: AMSProfile" + ::= {acSysAMS 1} + + + + acSysAMSApsIpAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the destination UDP port to which the Heartbeat Packets +are sent. +Range = IP address in dotted notation +xxx.xxx.xxx.xxx +Default = 0.0.0.0. +Access: Offline. +AC INI-Param: HeartbeatDestIP" + ::= {acSysAMS 2} + + + + acSysAMSApsPort OBJECT-TYPE + SYNTAX Unsigned32 (0..64000) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the destination UDP port to which the heartbeat packets +are sent. +Access: Offline. +AC INI-Param: HeartbeatDestPort" + ::= {acSysAMS 3} + + + + acSysAMSPrimaryLanguage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Primary Language for the AMS. +Range = String[3] - language ISO string. +Access: Instant. +AC INI-Param: AMSPrimaryLanguage" + ::= {acSysAMS 4} + + + + acSysAMSSecondaryLanguage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..3)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Secondary Language for the AMS. +Range = String[3] - language ISO string. +Access: Instant. +AC INI-Param: AMSSecondaryLanguage" + ::= {acSysAMS 5} + + + + acSysAMSAPSProfile OBJECT-TYPE + SYNTAX INTEGER { + vpDatProvidedAudio(0) +, + apsProvidedAudio(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates if the system should expect to use APS bundle (vp.dat +and segments.xml files), or if the system should expect +the vp.dat file only. A 1 means that an APS bundle should be +used. A 0 means that the system should use vp.dat only. The +default setting is 1, meaning expect APS bundle. +Access: Offline. +AC INI-Param: APSEnabled" + ::= {acSysAMS 6} + + + + acSysAMSForceRepositoryEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Indicates that a new audio repository (consisting of VP and +XML files) should always be uploaded to the board regardless +of whether signals are still being played on the old repository. +Access: Instant. +AC INI-Param: AMSForceRepositoryUpdateEnabled" + ::= {acSysAMS 7} + + + + acSysNetworkFileSystem OBJECT IDENTIFIER ::= {acSystemConfiguration 11} + + + -- **************************************** + -- acSysNFS table declaration + -- **************************************** + acSysNFSTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysNFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysNetworkFileSystem 21} + + + + -- **************************************** + -- acSysNFS table entry + -- **************************************** + acSysNFSEntry OBJECT-TYPE + SYNTAX AcSysNFSEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysNFSIndex} + ::= {acSysNFSTable 1} + + + + -- **************************************** + -- acSysNFS TABLE + -- **************************************** + AcSysNFSEntry ::= SEQUENCE { + acSysNFSIndex Unsigned32, + acSysNFSRowStatus RowStatus, + acSysNFSAction INTEGER, + acSysNFSActionRes INTEGER, + acSysNFSHostOrIP SnmpAdminString, + acSysNFSRootPath SnmpAdminString, + acSysNFSNfsVersion INTEGER, + acSysNFSAuthType INTEGER, + acSysNFSUID Unsigned32, + acSysNFSGID Unsigned32, + acSysNFSVlanType INTEGER + } + + + + acSysNFSIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. Index can be up to +15 in dependency of board type. +AC INI-Param: NFSServers_Index" + ::= {acSysNFSEntry 1} + + + + acSysNFSRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: N/A" + ::= {acSysNFSEntry 2} + + + + acSysNFSAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: N/A" + ::= {acSysNFSEntry 3} + + + + acSysNFSActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: N/A" + ::= {acSysNFSEntry 4} + + + + acSysNFSHostOrIP OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..39)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The domain name or IP address of the NFS server. If a domain +name is provided, then a DNS server must be configured. +Access: Online. +AC INI-Param: NFSServers_HostOrIP" + ::= {acSysNFSEntry 5} + + + + acSysNFSRootPath OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..99)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Path to the root of the exported file system. +Access: Online. +AC INI-Param: NFSServers_RootPath" + ::= {acSysNFSEntry 6} + + + + acSysNFSNfsVersion OBJECT-TYPE + SYNTAX INTEGER { + v2(2) +, + v3(3) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "NFS version to use with this remote file system, 2 or 3 (default). +Access: Online. +AC INI-Param: NFSServers_NfsVersion" + ::= {acSysNFSEntry 7} + + + + acSysNFSAuthType OBJECT-TYPE + SYNTAX INTEGER { + null(0) +, + unix(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Identifies the authentication method used with this remote file +system, 0 for AUTH_NULL, 1 for AUTH_UNIX (default). +Access: Online. +AC INI-Param: NFSServers_AuthType" + ::= {acSysNFSEntry 8} + + + + acSysNFSUID OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "User ID used in authentication if using AUTH_UNIX. The default +is 0. +Access: Online. +AC INI-Param: NFSServers_UID" + ::= {acSysNFSEntry 9} + + + + acSysNFSGID OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Group ID used in authentication if using AUTH_UNIX. The default +is 1. +Access: Online. +AC INI-Param: NFSServers_GID" + ::= {acSysNFSEntry 10} + + + + acSysNFSVlanType OBJECT-TYPE + SYNTAX INTEGER { + oam(0) +, + media(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "The VLAN, OAM(0) or Media(1), to use when accessing this remote +file system. The default is to use +the media VLAN. This parameters applies only if multiple IP +addresses are configured on this board. +Access: Online. +AC INI-Param: NFSServers_VlanType" + ::= {acSysNFSEntry 11} + + + + acSysHA OBJECT IDENTIFIER ::= {acSystemConfiguration 12} + + + acSysHAGlobalIPAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Defines the M3K global IP address to be used by the active module +in HA system. (Dotted format notation. e.g., 192.10.1.255). +Range = Legal IP address. +Access: Offline. +AC INI-Param: M3KGlobalIpAddr" + ::= {acSysHA 1} + + + + acSysHARemoteAddress OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the Maintenance IF IP address of the remote HA unit. +Relevant to M4K and SW-SBC. +Access: Offline. +AC INI-Param: HARemoteAddress" + ::= {acSysHA 2} + + + + acSysHARevertive OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "When enabled, unit with higher HA priority will take the active +state in HA system. +Relevant to M4K and SW-SBC. +Access: Offline. +AC INI-Param: HARevertiveEnabled" + ::= {acSysHA 3} + + + + acSysHAPriority OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the user to define the HA priority to decide if unit +should be in Active or Redundant state (Valid only when acSysHARevertive +is set) +Relevant to M4K and SW-SBC. +Access: Offline. +AC INI-Param: HAPriority" + ::= {acSysHA 4} + + + + acSysHARedundantPriority OBJECT-TYPE + SYNTAX Unsigned32 (1..10) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables the user to define the Redundant HA priority to decide +if unit should be in Active or Redundant state. Valid range +is 1-10. +Relevant to M4K and SW-SBC. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysHA 5} + + + + acSysHAPingEnabled OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enabling network monitor using ping to test reachability from +defined source interface, a drop in reachability will trigger +switch over to redundant unit. +Access: Online. +AC INI-Param: HAPingEnabled" + ::= {acSysHA 6} + + + + acSysHAPingDestination OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ping destination IP address of HA network monitor +reachability module. +Access: Online. +AC INI-Param: HAPingDestination" + ::= {acSysHA 7} + + + + acSysHAPingSourceIfName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ping source inteface to test for HA network monitor +reachability module. +Access: Online. +AC INI-Param: HAPingSourceIfName" + ::= {acSysHA 8} + + + + acSysHAPingTimeout OBJECT-TYPE + SYNTAX Unsigned32 (1..60) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ping time out value in seconds for HA network monitor +reachability module. +Access: Online. +AC INI-Param: HAPingTimeout" + ::= {acSysHA 9} + + + + acSysHAPingRetries OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the ping retries value for HA network monitor reachability +module. +Access: Online. +AC INI-Param: HAPingRetries" + ::= {acSysHA 10} + + + + acSysTransmission OBJECT IDENTIFIER ::= {acSystemConfiguration 13} + + + acSysTransmissionType OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + opticalSonetSdh(1) +, + copperDs3(2) +, + copperE1Ds1(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Sets the PSTN Transmission type for the board: optical SONET +/ SDH or copper DS3. +Access: Offline. +AC INI-Param: PSTNTransmissionType" + ::= {acSysTransmission 1} + + + + acSysTiming OBJECT IDENTIFIER ::= {acSystemConfiguration 14} + + + acSysTimingMode OBJECT-TYPE + SYNTAX INTEGER { + standAlone(0) +, + external(1) +, + lineSync(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the PSTN Timing synchonization mode of the Gateway. +One of the following values: TM_External_MODE(1) +-External Timing mode - use the SAT trunks Centralized Line +Timing to synchronize the Gateway with one of the PSTN interfaces. +TM_LineSync_MODE(2) +-Distributed Line Timing mode (for the 1610 boards)- without +using the SAT timing module. TM_Standalone_MODE(0) +-Non-synchronized mode - each board or TPM is synchronized +internally from one of the PSTN interfaces without using the +SAT timing module. +Access: Online. +AC INI-Param: TMMode" + ::= {acSysTiming 1} + + + + acSysTimingValidationTime OBJECT-TYPE + SYNTAX Unsigned32 (0..15) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Reference validation time. Applicable for External timing and +Line timing timing references. Range: 0 - 15 minutes. Resolution: +1 minute. +Access: Online. +AC INI-Param: TMReferenceValidationTime" + ::= {acSysTiming 2} + + + + acSysTimingClockToDeriveA OBJECT-TYPE + SYNTAX INTEGER { + deriveREFFromLineClock1(0) +, + deriveInternalClock(4) +, + clockFromReceiveSide(7) + + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Which Clock to use in sync mode. +Access: Online. +AC INI-Param: TMClockToDerive_A" + ::= {acSysTiming 3} + + + + acSysTimingClockToDeriveB OBJECT-TYPE + SYNTAX INTEGER { + deriveREFFromLineClock1(0) +, + deriveInternalClock(4) +, + clockFromReceiveSide(7) + + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Which Clock to use in sync mode. +Access: Online. +AC INI-Param: TMClockToDerive_B" + ::= {acSysTiming 4} + + + + acSysTimingExternalIFType OBJECT-TYPE + SYNTAX INTEGER { + e1CRC4(0) +, + e1CAS(1) +, + e1FAS(2) +, + t1D4(3) +, + t1ESF(4) +, + t12(5) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the external line reference (BITS) transmission format. +Access: Online. +AC INI-Param: TMExternalIFType" + ::= {acSysTiming 5} + + + + acSysTimingLoopBackRef1 OBJECT-TYPE + SYNTAX INTEGER { + loopDisable(0) +, + loopEnable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables loopback state, by connecting Rx path towards Tx path. +Access: Online. +AC INI-Param: TMLoopBackExternalRef1" + ::= {acSysTiming 6} + + + + acSysTimingLoopBackRef2 OBJECT-TYPE + SYNTAX INTEGER { + loopDisable(0) +, + loopEnable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables loopback state, by connecting Rx path towards Tx path. +Access: Online. +AC INI-Param: TMLoopBackExternalRef2" + ::= {acSysTiming 7} + + + + acSysTimingTransmitControl OBJECT-TYPE + SYNTAX INTEGER { + systemClock(0) +, + aIS(1) +, + disableTransmit(2) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Enables loopback state, by connecting Rx path towards Tx path. +Access: Online. +AC INI-Param: TMTransmitControl" + ::= {acSysTiming 8} + + + + acSysTimingE1LineBuildOut OBJECT-TYPE + SYNTAX INTEGER { + tm75OhmNormal(0) +, + tm120OhmNormal(1) +, + tm75OhmHighReturnLoss(4) +, + tm120OhmHighReturnLoss(5) +, + tm75OhmNormalGappedClock(6) +, + tm120OhmNormalGappedClock(7) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "Sets the transmission power between the timing module on the +SAT and the E1 external reference clock (ohms). This parameter +is only relevant for the Mediant 3000.This parameter is +enabled when bspTimingModuleCfgTimingMode is set to TM_External_MODE(1). + +One of the following values: E_75_OHM_with_high_return_loss(4),E_120_OHM_with_high_return_loss(5),E_75_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(6),E_120_OHM_normal_PLUS_enable_transmit_and_receive_gapped_clock(7),E_75_OHM_normal(0),E_120_OHM_normal(1). +Access: Online. +AC INI-Param: TME1LineBuildOut " + ::= {acSysTiming 9} + + + + acSysTimingT1LineBuildOut OBJECT-TYPE + SYNTAX INTEGER { + dSX10to133feet0dBCSU(0) +, + dSX1133to266feet(1) +, + dSX1266to399feet(2) +, + dSX1399to533feet(3) +, + dSX1533to655feet(4) +, + dSX10to133ft0dBgappedclock(7) + + } + MAX-ACCESS read-write + STATUS obsolete + DESCRIPTION + "External Reference Transmit Line Build Out. +Access: Online. +AC INI-Param: TMT1LineBuildOut" + ::= {acSysTiming 10} + + + + acSysLDAP OBJECT IDENTIFIER ::= {acSystemConfiguration 15} + + + acSysLDAPServerIp OBJECT-TYPE + SYNTAX IpAddress + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter defines the IP address in dotted format notation. +e.g., 192.10.1.255 +Range = Legal IP address. +Access: Online. +AC INI-Param: LDAPSERVERIP" + ::= {acSysLDAP 1} + + + + acSysLDAPServerPort OBJECT-TYPE + SYNTAX Unsigned32 (0..65535) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Defines the port number for the LDAP server. +Range = Valid port number. +Access: Online. +AC INI-Param: LDAPSERVERPORT" + ::= {acSysLDAP 2} + + + + acSysLDAPServerMaxRespondTime OBJECT-TYPE + SYNTAX Unsigned32 (0..86400) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "Defines the period of time the module will wait for LDAP server +response (seconds). +Access: Instant. +AC INI-Param: LDAPSERVERMAXRESPONDTIME" + ::= {acSysLDAP 3} + + + + acSysLDAPServerDomainName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter is used to indicate the name of LDAP server. +Access: Online. +AC INI-Param: LDAPSERVERDOMAINNAME" + ::= {acSysLDAP 4} + + + + acSysLDAPSearchDN OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter is used to indicate the search DN for LDAP search +request. +Access: Online. +AC INI-Param: LDAPSEARCHDN" + ::= {acSysLDAP 5} + + + + acSysLDAPPassword OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter is used to indicate the user password of LDAP +server. +Access: Online. +AC INI-Param: LDAPPASSWORD" + ::= {acSysLDAP 6} + + + + acSysLDAPBindDN OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..255)) + MAX-ACCESS read-write + STATUS deprecated + DESCRIPTION + "This parameter is used to indicate the of LDAP server bind DN. +Access: Online. +AC INI-Param: LDAPBINDDN" + ::= {acSysLDAP 7} + + + + acSysLDAPServiceEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Used to either enable or disable LDAP service. + +0- disable (default) +1 - enable. +Access: Offline. +AC INI-Param: LDAPSERVICEENABLE" + ::= {acSysLDAP 8} + + + + acSysLDAPCacheEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enables/Disable using the cashe in LDAP. + +0- disable (default) +1 - enable. +Access: Offline. +AC INI-Param: LDAPCACHEENABLE" + ::= {acSysLDAP 9} + + + + acSysLDAPCacheEntryTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time (in seconds) that an entry in the LDAP cache is valid. +Access: Online. +AC INI-Param: LDAPCACHEENTRYTIMEOUT" + ::= {acSysLDAP 10} + + + + acSysLDAPCacheEntryRemovalTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The time (in seconds) that an entry in the LDAP cache is removed +from cache. +Access: Online. +AC INI-Param: LDAPCACHEENTRYREMOVALTIMEOUT" + ::= {acSysLDAP 11} + + + + asSysNqm OBJECT IDENTIFIER ::= {acSystemConfiguration 16} + + + -- **************************************** + -- acSysNqmSender table declaration + -- **************************************** + acSysNqmSenderTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysNqmSenderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {asSysNqm 21} + + + + -- **************************************** + -- acSysNqmSender table entry + -- **************************************** + acSysNqmSenderEntry OBJECT-TYPE + SYNTAX AcSysNqmSenderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysNqmSenderIndex} + ::= {acSysNqmSenderTable 1} + + + + -- **************************************** + -- acSysNqmSender TABLE + -- **************************************** + AcSysNqmSenderEntry ::= SEQUENCE { + acSysNqmSenderIndex Unsigned32, + acSysNqmSenderRowStatus RowStatus, + acSysNqmSenderAction INTEGER, + acSysNqmSenderActionRes INTEGER, + acSysNqmSenderSenderName SnmpAdminString, + acSysNqmSenderActive INTEGER, + acSysNqmSenderTargetIpAddress SnmpAdminString, + acSysNqmSenderTargetPort Unsigned32, + acSysNqmSenderPacketInterval Unsigned32, + acSysNqmSenderPayloadSize Unsigned32, + acSysNqmSenderIpTos Unsigned32, + acSysNqmSenderTimeout Unsigned32, + acSysNqmSenderRttThreshold Unsigned32, + acSysNqmSenderJitterThreshold Unsigned32, + acSysNqmSenderPacketLossThershold Unsigned32, + acSysNqmSenderProbingConfigName RowPointer, + acSysNqmSenderSourceInterfaceName RowPointer + } + + + + acSysNqmSenderIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: NqmSenderTable_Index" + ::= {acSysNqmSenderEntry 1} + + + + acSysNqmSenderRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: NqmSenderTable_RowStatus" + ::= {acSysNqmSenderEntry 2} + + + + acSysNqmSenderAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: NqmSenderTable_Action" + ::= {acSysNqmSenderEntry 3} + + + + acSysNqmSenderActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: NqmSenderTable_ActionRes" + ::= {acSysNqmSenderEntry 4} + + + + acSysNqmSenderSenderName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Sender descriptive name. +Access: Online. +AC INI-Param: NqmSenderTable_SenderName" + ::= {acSysNqmSenderEntry 5} + + + + acSysNqmSenderActive OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Sender enable. +Access: Online. +AC INI-Param: NqmSenderTable_Active" + ::= {acSysNqmSenderEntry 6} + + + + acSysNqmSenderTargetIpAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Target IP address. +Access: Online. +AC INI-Param: NqmSenderTable_TargetIpAddress" + ::= {acSysNqmSenderEntry 7} + + + + acSysNqmSenderTargetPort OBJECT-TYPE + SYNTAX Unsigned32 (3900..3990) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Target transport layer port number. +Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970, +3980, 3990. +Access: Online. +AC INI-Param: NqmSenderTable_TargetPort" + ::= {acSysNqmSenderEntry 8} + + + + acSysNqmSenderPacketInterval OBJECT-TYPE + SYNTAX Unsigned32 (5..1000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Interval between each packet transmitting [msec]. +Access: Online. +AC INI-Param: NqmSenderTable_PacketInterval" + ::= {acSysNqmSenderEntry 9} + + + + acSysNqmSenderPayloadSize OBJECT-TYPE + SYNTAX Unsigned32 (28..1420) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Size of IP payload [bytes]. +Access: Online. +AC INI-Param: NqmSenderTable_PayloadSize" + ::= {acSysNqmSenderEntry 10} + + + + acSysNqmSenderIpTos OBJECT-TYPE + SYNTAX Unsigned32 (0..255) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "TOS value in the IP header. +Access: Online. +AC INI-Param: NqmSenderTable_IpTos" + ::= {acSysNqmSenderEntry 11} + + + + acSysNqmSenderTimeout OBJECT-TYPE + SYNTAX Unsigned32 (0..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Receive timeout on expected packet. +Access: Online. +AC INI-Param: NqmSenderTable_Timeout" + ::= {acSysNqmSenderEntry 12} + + + + acSysNqmSenderRttThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum allowable Round Trip Time [msec], if exceeded some action +is needed. +Access: Online. +AC INI-Param: NqmSenderTable_RttThreshold" + ::= {acSysNqmSenderEntry 13} + + + + acSysNqmSenderJitterThreshold OBJECT-TYPE + SYNTAX Unsigned32 (0..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum allowable Jitter [msec], if exceeded some action is +needed. +Access: Online. +AC INI-Param: NqmSenderTable_JitterThreshold" + ::= {acSysNqmSenderEntry 14} + + + + acSysNqmSenderPacketLossThershold OBJECT-TYPE + SYNTAX Unsigned32 (0..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Maximum allowable Packet Loss, if exceeded some action is needed. +Access: Online. +AC INI-Param: NqmSenderTable_PacketLossThershold" + ::= {acSysNqmSenderEntry 15} + + + + acSysNqmSenderProbingConfigName OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of corresponding probe in probing table. +Access: Online. +AC INI-Param: NqmSenderTable_ProbingConfigName" + ::= {acSysNqmSenderEntry 16} + + + + acSysNqmSenderSourceInterfaceName OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of source interface. +Access: Online. +AC INI-Param: NqmSenderTable_SourceInterfaceName" + ::= {acSysNqmSenderEntry 17} + + + + -- **************************************** + -- acSysNqmProbing table declaration + -- **************************************** + acSysNqmProbingTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysNqmProbingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {asSysNqm 22} + + + + -- **************************************** + -- acSysNqmProbing table entry + -- **************************************** + acSysNqmProbingEntry OBJECT-TYPE + SYNTAX AcSysNqmProbingEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysNqmProbingIndex} + ::= {acSysNqmProbingTable 1} + + + + -- **************************************** + -- acSysNqmProbing TABLE + -- **************************************** + AcSysNqmProbingEntry ::= SEQUENCE { + acSysNqmProbingIndex Unsigned32, + acSysNqmProbingRowStatus RowStatus, + acSysNqmProbingAction INTEGER, + acSysNqmProbingActionRes INTEGER, + acSysNqmProbingProbeName SnmpAdminString, + acSysNqmProbingDuration Unsigned32, + acSysNqmProbingFrequency Unsigned32, + acSysNqmProbingLifeSpan Unsigned32, + acSysNqmProbingStartTime SnmpAdminString, + acSysNqmProbingHistoryEntriesToKeep Unsigned32 + } + + + + acSysNqmProbingIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: NqmProbingTable_Index" + ::= {acSysNqmProbingEntry 1} + + + + acSysNqmProbingRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: NqmProbingTable_RowStatus" + ::= {acSysNqmProbingEntry 2} + + + + acSysNqmProbingAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: NqmProbingTable_Action" + ::= {acSysNqmProbingEntry 3} + + + + acSysNqmProbingActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: NqmProbingTable_ActionRes" + ::= {acSysNqmProbingEntry 4} + + + + acSysNqmProbingProbeName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Probe descriptive name. +Access: Online. +AC INI-Param: NqmProbingTable_ProbeName" + ::= {acSysNqmProbingEntry 5} + + + + acSysNqmProbingDuration OBJECT-TYPE + SYNTAX Unsigned32 (20..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Duration of probing session [sec]. +Access: Online. +AC INI-Param: NqmProbingTable_Duration" + ::= {acSysNqmProbingEntry 6} + + + + acSysNqmProbingFrequency OBJECT-TYPE + SYNTAX Unsigned32 (0..32000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Time interval between the start of two consecutive probing sessions + [sec]. +Access: Online. +AC INI-Param: NqmProbingTable_Frequency" + ::= {acSysNqmProbingEntry 7} + + + + acSysNqmProbingLifeSpan OBJECT-TYPE + SYNTAX Unsigned32 (0..2000000000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Life span of this probe [sec]. +Access: Online. +AC INI-Param: NqmProbingTable_LifeSpan" + ::= {acSysNqmProbingEntry 8} + + + + acSysNqmProbingStartTime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "start time of this probe - now | pending | yyyy:MM:dd:HH:mm:ss. +Access: Online. +AC INI-Param: NqmProbingTable_StartTime" + ::= {acSysNqmProbingEntry 9} + + + + acSysNqmProbingHistoryEntriesToKeep OBJECT-TYPE + SYNTAX Unsigned32 (1..1000) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Number of probing result entries to keep in the history file. +Access: Online. +AC INI-Param: NqmProbingTable_HistoryEntriesToKeep" + ::= {acSysNqmProbingEntry 10} + + + + -- **************************************** + -- acSysNqmResponder table declaration + -- **************************************** + acSysNqmResponderTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysNqmResponderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {asSysNqm 23} + + + + -- **************************************** + -- acSysNqmResponder table entry + -- **************************************** + acSysNqmResponderEntry OBJECT-TYPE + SYNTAX AcSysNqmResponderEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysNqmResponderIndex} + ::= {acSysNqmResponderTable 1} + + + + -- **************************************** + -- acSysNqmResponder TABLE + -- **************************************** + AcSysNqmResponderEntry ::= SEQUENCE { + acSysNqmResponderIndex Unsigned32, + acSysNqmResponderRowStatus RowStatus, + acSysNqmResponderAction INTEGER, + acSysNqmResponderActionRes INTEGER, + acSysNqmResponderResponderName SnmpAdminString, + acSysNqmResponderActive Unsigned32, + acSysNqmResponderLocalPort Unsigned32, + acSysNqmResponderSourceInterfaceName RowPointer + } + + + + acSysNqmResponderIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index Field for line. Internal parameter. +AC INI-Param: NqmResponderTable_Index" + ::= {acSysNqmResponderEntry 1} + + + + acSysNqmResponderRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "ROWSTATUS field for line. Internal parameter. +AC INI-Param: NqmResponderTable_RowStatus" + ::= {acSysNqmResponderEntry 2} + + + + acSysNqmResponderAction OBJECT-TYPE + SYNTAX INTEGER { + none(0) + + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS. Internal parameter. +AC INI-Param: NqmResponderTable_Action" + ::= {acSysNqmResponderEntry 3} + + + + acSysNqmResponderActionRes OBJECT-TYPE + SYNTAX INTEGER { + succeeded(0) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Mangement Field for ACTIONS RESULT. Internal parameter. +AC INI-Param: NqmResponderTable_ActionRes" + ::= {acSysNqmResponderEntry 4} + + + + acSysNqmResponderResponderName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..64)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Responder descriptive name. +Access: Online. +AC INI-Param: NqmResponderTable_ResponderName" + ::= {acSysNqmResponderEntry 5} + + + + acSysNqmResponderActive OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Responder Enable. +Access: Online. +AC INI-Param: NqmResponderTable_Active" + ::= {acSysNqmResponderEntry 6} + + + + acSysNqmResponderLocalPort OBJECT-TYPE + SYNTAX Unsigned32 (3900..3990) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Local transport layer port number. +Ports are: 3900, 3910, 3920, 3930, 3940, 3950, 3960, 3970, +3980, 3990. +Access: Online. +AC INI-Param: NqmResponderTable_LocalPort" + ::= {acSysNqmResponderEntry 7} + + + + acSysNqmResponderSourceInterfaceName OBJECT-TYPE + SYNTAX RowPointer + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Name of source interface. +Access: Online. +AC INI-Param: NqmResponderTable_SourceInterfaceName" + ::= {acSysNqmResponderEntry 8} + + + + acSystemStatus OBJECT IDENTIFIER ::= {acSystem 2} + + + acSysType OBJECT IDENTIFIER ::= {acSystemStatus 1} + + + acSysTypeProduct OBJECT-TYPE + SYNTAX INTEGER { + acUnknown(0) +, + acTrunkPack-08(1) +, + acMediaPack-108(2) +, + acMediaPack-124(3) +, + acTrunkPack-1600(20) +, + acTPM1100(22) +, + acTrunkPack-260-IpMedia(23) +, + acTrunkPack-1610(24) +, + acMediaPack-104(25) +, + acMediaPack-102(26) +, + acTrunkPack-1610-SB(29) +, + acTrunkPack-1610-IpMedia(30) +, + acTrunkPack-MEDIANT2000(31) +, + acTrunkPack-STRETTO2000(32) +, + acTrunkPack-IPMServer2000(33) +, + acTrunkPack-2810(34) +, + acTrunkPack-260-UN-IpMedia (35) +, + acTrunkPack-260-IpMedia-30Ch(36) +, + acTrunkPack-260-IpMedia-60Ch(37) +, + acTrunkPack-260-IpMedia-120Ch(38) +, + acTrunkPack-260RT-IpMedia-30Ch(39) +, + acTrunkPack-260RT-IpMedia-60Ch(40) +, + acTrunkPack-260RT-IpMedia-120Ch(41) +, + acTrunkPack-260(42) +, + acTrunkPack-260-UN (43) +, + acTPM1100-PCM(44) +, + acTrunkPack-6310(45) +, + acTPM6300(46) +, + acMediant1000(47) +, + acIPMedia3000(48) +, + acMediant3000(49) +, + acStretto3000(50) +, + acTrunkPack-6310-IpMedia(51) +, + acTrunkPack-6310-SB(52) +, + acATP-1610(53) +, + acATP-260(54) +, + acATP-260-UN(55) +, + acMediaPack-118(56) +, + acMediaPack114(57) +, + acMediaPack112(58) +, + acTrunkPack-6310-T3(59) +, + acMediant3000-T3(60) +, + acIPmedia3000-T3(61) +, + acTrunkPack-6310-T3-IpMedia(62) +, + acTrunkPack-8410(63) +, + acTrunkPack-8410-IpMedia(64) +, + acMediant-600(65) +, + acTrunkPack-12610(66) +, + acMediant1000-MSBG(67) +, + acMediant-600-MSBG(68) +, + acMediant800-MSBG(69) +, + acMediant-4000(70) +, + acMediant1000-ESBC(71) +, + acMediant800-ESBC(72) +, + acHosted(73) +, + acMediant-850-MSBG(74) +, + acMediant-850-ESBC(75) +, + acMediant-500-MSBG(76) +, + acMediant-500-ESBC(77) +, + acMediant-2600(78) +, + acMediant-VE-SBC(79) +, + acMediant-VE-H-SBC(80) +, + acMediant-SE-SBC(81) +, + acMediant-SE-H-SBC(82) +, + acMediant-6000-SBC(83) +, + acMediant-500L-MSBG(84) +, + acMediant-500L-ESBC(85) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the Board. +AC INI-Param: N/A" + ::= {acSysType 1} + + + + acSysTypeDSP OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Dsp Type. +AC INI-Param: N/A" + ::= {acSysType 2} + + + + acSysTypeModule OBJECT-TYPE + SYNTAX INTEGER { + soloist (0) +, + second(1) +, + first(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysType 3} + + + + acSysTypeCPUSpeed OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "CPU Speed. +AC INI-Param: N/A" + ::= {acSysType 4} + + + + acSysVersion OBJECT IDENTIFIER ::= {acSystemStatus 2} + + + acSysVersionSoftware OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TrunkPack Software Version. +AC INI-Param: N/A" + ::= {acSysVersion 1} + + + + acSysVersionFlash OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Flash [BootLoader] Version. +AC INI-Param: N/A" + ::= {acSysVersion 2} + + + + acSysVersionIniFile OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Ini file version. +AC INI-Param: INIFileVersion" + ::= {acSysVersion 3} + + + + acSysVersionSoftwareDate OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..40)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "TrunkPack Software Date. +AC INI-Param: N/A" + ::= {acSysVersion 4} + + + + acSysId OBJECT IDENTIFIER ::= {acSystemStatus 3} + + + acSysIdName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The name fo the board. +AC INI-Param: N/A" + ::= {acSysId 1} + + + + acSysIdSerialNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "serial number of board. +AC INI-Param: N/A" + ::= {acSysId 2} + + + + acSysIdSlotNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Slot number. +AC INI-Param: N/A" + ::= {acSysId 3} + + + + acSysIdFirstSerialNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The device's first serial number. +When the device is part of a dual module board this is the +first module's serial number. +When the device is the first module in a dual module or the +device is not in a dual module board, the values for asSysIdSerialNumber +and acSysIdFirstSerialNumber are the same. +AC INI-Param: N/A" + ::= {acSysId 4} + + + + acSysCount OBJECT IDENTIFIER ::= {acSystemStatus 4} + + + acSysCountDSPs OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DSP Count. +AC INI-Param: N/A" + ::= {acSysCount 1} + + + + acSysCountChannels OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Channel Count. +Analog or Mixed board - the returned value is the number of +analog channels. +Digital board - the number of digitial channels. +AC INI-Param: N/A" + ::= {acSysCount 2} + + + + acSysCountTrunks OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Trunks Count. +AC INI-Param: N/A" + ::= {acSysCount 3} + + + + acSysState OBJECT IDENTIFIER ::= {acSystemStatus 5} + + + acSysStateTemperature OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature of the board in degrees Celsius, should not go higher +then 60!. +AC INI-Param: N/A" + ::= {acSysState 1} + + + + acSysStateOperational OBJECT-TYPE + SYNTAX INTEGER { + disabled(1) +, + enabled(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational state of the gateway. +AC INI-Param: N/A" + ::= {acSysState 2} + + + + acSysStateHAupdateInProgress OBJECT-TYPE + SYNTAX INTEGER { + updateDone(1) +, + updateInProgress(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates during update process, which done between active and +redundant boards. +AC INI-Param: N/A" + ::= {acSysState 3} + + + + acSysStateGWSeverity OBJECT-TYPE + SYNTAX INTEGER { + noAlarm(0) +, + indeterminate(1) +, + warning(2) +, + minor(3) +, + major(4) +, + critical(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The highest alarm severity on the device. +AC INI-Param: N/A" + ::= {acSysState 4} + + + + acSysStateIsPstnManagementEnable OBJECT-TYPE + SYNTAX INTEGER { + disable(0) +, + enable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is Pstn Management Enable +0 - Disable +1 - Enable. +AC INI-Param: N/A" + ::= {acSysState 5} + + + + acSysStateErrorMessage OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..512)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Error Messages from the board. +AC INI-Param: N/A" + ::= {acSysState 6} + + + + acSysStateErrorID OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Error Message ID. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysState 7} + + + + acSysStateDataCpuUtilization OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Data CPU usage in percentage. +AC INI-Param: N/A" + ::= {acSysState 8} + + + + acSysStateDataMemoryUtilization OBJECT-TYPE + SYNTAX Unsigned32 (0..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Data memory usage in percentage. +AC INI-Param: N/A" + ::= {acSysState 9} + + + + acSysNetwork OBJECT IDENTIFIER ::= {acSystemStatus 6} + + + acSysEthernet OBJECT IDENTIFIER ::= {acSysNetwork 1} + + + acSysEthernetFirstPortDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex(0) +, + fullDuplex(1) +, + forceModeValue(2) +, + notAvailable(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "full-duplex or half-duplex connection. +AC INI-Param: N/A" + ::= {acSysEthernet 1} + + + + acSysEthernetFirstPortSpeed OBJECT-TYPE + SYNTAX INTEGER { + forceModeValue(2) +, + notAvailable(3) +, + ac10Mbps(10) +, + ac100Mbps(100) +, + ac1000Mbps(1000) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysEthernet 2} + + + + acSysEthernetSecondPortDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex(0) +, + fullDuplex(1) +, + forceModeValue(2) +, + notAvailable(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "full-duplex or half-duplex connection. +AC INI-Param: N/A" + ::= {acSysEthernet 3} + + + + acSysEthernetSecondPortSpeed OBJECT-TYPE + SYNTAX INTEGER { + forceModeValue(2) +, + notAvailable(3) +, + ac10Mbps(10) +, + ac100Mbps(100) +, + ac1000Mbps(1000) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysEthernet 4} + + + + acSysEthernetActivePortNumber OBJECT-TYPE + SYNTAX Unsigned32 (0..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the current active ethernet port number. +0 - not relevant. +AC INI-Param: N/A" + ::= {acSysEthernet 5} + + + + acSysEthernetPowerBudget OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the availbale power budget for the system. +AC INI-Param: N/A" + ::= {acSysEthernet 6} + + + + acSysEthernetPowerAllocated OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the allocated power in the system. +AC INI-Param: N/A" + ::= {acSysEthernet 7} + + + + acSysEthernetPowerRemaining OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Display the availbale remaining power in the system. +AC INI-Param: N/A" + ::= {acSysEthernet 8} + + + + -- **************************************** + -- acSysEthernetStatus table declaration + -- **************************************** + acSysEthernetStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysEthernetStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ethernet relevant information" + ::= {acSysEthernet 21} + + + + -- **************************************** + -- acSysEthernetStatus table entry + -- **************************************** + acSysEthernetStatusEntry OBJECT-TYPE + SYNTAX AcSysEthernetStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysEthernetStatusIndex} + ::= {acSysEthernetStatusTable 1} + + + + -- **************************************** + -- acSysEthernetStatus TABLE + -- **************************************** + AcSysEthernetStatusEntry ::= SEQUENCE { + acSysEthernetStatusIndex Unsigned32, + acSysEthernetStatusPortDuplexMode INTEGER, + acSysEthernetStatusPortSpeed INTEGER, + acSysEthernetStatusActivePortNumber INTEGER, + acSysEthernetStatusPortState INTEGER, + acSysEthernetStatusPowerOverEthernet INTEGER, + acSysEthernetStatusAllocatedPower SnmpAdminString, + acSysEthernetStatusGroup SnmpAdminString, + acSysEthernetStatusPowerOverEthernetDetails SnmpAdminString + } + + + + acSysEthernetStatusIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The row's index. +On 8410 Systems: +Index 1 – related to GBE port no.1 in the TER (Media). +Index 2 – related to GBE port no.2 in the TER (Media). +Index 3 – related to port 1A in PEM #1 (Control). + Index 4 – related to port 1B in PEM #2 (Control). +Index 5 – related to port 2A in PEM #1 (OAM). +Index 6 – related to port 2B in PEM #2 (OAM). +On MSBG only: +1-12 LAN interfaces. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 1} + + + + acSysEthernetStatusPortDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex(0) +, + fullDuplex(1) +, + forceModeValue(2) +, + notAvailable(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "full-duplex or half-duplex connection. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 2} + + + + acSysEthernetStatusPortSpeed OBJECT-TYPE + SYNTAX INTEGER { + forceModeValue(2) +, + notAvailable(3) +, + ac10Mbps(10) +, + ac100Mbps(100) +, + ac1000Mbps(1000) +, + ac10Gbps(10000) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port speed. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 3} + + + + acSysEthernetStatusActivePortNumber OBJECT-TYPE + SYNTAX INTEGER { + notActive(0) +, + active(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of ethernet port - active or not active. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 4} + + + + acSysEthernetStatusPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + blocking(1) +, + learning(2) +, + forwarding(3) +, + notApplicable(10) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port State. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 5} + + + + acSysEthernetStatusPowerOverEthernet OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0) +, + active(1) +, + notActive(2) +, + poeAlarm(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power over Ethernet interface status. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 6} + + + + acSysEthernetStatusAllocatedPower OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power consumed by the port. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 7} + + + + acSysEthernetStatusGroup OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The group which the port is a member of. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 8} + + + + acSysEthernetStatusPowerOverEthernetDetails OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power over Ethernet interface status details. +AC INI-Param: N/A" + ::= {acSysEthernetStatusEntry 9} + + + + -- **************************************** + -- acSysWanStatus table declaration + -- **************************************** + acSysWanStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysWanStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ethernet relevant information" + ::= {acSysEthernet 22} + + + + -- **************************************** + -- acSysWanStatus table entry + -- **************************************** + acSysWanStatusEntry OBJECT-TYPE + SYNTAX AcSysWanStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysWanStatusIndex} + ::= {acSysWanStatusTable 1} + + + + -- **************************************** + -- acSysWanStatus TABLE + -- **************************************** + AcSysWanStatusEntry ::= SEQUENCE { + acSysWanStatusIndex Unsigned32, + acSysWanStatusPortType INTEGER, + acSysWanStatusPortDuplexMode INTEGER, + acSysWanStatusPortSpeed INTEGER, + acSysWanStatusActivePortNumber INTEGER, + acSysWanStatusPortState INTEGER, + acSysWanStatusPowerOverEthernet INTEGER + } + + + + acSysWanStatusIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..4) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The row's index. +On MSBG Only. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 1} + + + + acSysWanStatusPortType OBJECT-TYPE + SYNTAX INTEGER { + ethernet(0) +, + t1(1) +, + sHDSL(2) +, + adslVdsl(3) +, + invalidPhyType(4) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 2} + + + + acSysWanStatusPortDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex(0) +, + fullDuplex(1) +, + forceModeValue(2) +, + notAvailable(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "full-duplex or half-duplex connection. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 3} + + + + acSysWanStatusPortSpeed OBJECT-TYPE + SYNTAX INTEGER { + forceModeValue(2) +, + notAvailable(3) +, + ac10Mbps(10) +, + ac100Mbps(100) +, + ac1000Mbps(1000) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port speed. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 4} + + + + acSysWanStatusActivePortNumber OBJECT-TYPE + SYNTAX INTEGER { + notActive(0) +, + active(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of ethernet port - active or not active. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 5} + + + + acSysWanStatusPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + blocking(1) +, + learning(2) +, + forwarding(3) +, + notApplicable(10) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port State. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 6} + + + + acSysWanStatusPowerOverEthernet OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0) +, + active(1) +, + notActive(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power over Ethernet interface status. +AC INI-Param: N/A" + ::= {acSysWanStatusEntry 7} + + + + -- **************************************** + -- acSysEthernetRedundantStatus table declaration + -- **************************************** + acSysEthernetRedundantStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysEthernetRedundantStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Ethernet relevant information for redundant board (relevant for HA system). {@}Relevant only to M4K." + ::= {acSysEthernet 23} + + + + -- **************************************** + -- acSysEthernetRedundantStatus table entry + -- **************************************** + acSysEthernetRedundantStatusEntry OBJECT-TYPE + SYNTAX AcSysEthernetRedundantStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysEthernetRedundantStatusIndex} + ::= {acSysEthernetRedundantStatusTable 1} + + + + -- **************************************** + -- acSysEthernetRedundantStatus TABLE + -- **************************************** + AcSysEthernetRedundantStatusEntry ::= SEQUENCE { + acSysEthernetRedundantStatusIndex Unsigned32, + acSysEthernetRedundantStatusPortDuplexMode INTEGER, + acSysEthernetRedundantStatusPortSpeed INTEGER, + acSysEthernetRedundantStatusActivePortNumber INTEGER, + acSysEthernetRedundantStatusPortState INTEGER, + acSysEthernetRedundantStatusPowerOverEthernet INTEGER, + acSysEthernetRedundantStatusAllocatedPower SnmpAdminString, + acSysEthernetRedundantStatusGroup SnmpAdminString, + acSysEthernetRedundantStatusPowerOverEthernetDetails + SnmpAdminString + } + + + + acSysEthernetRedundantStatusIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The row's index. +On MSBG only: +1-12 LAN interfaces. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 1} + + + + acSysEthernetRedundantStatusPortDuplexMode OBJECT-TYPE + SYNTAX INTEGER { + halfDuplex(0) +, + fullDuplex(1) +, + forceModeValue(2) +, + notAvailable(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "full-duplex or half-duplex connection. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 2} + + + + acSysEthernetRedundantStatusPortSpeed OBJECT-TYPE + SYNTAX INTEGER { + forceModeValue(2) +, + notAvailable(3) +, + ac10Mbps(10) +, + ac100Mbps(100) +, + ac1000Mbps(1000) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "port speed. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 3} + + + + acSysEthernetRedundantStatusActivePortNumber OBJECT-TYPE + SYNTAX INTEGER { + notActive(0) +, + active(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of ethernet port - active or not active. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 4} + + + + acSysEthernetRedundantStatusPortState OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + blocking(1) +, + learning(2) +, + forwarding(3) +, + notApplicable(10) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Port State. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 5} + + + + acSysEthernetRedundantStatusPowerOverEthernet OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0) +, + active(1) +, + notActive(2) +, + poeAlarm(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power over Ethernet interface status. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 6} + + + + acSysEthernetRedundantStatusAllocatedPower OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power consumed by the port. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 7} + + + + acSysEthernetRedundantStatusGroup OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The group which the port is a member of. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 8} + + + + acSysEthernetRedundantStatusPowerOverEthernetDetails OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Power over Ethernet interface status details. +AC INI-Param: N/A" + ::= {acSysEthernetRedundantStatusEntry 9} + + + + acSysNAT OBJECT IDENTIFIER ::= {acSysNetwork 2} + + + acSysNATType OBJECT-TYPE + SYNTAX INTEGER { + stunDisabled(-1) +, + none(0) +, + fullCone(1) +, + restricted(2) +, + portRestricted(3) +, + symmetric(4) +, + symmetricFireWall(5) +, + blocked(6) +, + unknown(7) +, + natIdentificationInProgress(10) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Identified NAT type. +-1 - STUN client is disabled +0 - None +1 - FullCone +2 - Restricted +3 - PortRestricted +4 - Symmetric +5 - SymmetricFireWall +6 - Blocked +7 - Unknown +10 - NAT identification in progress. +AC INI-Param: N/A" + ::= {acSysNAT 1} + + + + acSysWebStat OBJECT IDENTIFIER ::= {acSysNetwork 3} + + + acSysWebStatPasswordControlViaSNMP OBJECT-TYPE + SYNTAX INTEGER { + disabled(0) +, + enabled(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "If set to 1 it will allow changing the web interface username +and password via SNMP. +AC INI-Param: WEBPasswordControlViaSNMP " + ::= {acSysWebStat 1} + + + + acSysIPStatus OBJECT IDENTIFIER ::= {acSysNetwork 4} + + + -- **************************************** + -- acSysInterfaceStatus table declaration + -- **************************************** + acSysInterfaceStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysInterfaceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysIPStatus 21} + + + + -- **************************************** + -- acSysInterfaceStatus table entry + -- **************************************** + acSysInterfaceStatusEntry OBJECT-TYPE + SYNTAX AcSysInterfaceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysInterfaceStatusEntryIndex,acSysInterfaceStatusTypeIndex} + ::= {acSysInterfaceStatusTable 1} + + + + -- **************************************** + -- acSysInterfaceStatus TABLE + -- **************************************** + AcSysInterfaceStatusEntry ::= SEQUENCE { + acSysInterfaceStatusEntryIndex Unsigned32, + acSysInterfaceStatusTypeIndex Unsigned32, + acSysInterfaceStatusApplicationTypes INTEGER, + acSysInterfaceStatusMode INTEGER, + acSysInterfaceStatusIPAddress SnmpAdminString, + acSysInterfaceStatusPrefixLength Unsigned32, + acSysInterfaceStatusGateway SnmpAdminString, + acSysInterfaceStatusVlanID Unsigned32, + acSysInterfaceStatusName SnmpAdminString + } + + + + acSysInterfaceStatusEntryIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..31) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Related Interface index in the interface configuration table +(in case the table is empty - meaning there is only single +IP the index will appear with 0). +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 1} + + + + acSysInterfaceStatusTypeIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " +1 - IP Address. +2 - IPv6 Link-Local Address. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 2} + + + + acSysInterfaceStatusApplicationTypes OBJECT-TYPE + SYNTAX INTEGER { + oam(0) +, + media(1) +, + control(2) +, + oamAndMedia(3) +, + oamAndControl(4) +, + mediaAndControl(5) +, + oamAndMediaAndControl(6) +, + data(11) +, + maintenance(99) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type assigned to the interface. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 3} + + + + acSysInterfaceStatusMode OBJECT-TYPE + SYNTAX INTEGER { + iPv6PrefixManual(3) +, + iPv6Manual(4) +, + iPv4Manual(10) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Interface configuration mode. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 4} + + + + acSysInterfaceStatusIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IP Address (can be either IPv4 or IPv6) for this interface. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 5} + + + + acSysInterfaceStatusPrefixLength OBJECT-TYPE + SYNTAX Unsigned32 (0..128) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ‘1’ bits in this interface’s netmask. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 6} + + + + acSysInterfaceStatusGateway OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Default Gateway. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 7} + + + + acSysInterfaceStatusVlanID OBJECT-TYPE + SYNTAX Unsigned32 (0..4094) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "VLAN ID of this interface. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 8} + + + + acSysInterfaceStatusName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..15)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "16 character string of this interface’s name. +AC INI-Param: N/A" + ::= {acSysInterfaceStatusEntry 9} + + + + -- **************************************** + -- acSysDataInterfaceStatus table declaration + -- **************************************** + acSysDataInterfaceStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysDataInterfaceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysIPStatus 22} + + + + -- **************************************** + -- acSysDataInterfaceStatus table entry + -- **************************************** + acSysDataInterfaceStatusEntry OBJECT-TYPE + SYNTAX AcSysDataInterfaceStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysDataInterfaceStatusIndex} + ::= {acSysDataInterfaceStatusTable 1} + + + + -- **************************************** + -- acSysDataInterfaceStatus TABLE + -- **************************************** + AcSysDataInterfaceStatusEntry ::= SEQUENCE { + acSysDataInterfaceStatusIndex Unsigned32, + acSysDataInterfaceStatusName SnmpAdminString, + acSysDataInterfaceStatusIPAddress SnmpAdminString, + acSysDataInterfaceStatusNetmask SnmpAdminString, + acSysDataInterfaceStatusInfo SnmpAdminString, + acSysDataInterfaceStatusDescription SnmpAdminString, + acSysDataInterfaceStatusOperationalState INTEGER, + acSysDataInterfaceStatusStateTime SnmpAdminString, + acSysDataInterfaceStatusUptime SnmpAdminString, + acSysDataInterfaceStatusMtuMode SnmpAdminString, + acSysDataInterfaceStatusDnsStatus SnmpAdminString, + acSysDataInterfaceStatusRxPackets Counter32, + acSysDataInterfaceStatusRxBytes Counter32, + acSysDataInterfaceStatusRxDropped Counter32, + acSysDataInterfaceStatusRxErrors Counter32, + acSysDataInterfaceStatusTxPackets Counter32, + acSysDataInterfaceStatusTxBytes Counter32, + acSysDataInterfaceStatusTxDropped Counter32, + acSysDataInterfaceStatusTxErrors Counter32, + acSysDataInterfaceStatusMinutes Unsigned32, + acSysDataInterfaceStatusMinuteInputRate SnmpAdminString, + acSysDataInterfaceStatusMinuteOutputRate SnmpAdminString, + acSysDataInterfaceStatusSeconds Unsigned32, + acSysDataInterfaceStatusSecondInputRate SnmpAdminString, + acSysDataInterfaceStatusSecondOutputRate SnmpAdminString + } + + + + acSysDataInterfaceStatusIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..69) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 1} + + + + acSysDataInterfaceStatusName OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..70)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Interface name. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 2} + + + + acSysDataInterfaceStatusIPAddress OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "IPv4 Address for this interface. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 3} + + + + acSysDataInterfaceStatusNetmask OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..45)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Netmask for this interface. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 4} + + + + acSysDataInterfaceStatusInfo OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..30)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Status of interface can be one of the following: Unknown, Disabled, +Enabled, Connected or Disconnected. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 5} + + + + acSysDataInterfaceStatusDescription OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..30)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Description of the interface. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 6} + + + + acSysDataInterfaceStatusOperationalState OBJECT-TYPE + SYNTAX INTEGER { + down(0) +, + up(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Protocol is UP or Down. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 7} + + + + acSysDataInterfaceStatusStateTime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..9)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time elapsed since the interface entered its current state (HH:MM:SS). +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 8} + + + + acSysDataInterfaceStatusUptime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..9)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time since the interface was created (HH:MM:SS). +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 9} + + + + acSysDataInterfaceStatusMtuMode OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "the Maximum Transmission Unit (MTU) on the specified interface. +Can be: automatically, DHCP or value (in bytes). +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 10} + + + + acSysDataInterfaceStatusDnsStatus OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "DNS servers information for this interface. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 11} + + + + acSysDataInterfaceStatusRxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total packets received. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 12} + + + + acSysDataInterfaceStatusRxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total bytes received. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 13} + + + + acSysDataInterfaceStatusRxDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No space in receive buffers available. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 14} + + + + acSysDataInterfaceStatusRxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bad packets received. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 15} + + + + acSysDataInterfaceStatusTxPackets OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total packets transmitted. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 16} + + + + acSysDataInterfaceStatusTxBytes OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Total bytes transmitted. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 17} + + + + acSysDataInterfaceStatusTxDropped OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "No space in transmit buffers available. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 18} + + + + acSysDataInterfaceStatusTxErrors OBJECT-TYPE + SYNTAX Counter32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Packet transmit problems. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 19} + + + + acSysDataInterfaceStatusMinutes OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value determines time interval in minutes, on which the +rate sampling is done. The value is relevant to the columns +MinuteInputRate and MinuteOutputRate. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 20} + + + + acSysDataInterfaceStatusMinuteInputRate OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average received bits rate (bps) and packets rate (pps) +during the last ‘acSysDataInterfaceStatusMinutes’ minutes. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 21} + + + + acSysDataInterfaceStatusMinuteOutputRate OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average transmitted bits rate (bps) and packets rate (pps) +during the last ‘acSysDataInterfaceStatusMinutes’ minutes. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 22} + + + + acSysDataInterfaceStatusSeconds OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This value determines time interval in seconds on which the +rate sampling is done. The value is relevant to the columns +SecondInputRate and SecondOutputRate. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 23} + + + + acSysDataInterfaceStatusSecondInputRate OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average received bits rate (bps) and packets rate (pps) +during the last ‘acSysDataInterfaceStatusSeconds’ seconds. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 24} + + + + acSysDataInterfaceStatusSecondOutputRate OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..100)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The average transmitted bits rate (bps) and packets rate (pps) +during the last ‘acSysDataInterfaceStatusSeconds’ seconds. +AC INI-Param: N/A" + ::= {acSysDataInterfaceStatusEntry 25} + + + + acSysTime OBJECT IDENTIFIER ::= {acSystemStatus 7} + + + acSysTimeUp OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Time (in Seconds) that the board is alive. +AC INI-Param: N/A" + ::= {acSysTime 1} + + + + acSysVoicePrompt OBJECT IDENTIFIER ::= {acSystemStatus 8} + + + acSysVoicePromptTotalMemorySize OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Get the total voice prompt memory size. +AC INI-Param: N/A" + ::= {acSysVoicePrompt 1} + + + + acSysVoicePromptMaxFreeMemorySize OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Get the maximu voice prompt memory free size. +AC INI-Param: N/A" + ::= {acSysVoicePrompt 2} + + + + acSysRepositoryAMS OBJECT IDENTIFIER ::= {acSystemStatus 9} + + + acSysRepositoryAMSIsReadyForUpdate OBJECT-TYPE + SYNTAX INTEGER { + false(0) +, + true(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Verify if the old repository is free or there are signals still +using it. +AC INI-Param: N/A" + ::= {acSysRepositoryAMS 1} + + + + acSysHAStatus OBJECT IDENTIFIER ::= {acSystemStatus 10} + + + acSysHAStatusReady OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(1) +, + yes(2) +, + no(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Defines whether the M3K system supports HA or not. +AC INI-Param: N/A" + ::= {acSysHAStatus 1} + + + + acSysHAStatusNetworkWatchdogStatus OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..400)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + " +AC INI-Param: N/A" + ::= {acSysHAStatus 2} + + + + acSysLDAPStatus OBJECT IDENTIFIER ::= {acSystemStatus 11} + + + acSysLDAPStatusServerMode OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0) +, + connectionBroken(1) +, + connecting(2) +, + connected(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "LDAP server status. +AC INI-Param: N/A" + ::= {acSysLDAPStatus 1} + + + + acSysNqmStatus OBJECT IDENTIFIER ::= {acSystemStatus 12} + + + -- **************************************** + -- acSysNqmHistory table declaration + -- **************************************** + acSysNqmHistoryTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysNqmHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysNqmStatus 1} + + + + -- **************************************** + -- acSysNqmHistory table entry + -- **************************************** + acSysNqmHistoryEntry OBJECT-TYPE + SYNTAX AcSysNqmHistoryEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysNqmHistorySenderIndex,acSysNqmHistoryIndex} + ::= {acSysNqmHistoryTable 1} + + + + -- **************************************** + -- acSysNqmHistory TABLE + -- **************************************** + AcSysNqmHistoryEntry ::= SEQUENCE { + acSysNqmHistorySenderIndex Unsigned32, + acSysNqmHistoryIndex Unsigned32, + acSysNqmHistoryProbeTime SnmpAdminString, + acSysNqmHistoryIsValid SnmpAdminString, + acSysNqmHistoryRoundTripTime Unsigned32, + acSysNqmHistoryPacketLossTx Unsigned32, + acSysNqmHistoryPacketLossRx Unsigned32, + acSysNqmHistoryTotalPacketLoss Unsigned32, + acSysNqmHistoryJitterTx Unsigned32, + acSysNqmHistoryJitterRx Unsigned32, + acSysNqmHistoryTotalJitter Unsigned32, + acSysNqmHistoryCqMos Unsigned32, + acSysNqmHistoryLqMos Unsigned32 + } + + + + acSysNqmHistorySenderIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..9) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Index of Sender from acSysNqmSenderTable. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 1} + + + + acSysNqmHistoryIndex OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Internal index. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 2} + + + + acSysNqmHistoryProbeTime OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..32)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "NULL terminated. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 3} + + + + acSysNqmHistoryIsValid OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..16)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Null terminated Yes/No or textual reason. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 4} + + + + acSysNqmHistoryRoundTripTime OBJECT-TYPE + SYNTAX Unsigned32 (0..99999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "round trip time [msec]. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 5} + + + + acSysNqmHistoryPacketLossTx OBJECT-TYPE + SYNTAX Unsigned32 (0..999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "outging packet loss. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 6} + + + + acSysNqmHistoryPacketLossRx OBJECT-TYPE + SYNTAX Unsigned32 (0..999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "incoming packet loss. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 7} + + + + acSysNqmHistoryTotalPacketLoss OBJECT-TYPE + SYNTAX Unsigned32 (0..9999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "sum of Rx and Tx packet loss. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 8} + + + + acSysNqmHistoryJitterTx OBJECT-TYPE + SYNTAX Unsigned32 (0..999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "outgoing jitter. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 9} + + + + acSysNqmHistoryJitterRx OBJECT-TYPE + SYNTAX Unsigned32 (0..999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "incoming jitter. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 10} + + + + acSysNqmHistoryTotalJitter OBJECT-TYPE + SYNTAX Unsigned32 (0..9999999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "round trip jitter. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 11} + + + + acSysNqmHistoryCqMos OBJECT-TYPE + SYNTAX Unsigned32 (0..99999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Conversation quality MOS. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 12} + + + + acSysNqmHistoryLqMos OBJECT-TYPE + SYNTAX Unsigned32 (0..99999) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Listener quality MOS. +AC INI-Param: N/A" + ::= {acSysNqmHistoryEntry 13} + + + + acSysDataStatus OBJECT IDENTIFIER ::= {acSystemStatus 13} + + + acSysDataStatusFirewallTCPConnections OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of TCP firewall connections. +AC INI-Param: N/A" + ::= {acSysDataStatus 1} + + + + acSysDataStatusFirewallUDPConnections OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of UDP firewall connections. +AC INI-Param: N/A" + ::= {acSysDataStatus 2} + + + + acSysDataStatusFirewallICMPConnections OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of ICMP firewall connections. +AC INI-Param: N/A" + ::= {acSysDataStatus 3} + + + + acSystemAction OBJECT IDENTIFIER ::= {acSystem 3} + + + acSysAction OBJECT IDENTIFIER ::= {acSystemAction 1} + + + acSysActionSet OBJECT IDENTIFIER ::= {acSysAction 1} + + + acSysActionSetReset OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "remote Reset. To remote reset the board, set the value of this +object to 1. +Note: Before Reset, The current boardConfiguration parameters +will be burned to the board. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 1} + + + + acSysActionSetResetControl OBJECT-TYPE + SYNTAX INTEGER { + resetFromFlashAfterBurn(1) +, + resetFromFlashNoBurn(2) +, + resetFromBootP(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the remote reset action. +1 - burn staged load image, if any, and config to flash, perform +a reset, and load from flash +2 - perform a reset, and load from flash (staged load image, +if any, and config is not burned to flash) +3 - perform a reset, and load from bootp/tftp (staged load +image, if any, and config burn is not needed) +* - an error is returned for any other value +Note: The staged load image is an image of a cmp file that +was previously loaded to a area in RAM via an HTTP upload. +Access: Instant. +AC INI-Param: RemoteResetControl" + ::= {acSysActionSet 2} + + + + acSysActionSetDefaults OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To set the board to default values, set the value of this object +to 1. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 3} + + + + acSysActionSetSaveConfig OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To save all current configuration in the board onto the flash, +set the value of this object to 1. +NOTE: Do NOT save the configuration while voice is running +- this will cause a delay. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 4} + + + + acSysActionSetAutoUpdate OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To update the system configuration according to the provisioned +IniFileUrl, set the value of this object to 1. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 5} + + + + acSysActionSetGetTimeFromNTPServer OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Initiates an immediate NTP time fetch. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 6} + + + + acSysActionSetSwUpgrade OBJECT-TYPE + SYNTAX INTEGER { + hitLessUpGrade(1) +, + systemResetUpGrade(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the type of SW upgrade in M3K HA system: +Hitless upgrade only or system reset upgrade if hitless is +not supported. +This parameter can be set by ini file and snmp. +Access: Instant. +AC INI-Param: M3KHASwUpgradeMode" + ::= {acSysActionSet 7} + + + + acSysActionSetOnLineChangesApply OBJECT-TYPE + SYNTAX INTEGER { + defaultValue(0) +, + applyChanges(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Applies the board on line changed params. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 8} + + + + acSysActionSetIPSecTLSUpgrade OBJECT-TYPE + SYNTAX INTEGER { + defaultValue(0) +, + upDateChanges(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To update the IPSec TLS configuration according to the provisioned +TLS fils URL set the value of this object to 1. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 9} + + + + acSysActionSetGWAppTLSUpgrade OBJECT-TYPE + SYNTAX INTEGER { + defaultValue(0) +, + upDateChanges(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "To update the GWApp TLS configuration according to the provisioned +TLS fils URL set the value of this object to 1. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 10} + + + + acSysActionSetConvertNetworkIFsConfiguration OBJECT-TYPE + SYNTAX INTEGER { + defaultValue(0) +, + convertAction(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "SET to 1 will convert network configuration to advance multiple +network Interfaces mode. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 11} + + + + acSysActionSetActionId OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This field is for management use and is aimed to distinguish +different managers managing a single device. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysActionSet 12} + + + + acSysActionSetAutoUpdateActionResult OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..200)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates the autoupdates operation status in the form of a +string: 'acSysActionId ; ; '. +The status field can be: 'success'\'failure'\'inProgress'. +The infromation is valid only when downloading one file at +a time. +Note - a second way of following the success of the file downloading +is to see the files name being updated in the acSysFile +subtree. +AC INI-Param: N/A" + ::= {acSysActionSet 13} + + + + acSysActionSetApplyINImethod OBJECT-TYPE + SYNTAX INTEGER { + applyAfterReset(0) +, + applyImmediate(1) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "INI parsing method. + +0 = Apply After Reset +1 = Apply Immediate + +When downloading a new INI to the gateway this parameter determine +if a parsing will be done immediately or after a reboot. + +Note that the default is immediately parsing. +Access: Instant. +AC INI-Param: ApplyINImethod" + ::= {acSysActionSet 14} + + + + acSysActionAdmin OBJECT IDENTIFIER ::= {acSysAction 2} + + + acSysActionAdminState OBJECT-TYPE + SYNTAX INTEGER { + locked(0) +, + shuttingDown(1) +, + unlocked(2) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Determines the gateway's operational state. +0 - locked: Shutdown the GW In the time frame set by acgwAdminStateLockControl. +1 - shuttingDown: (read only) Graceful Shutdown is being carried +out. +2 - unlocked: GW is in service. +Access: Online. +AC INI-Param: N/A" + ::= {acSysActionAdmin 1} + + + + acSysActionAdminStateLockTimeout OBJECT-TYPE + SYNTAX Integer32 (-1..32768) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Defines the time remaining (in seconds) for the shutdown to +complete. + 0 = immediate shutdown +-1 = waits until all calls drop (infinite) +>0 = the number of seconds to wait. +Access: Offline. +AC INI-Param: N/A" + ::= {acSysActionAdmin 2} + + + + acSysUpload OBJECT IDENTIFIER ::= {acSysAction 3} + + + acSysUploadActionType OBJECT-TYPE + SYNTAX INTEGER { + none(0) +, + upload(1) +, + remove(2) +, + actionDone(10) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Action to be carried out. Setting this field triggers the action. +File upload supported for iniFile(1), v5PortFile(16) and DataConfigurationFile(17) +only access is instant. +File removal supported for all other then iniFile(1), casFile(7), +v5PortFile(16) and DataConfigurationFile(17), (v5PortFile +removal is done via acV5PortActionType) access is offline. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysUpload 1} + + + + acSysUploadFileType OBJECT-TYPE + SYNTAX INTEGER { + iniFile(1) +, + cptFile(2) +, + vpFile(3) +, + prerecordedTonesFile(4) +, + fxsCoeffFile(5) +, + fxoCoeffFile(6) +, + casFile(7) +, + xmlFile(8) +, + externalCoderFile(9) +, + userInfoFile(10) +, + dialPlanFile(11) +, + tlsPKeyFile(12) +, + tlsCertFile(13) +, + tlsRootFile(14) +, + videoFontFile(15) +, + v5PortFile(16) +, + dataConfigurationFile(17) +, + amdSensitivityFile(18) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The file type to be uploaded. +Note - for file types with more then one instance (like CAS +files) use the acSysActionFileInstance to specify which instance +you want to upload. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysUpload 2} + + + + acSysUploadFileNumber OBJECT-TYPE + SYNTAX Integer32 (-1..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "File number for file types that have more then one file instance, +such as CAS, VideoFont etc'. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysUpload 3} + + + + acSysUploadFileURI OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..254)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "URI indicating file location to be downloaded to. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysUpload 4} + + + + acSysUploadActionID OBJECT-TYPE + SYNTAX Unsigned32 (0..2147483647) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This field is for management use and is aimed to distinguish +different managers managing a single device. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysUpload 5} + + + + acSysUploadActionResult OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..40)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Action result. Includes action status (success, failure or inProgress), +action ID. +AC INI-Param: N/A" + ::= {acSysUpload 6} + + + + acSystemChassis OBJECT IDENTIFIER ::= {acSystem 4} + + + acSystemChassisDryContactsOutStatus OBJECT-TYPE + SYNTAX BITS { + noAlarm(0) +, + criticalAlarm(1) +, + majorAlarm(2) +, + minorAlarm(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates current state of the alarm dry contacts – out signals +(3 signals). This is a bit-map of possible conditions. +AC INI-Param: N/A" + ::= {acSystemChassis 1} + + + + acSystemChassisDryContactsInStatus OBJECT-TYPE + SYNTAX BITS { + noAlarm(0) +, + alarm1(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Indicates current state of the alarm dry contacts - in signals +(1 signals). The role of each input signal should be according +to the customer's requirements. This is a bit-map of possible +conditions. +AC INI-Param: N/A" + ::= {acSystemChassis 2} + + + + acSystemChassisLastChanged OBJECT-TYPE + SYNTAX Unsigned32 (0..4294967295) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The value of sysUpTime at the time a row is modified in any +of the acSystemChassis subtree's objects. +AC INI-Param: N/A" + ::= {acSystemChassis 3} + + + + -- **************************************** + -- acSysModule table declaration + -- **************************************** + acSysModuleTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " " + ::= {acSystemChassis 21} + + + + -- **************************************** + -- acSysModule table entry + -- **************************************** + acSysModuleEntry OBJECT-TYPE + SYNTAX AcSysModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysModuleIndex} + ::= {acSysModuleTable 1} + + + + -- **************************************** + -- acSysModule TABLE + -- **************************************** + AcSysModuleEntry ::= SEQUENCE { + acSysModuleIndex Unsigned32, + acSysModuleGeographicalPosition Unsigned32, + acSysModuleType INTEGER, + acSysModulePresence INTEGER, + acSysModuleLicenseKeyList SnmpAdminString, + acSysModuleSerialNumber Integer32, + acSysModuleSWVersion SnmpAdminString, + acSysModuleOperationalState INTEGER, + acSysModuleHAStatus INTEGER, + acSysModuleLEDs OCTET STRING, + acSysModuleTemperature Integer32, + acSysModuleActions INTEGER, + acSysModuleFRUaction INTEGER, + acSysModuleFRUstatus INTEGER, + acSysModuleNumOfPorts Unsigned32, + acSysModuleFirstPortNum Unsigned32 + } + + + + acSysModuleIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Module number in the system. +AC INI-Param: N/A" + ::= {acSysModuleEntry 1} + + + + acSysModuleGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. 1 being the bottom slot and +so on. +AC INI-Param: N/A" + ::= {acSysModuleEntry 2} + + + + acSysModuleType OBJECT-TYPE + SYNTAX INTEGER { + acUnknown(0) +, + acTrunkPack-08(1) +, + acMediaPack-108(2) +, + acMediaPack-124(3) +, + acTrunkPack-1600(20) +, + acTPM1100(22) +, + acTrunkPack-260-IpMedia(23) +, + acTrunkPack-1610(24) +, + acMediaPack-104(25) +, + acMediaPack-102(26) +, + acTrunkPack-1610-SB(29) +, + acTrunkPack-1610-IpMedia(30) +, + acTrunkPack-MEDIANT2000(31) +, + acTrunkPack-STRETTO2000(32) +, + acTrunkPack-IPMServer2000(33) +, + acTrunkPack-2810(34) +, + acTrunkPack-260-UN-IpMedia (35) +, + acTrunkPack-260-IpMedia-30Ch(36) +, + acTrunkPack-260-IpMedia-60Ch(37) +, + acTrunkPack-260-IpMedia-120Ch(38) +, + acTrunkPack-260RT-IpMedia-30Ch(39) +, + acTrunkPack-260RT-IpMedia-60Ch(40) +, + acTrunkPack-260RT-IpMedia-120Ch(41) +, + acTrunkPack-260(42) +, + acTrunkPack-260-UN (43) +, + acTPM1100-PCM(44) +, + acTrunkPack-6310(45) +, + acTPM6300(46) +, + acMediant1000(47) +, + acIPMedia3000(48) +, + acMediant3000(49) +, + acStretto3000(50) +, + acTrunkPack-6310-IpMedia(51) +, + acTrunkPack-6310-SB(52) +, + acATP-1610(53) +, + acATP-260(54) +, + acATP-260-UN(55) +, + acMediaPack-118(56) +, + acMediaPack114(57) +, + acMediaPack112(58) +, + acTrunkPack-6310-T3(59) +, + acMediant3000-T3(60) +, + acIPmedia3000-T3(61) +, + acTrunkPack-6310-T3-IpMedia(62) +, + acTrunkPack-8410(63) +, + acTrunkPack-8410-IpMedia(64) +, + acMediant-800-MSBG(69) +, + acMediant-500-MSBR(76) +, + acMediant-500-ESBC(77) +, + acMediant-500L-MSBR(84) +, + acMediant-500L-ESBC(85) +, + sA1(250) +, + sA2(251) +, + sA3(252) +, + acMediant1000CPUmodule(253) +, + acMediant1000IFDigitalModule(254) +, + acMediant1000IFAnalogModule(255) +, + acMediant1000IFBRIModule(256) +, + acMediant1000IPMediaModule(257) +, + acMediant600CPUmodule(258) +, + acMediant600IFDigitalModule(259) +, + acMediant600IFAnalogModule(260) +, + acMediant600IFBRIModule(261) +, + acMediant600IPMediaModule(262) +, + acMediant800CPUmodule(265) +, + acMediant800IFDigitalModule(266) +, + acMediant800IFAnalogModule(267) +, + acMediant800IFBRIModule(268) +, + acMediant800IFWANModule(269) +, + acMediant800IFWiFiModule(270) +, + acMediant800IPMediaModule(271) +, + acMediant800EthernetModule(272) +, + acMediant800IFT1WANModule(273) +, + acMediant800IFSHDSLModule(274) +, + acMediant800IFADSLModule(275) +, + acMediant1000IFWANModule(276) +, + acMediant1000IFT1WANModule(277) +, + acMediant1000IFSHDSLModule(278) +, + acMediant1000IFADSLModule(279) +, + acMediant4000CPUmodule(280) +, + acMediant1000EthernetModule(281) +, + acSWESBCModule(282) +, + acMediant500CPUmodule(283) +, + acMediant500IFDigitalModule(284) +, + acMediant500IFAnalogModule(285) +, + acMediant500IFBRIModule(286) +, + acMediant500IFWANModule(287) +, + acMediant500IFWiFiModule(288) +, + acMediant500IPMediaModule(289) +, + acMediant500EthernetModule(290) +, + acMediant500IFT1WANModule(291) +, + acMediant500IFSHDSLModule(292) +, + acMediant500IFADSLModule(293) +, + acMediant500IFGESFPModule(294) +, + acMediant4000MPModule(295) +, + acMediant-850-MSBG(296) +, + acMediant850CPUmodule(297) +, + acMediant850IFDigitalModule(298) +, + acMediant850IFAnalogModule(299) +, + acMediant850IFBRIModule(300) +, + acMediant850IFWANModule(301) +, + acMediant850IFWiFiModule(302) +, + acMediant850IPMediaModule(303) +, + acMediant850EthernetModule(304) +, + acMediant850IFT1WANModule(305) +, + acMediant850IFSHDSLModule(306) +, + acMediant850IFADSLModule(307) +, + acMediant2600CPUmodule(308) +, + acMediant2600MPModule(309) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The module's type. +AC INI-Param: N/A" + ::= {acSysModuleEntry 3} + + + + acSysModulePresence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the module present or missing. +AC INI-Param: N/A" + ::= {acSysModuleEntry 4} + + + + acSysModuleLicenseKeyList OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..1400)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "List of active features as enabled by the license key. SA modules +return NULL. +AC INI-Param: N/A" + ::= {acSysModuleEntry 5} + + + + acSysModuleSerialNumber OBJECT-TYPE + SYNTAX Integer32 (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The module's serial number. +For 6310 the serial number is the decimal form of the last +5 characters in the MAC Address. + SA modules return 0. + When the modules in the table are unavailable for audit (no +HA) (-1) is returned. +AC INI-Param: N/A" + ::= {acSysModuleEntry 6} + + + + acSysModuleSWVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the SW being run in the module placed . + SA Modules return NULL. +AC INI-Param: N/A" + ::= {acSysModuleEntry 7} + + + + acSysModuleOperationalState OBJECT-TYPE + SYNTAX INTEGER { + disable(1) +, + enable(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational state of the module. Determined internally by +the system. +AC INI-Param: N/A" + ::= {acSysModuleEntry 8} + + + + acSysModuleHAStatus OBJECT-TYPE + SYNTAX INTEGER { + acitveNonHA(1) +, + active(2) +, + redundant(3) +, + standAlone(4) +, + redundantNonHA(5) +, + notApplicable(6) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Modules status with in the system. Designed to define the HA +state. +AC INI-Param: N/A" + ::= {acSysModuleEntry 9} + + + + acSysModuleLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..50)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bit Field for the LEDs on the front of the module. +LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. +3 MSB are the color - + 0 - none + 1- Green + 2 - Red + 3 - Yellow + 4 - Orange + 5 - Blue + 7 - Gray (unknown). +AC INI-Param: N/A" + ::= {acSysModuleEntry 10} + + + + acSysModuleTemperature OBJECT-TYPE + SYNTAX Integer32 (-1..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature of the board in degrees Celsius. SA Modules return +0. +AC INI-Param: N/A" + ::= {acSysModuleEntry 11} + + + + acSysModuleActions OBJECT-TYPE + SYNTAX INTEGER { + reset(1) +, + switchOver(2) +, + actionDone(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Actions to be performed by the module. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysModuleEntry 12} + + + + acSysModuleFRUaction OBJECT-TYPE + SYNTAX INTEGER { + fruActionDone(1) +, + fruOutOfServiceAction(2) +, + fruBackToServiceAction(3) +, + fruNotApplicable(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Field Replace Unit actions +Relevant to IF-Module only. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysModuleEntry 13} + + + + acSysModuleFRUstatus OBJECT-TYPE + SYNTAX INTEGER { + moduleNotExist(1) +, + moduleExistOk(2) +, + moduleOutOfService(3) +, + moduleBackToServiceStart(4) +, + moduleMismatch(5) +, + moduleFaulty(6) +, + notApplicable(7) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Field Replace Unit module's status. +AC INI-Param: N/A" + ::= {acSysModuleEntry 14} + + + + acSysModuleNumOfPorts OBJECT-TYPE + SYNTAX Unsigned32 (1..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of physical interfaces in a module, analog or digital. +AC INI-Param: N/A" + ::= {acSysModuleEntry 15} + + + + acSysModuleFirstPortNum OBJECT-TYPE + SYNTAX Unsigned32 (0..19) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The logical number as seen in the general trunk/analog-channel +table of the first port in the module in question. +Since analog and digital ports can be operational at once, +analog and digital ports may have same logical number. +AC INI-Param: N/A" + ::= {acSysModuleEntry 16} + + + + -- **************************************** + -- acSysFanTray table declaration + -- **************************************** + acSysFanTrayTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysFanTrayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSystemChassis 22} + + + + -- **************************************** + -- acSysFanTray table entry + -- **************************************** + acSysFanTrayEntry OBJECT-TYPE + SYNTAX AcSysFanTrayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysFanTrayIndex} + ::= {acSysFanTrayTable 1} + + + + -- **************************************** + -- acSysFanTray TABLE + -- **************************************** + AcSysFanTrayEntry ::= SEQUENCE { + acSysFanTrayIndex Unsigned32, + acSysFanTrayGeographicalPosition Unsigned32, + acSysFanTrayExistence INTEGER, + acSysFanTrayType SnmpAdminString, + acSysFanTrayLEDs OCTET STRING, + acSysFanTraySeverity INTEGER, + acSysFanTrayFansConfiguredSpeed OCTET STRING, + acSysFanTrayFansCurrentSpeed OCTET STRING, + acSysFanTrayFansStatus OCTET STRING + } + + + + acSysFanTrayIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Fan-Tray's index in the system. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 1} + + + + acSysFanTrayGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..1) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 2} + + + + acSysFanTrayExistence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the Fan-Tray present or missing. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 3} + + + + acSysFanTrayType OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..50)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the Fan-Tray . +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 4} + + + + acSysFanTrayLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object built as a bit-field which represents the Fan-Tray's +LEDs status. +The first four bites represent the System's LED status and +the last four bites represent the Shelf-LED’s status. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 5} + + + + acSysFanTraySeverity OBJECT-TYPE + SYNTAX INTEGER { + cleared(0) +, + indeterminate(1) +, + warning(2) +, + minor(3) +, + major(4) +, + critical(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Severity of the whole fan tray according to the current +active alarm in the alarm table: Critical, Major or cleared. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 6} + + + + acSysFanTrayFansConfiguredSpeed OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The fan's configured speed in Tach units (RPM/120). Each Byte +represents a fan. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 7} + + + + acSysFanTrayFansCurrentSpeed OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The fan's mesured speed in Tach units (RPM/120). Each Byte represents +a fan. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 8} + + + + acSysFanTrayFansStatus OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..1)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit field which display the working status of each fan in +the Fan-Tray. +0 - Working +1 - Faulty. +AC INI-Param: N/A" + ::= {acSysFanTrayEntry 9} + + + + -- **************************************** + -- acSysPowerSupply table declaration + -- **************************************** + acSysPowerSupplyTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSystemChassis 23} + + + + -- **************************************** + -- acSysPowerSupply table entry + -- **************************************** + acSysPowerSupplyEntry OBJECT-TYPE + SYNTAX AcSysPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysPowerSupplyIndex} + ::= {acSysPowerSupplyTable 1} + + + + -- **************************************** + -- acSysPowerSupply TABLE + -- **************************************** + AcSysPowerSupplyEntry ::= SEQUENCE { + acSysPowerSupplyIndex Unsigned32, + acSysPowerSupplyGeographicalPosition Unsigned32, + acSysPowerSupplyExistence INTEGER, + acSysPowerSupplyHwversion SnmpAdminString, + acSysPowerSupplyLEDs OCTET STRING, + acSysPowerSupplySeverity INTEGER + } + + + + acSysPowerSupplyIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Power-Supply's index in the system. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 1} + + + + acSysPowerSupplyGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 2} + + + + acSysPowerSupplyExistence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the Power-Supply present or missing. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 3} + + + + acSysPowerSupplyHwversion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PS’s HW version. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 4} + + + + acSysPowerSupplyLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit-field representation of the Power-Supply LEDs' status. +The first four bites represent the Power-Supply LED's status +and the last four bites represent the Fault LED's status. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 5} + + + + acSysPowerSupplySeverity OBJECT-TYPE + SYNTAX INTEGER { + cleared(1) +, + indeterminate(2) +, + warning(3) +, + minor(4) +, + major(5) +, + critical(6) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Severity of the power-supply according to the current active +alarm in the alarm table. +AC INI-Param: N/A" + ::= {acSysPowerSupplyEntry 6} + + + + -- **************************************** + -- acSysPEM table declaration + -- **************************************** + acSysPEMTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysPEMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSystemChassis 24} + + + + -- **************************************** + -- acSysPEM table entry + -- **************************************** + acSysPEMEntry OBJECT-TYPE + SYNTAX AcSysPEMEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysPEMIndex} + ::= {acSysPEMTable 1} + + + + -- **************************************** + -- acSysPEM TABLE + -- **************************************** + AcSysPEMEntry ::= SEQUENCE { + acSysPEMIndex Unsigned32, + acSysPEMGeographicalPosition Unsigned32, + acSysPEMExistence INTEGER, + acSysPEMType SnmpAdminString, + acSysPEMElectricWireConnection INTEGER + } + + + + acSysPEMIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "PEM-Module's index in the system. +AC INI-Param: N/A" + ::= {acSysPEMEntry 1} + + + + acSysPEMGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysPEMEntry 2} + + + + acSysPEMExistence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the PEM-Module present or missing. +AC INI-Param: N/A" + ::= {acSysPEMEntry 3} + + + + acSysPEMType OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PEM’s Type. +AC INI-Param: N/A" + ::= {acSysPEMEntry 4} + + + + acSysPEMElectricWireConnection OBJECT-TYPE + SYNTAX INTEGER { + connected(1) +, + disconnected(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Present the status of the electricity connector located on the +PEM card. +AC INI-Param: N/A" + ::= {acSysPEMEntry 5} + + + + acSysSATModule OBJECT IDENTIFIER ::= {acSystemChassis 25} + + + -- **************************************** + -- acSysSAT table declaration + -- **************************************** + acSysSATTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysSATEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysSATModule 21} + + + + -- **************************************** + -- acSysSAT table entry + -- **************************************** + acSysSATEntry OBJECT-TYPE + SYNTAX AcSysSATEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysSATSatIndex} + ::= {acSysSATTable 1} + + + + -- **************************************** + -- acSysSAT TABLE + -- **************************************** + AcSysSATEntry ::= SEQUENCE { + acSysSATSatIndex Unsigned32, + acSysSATGeographicalPosition Unsigned32, + acSysSATType SnmpAdminString, + acSysSATInitInformation INTEGER, + acSysSATTimingUnitExistence INTEGER, + acSysSATTimingRefSelection INTEGER + } + + + + acSysSATSatIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "SAT-Module's index in the system. +AC INI-Param: N/A" + ::= {acSysSATEntry 1} + + + + acSysSATGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (2..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysSATEntry 2} + + + + acSysSATType OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SAT’s Type. +AC INI-Param: N/A" + ::= {acSysSATEntry 3} + + + + acSysSATInitInformation OBJECT-TYPE + SYNTAX INTEGER { + detected(0) +, + reConfig(1) +, + reConfigTry2(2) +, + reConfigTry3(3) +, + notInitialized(4) +, + initIsMissing(5) +, + initWasReset(6) +, + initFail(7) +, + initInProgress(8) +, + initUpdateREFTable(9) +, + remoteKeepAlive(10) +, + initComplete(11) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Sat's Init Information. +AC INI-Param: N/A" + ::= {acSysSATEntry 4} + + + + acSysSATTimingUnitExistence OBJECT-TYPE + SYNTAX INTEGER { + exist(1) +, + notExist(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the Timig Unit present or missing. +AC INI-Param: N/A" + ::= {acSysSATEntry 5} + + + + acSysSATTimingRefSelection OBJECT-TYPE + SYNTAX INTEGER { + bITSNOREF(0) +, + rEFFromBITSA(1) +, + rEFFromBITSB(2) +, + bITSNOREF1(3) +, + rEFFromLineClock1(4) +, + rEFFromLineClock2(5) +, + rEFFromLineClock3(6) +, + rEFFromLineClock7(7) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "SAT's Timing Reference Selection. +AC INI-Param: N/A" + ::= {acSysSATEntry 6} + + + + -- **************************************** + -- acSysSATFramers table declaration + -- **************************************** + acSysSATFramersTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysSATFramersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysSATModule 22} + + + + -- **************************************** + -- acSysSATFramers table entry + -- **************************************** + acSysSATFramersEntry OBJECT-TYPE + SYNTAX AcSysSATFramersEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysSATFramersSatIndex,acSysSATFramersFramerIndex} + ::= {acSysSATFramersTable 1} + + + + -- **************************************** + -- acSysSATFramers TABLE + -- **************************************** + AcSysSATFramersEntry ::= SEQUENCE { + acSysSATFramersSatIndex Unsigned32, + acSysSATFramersFramerIndex Unsigned32, + acSysSATFramersFramerInterfaceStatus INTEGER, + acSysSATFramersFramerLoopBackRef INTEGER, + acSysSATFramersFramerInterfaceType INTEGER, + acSysSATFramersFramerTransmitControl INTEGER, + acSysSATFramersRxStatus INTEGER, + acSysSATFramersIsUsedAsPLLClock INTEGER + } + + + + acSysSATFramersSatIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "SAT-Module's index in the system. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 1} + + + + acSysSATFramersFramerIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Framer's Index. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 2} + + + + acSysSATFramersFramerInterfaceStatus OBJECT-TYPE + SYNTAX INTEGER { + framerInitialized(0) +, + framerNotInitialized(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Framer Interface Status. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 3} + + + + acSysSATFramersFramerLoopBackRef OBJECT-TYPE + SYNTAX INTEGER { + loopdisable(0) +, + loopenable(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Frame rLoop Back Reference. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 4} + + + + acSysSATFramersFramerInterfaceType OBJECT-TYPE + SYNTAX INTEGER { + e1CRC4(0) +, + e1CAS(1) +, + e1FAS(2) +, + t1D4(3) +, + t1ESF(4) +, + t12(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Framer Interface Type. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 5} + + + + acSysSATFramersFramerTransmitControl OBJECT-TYPE + SYNTAX INTEGER { + systemClock(0) +, + aIS(1) +, + disableTransmit(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Framer Transmit Control. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 6} + + + + acSysSATFramersRxStatus OBJECT-TYPE + SYNTAX INTEGER { + alarmClear(0) +, + lOFAlarm(1) +, + lOSAlarm(2) +, + aISAlarm(3) +, + aISInit(4) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Provides the alarm status of the clock interface. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 7} + + + + acSysSATFramersIsUsedAsPLLClock OBJECT-TYPE + SYNTAX INTEGER { + notUsed(0) +, + used(1) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is Used As PLL Clock indication. +AC INI-Param: N/A" + ::= {acSysSATFramersEntry 8} + + + + acSysTimingModule OBJECT IDENTIFIER ::= {acSystemChassis 26} + + + -- **************************************** + -- acSysPLLStatus table declaration + -- **************************************** + acSysPLLStatusTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysPLLStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + ::= {acSysTimingModule 21} + + + + -- **************************************** + -- acSysPLLStatus table entry + -- **************************************** + acSysPLLStatusEntry OBJECT-TYPE + SYNTAX AcSysPLLStatusEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysPLLStatusIndex} + ::= {acSysPLLStatusTable 1} + + + + -- **************************************** + -- acSysPLLStatus TABLE + -- **************************************** + AcSysPLLStatusEntry ::= SEQUENCE { + acSysPLLStatusIndex Unsigned32, + acSysPLLStatusOperatingMode INTEGER + } + + + + acSysPLLStatusIndex OBJECT-TYPE + SYNTAX Unsigned32 (0..1) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Table's Index. +AC INI-Param: N/A" + ::= {acSysPLLStatusEntry 1} + + + + acSysPLLStatusOperatingMode OBJECT-TYPE + SYNTAX INTEGER { + freeRun(0) +, + lockToRef1(1) +, + lockToRef2(2) +, + lockToLocal(3) +, + holdOver(4) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PLL's Current Operating Mode. +AC INI-Param: N/A" + ::= {acSysPLLStatusEntry 2} + + + + acSystemChassisHA OBJECT IDENTIFIER ::= {acSystemChassis 27} + + + acSystemChassisHADevice1Name OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Define the unit identification name of the first unit of HA +system. +Relevant to M4K and SW-SBC. +Access: Instant. +AC INI-Param: HAUnitIdName" + ::= {acSystemChassisHA 1} + + + + acSystemChassisHADevice2Name OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..128)) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Define the unit identification name of the second unit of HA +system. +Relevant to M4K and SW-SBC. +Access: Instant. +AC INI-Param: HAUnitIdName" + ::= {acSystemChassisHA 2} + + + + acSystemChassisHAActiveDevice OBJECT-TYPE + SYNTAX INTEGER { + notApplicable(0) +, + device1(1) +, + device2(2) +, + standAlone(3) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Specifies the active device. +Relevant to M4K and SW-SBC. +AC INI-Param: N/A" + ::= {acSystemChassisHA 3} + + + + -- **************************************** + -- acSysRedundantModule table declaration + -- **************************************** + acSysRedundantModuleTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysRedundantModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Relevant only to M4K." + ::= {acSystemChassisHA 21} + + + + -- **************************************** + -- acSysRedundantModule table entry + -- **************************************** + acSysRedundantModuleEntry OBJECT-TYPE + SYNTAX AcSysRedundantModuleEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysRedundantModuleIndex} + ::= {acSysRedundantModuleTable 1} + + + + -- **************************************** + -- acSysRedundantModule TABLE + -- **************************************** + AcSysRedundantModuleEntry ::= SEQUENCE { + acSysRedundantModuleIndex Unsigned32, + acSysRedundantModuleGeographicalPosition Unsigned32, + acSysRedundantModuleType INTEGER, + acSysRedundantModulePresence INTEGER, + acSysRedundantModuleLicenseKeyList SnmpAdminString, + acSysRedundantModuleSerialNumber Integer32, + acSysRedundantModuleSWVersion SnmpAdminString, + acSysRedundantModuleOperationalState INTEGER, + acSysRedundantModuleHAStatus INTEGER, + acSysRedundantModuleLEDs OCTET STRING, + acSysRedundantModuleTemperature Integer32, + acSysRedundantModuleActions INTEGER, + acSysRedundantModuleFRUaction INTEGER, + acSysRedundantModuleFRUstatus INTEGER, + acSysRedundantModuleNumOfPorts Unsigned32, + acSysRedundantModuleFirstPortNum Unsigned32 + } + + + + acSysRedundantModuleIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Module number in the system. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 1} + + + + acSysRedundantModuleGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..12) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The CPU slot number of the redundant board. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 2} + + + + acSysRedundantModuleType OBJECT-TYPE + SYNTAX INTEGER { + acUnknown(0) +, + acMediant4000CPUmodule(280) +, + acMediant4000MPModule(295) +, + acMediant2600CPUmodule(308) +, + acMediant2600MPModule(309) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The module's type. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 3} + + + + acSysRedundantModulePresence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the module present or missing. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 4} + + + + acSysRedundantModuleLicenseKeyList OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..1400)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "List of active features as enabled by the license key. SA modules +return NULL. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 5} + + + + acSysRedundantModuleSerialNumber OBJECT-TYPE + SYNTAX Integer32 (-1..2147483647) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The module's serial number. +For 6310 the serial number is the decimal form of the last +5 characters in the MAC Address. + SA modules return 0. + When the modules in the table are unavailable for audit (no +HA) (-1) is returned. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 6} + + + + acSysRedundantModuleSWVersion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The version of the SW being run in the module placed . + SA Modules return NULL. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 7} + + + + acSysRedundantModuleOperationalState OBJECT-TYPE + SYNTAX INTEGER { + disable(1) +, + enable(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The operational state of the module. Determined internally by +the system. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 8} + + + + acSysRedundantModuleHAStatus OBJECT-TYPE + SYNTAX INTEGER { + acitveNonHA(1) +, + active(2) +, + redundant(3) +, + standAlone(4) +, + redundantNonHA(5) +, + notApplicable(6) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Modules status with in the system. Designed to define the HA +state. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 9} + + + + acSysRedundantModuleLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..50)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Bit Field for the LEDs on the front of the module. +LSB in each nibble (half Byte) is 0 - constant, 1 - blinking. +3 MSB are the color - + 0 - none + 1- Green + 2 - Red + 3 - Yellow + 4 - Orange + 5 - Blue + 7 - Gray (unknown). +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 10} + + + + acSysRedundantModuleTemperature OBJECT-TYPE + SYNTAX Integer32 (-1..100) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Temperature of the board in degrees Celsius. SA Modules return +0. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 11} + + + + acSysRedundantModuleActions OBJECT-TYPE + SYNTAX INTEGER { + reset(1) +, + actionDone(3) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Actions to be performed by the module. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 12} + + + + acSysRedundantModuleFRUaction OBJECT-TYPE + SYNTAX INTEGER { + fruActionDone(1) +, + fruOutOfServiceAction(2) +, + fruBackToServiceAction(3) +, + fruNotApplicable(4) + + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Field Replace Unit actions +Relevant to IF-Module only. +Access: Instant. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 13} + + + + acSysRedundantModuleFRUstatus OBJECT-TYPE + SYNTAX INTEGER { + moduleNotExist(1) +, + moduleExistOk(2) +, + moduleOutOfService(3) +, + moduleBackToServiceStart(4) +, + moduleMismatch(5) +, + moduleFaulty(6) +, + notApplicable(7) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Field Replace Unit module's status. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 14} + + + + acSysRedundantModuleNumOfPorts OBJECT-TYPE + SYNTAX Unsigned32 (1..4) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The number of physical interfaces in a module, analog or digital. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 15} + + + + acSysRedundantModuleFirstPortNum OBJECT-TYPE + SYNTAX Unsigned32 (0..19) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The logical number as seen in the general trunk/analog-channel +table of the first port in the module in question. +Since analog and digital ports can be operational at once, +analog and digital ports may have same logical number. +AC INI-Param: N/A" + ::= {acSysRedundantModuleEntry 16} + + + + -- **************************************** + -- acSysRedundantFanTray table declaration + -- **************************************** + acSysRedundantFanTrayTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysRedundantFanTrayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Relevant only to M4K." + ::= {acSystemChassisHA 22} + + + + -- **************************************** + -- acSysRedundantFanTray table entry + -- **************************************** + acSysRedundantFanTrayEntry OBJECT-TYPE + SYNTAX AcSysRedundantFanTrayEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysRedundantFanTrayIndex} + ::= {acSysRedundantFanTrayTable 1} + + + + -- **************************************** + -- acSysRedundantFanTray TABLE + -- **************************************** + AcSysRedundantFanTrayEntry ::= SEQUENCE { + acSysRedundantFanTrayIndex Unsigned32, + acSysRedundantFanTrayGeographicalPosition Unsigned32, + acSysRedundantFanTrayExistence INTEGER, + acSysRedundantFanTrayType SnmpAdminString, + acSysRedundantFanTrayLEDs OCTET STRING, + acSysRedundantFanTraySeverity INTEGER, + acSysRedundantFanTrayFansConfiguredSpeed OCTET STRING, + acSysRedundantFanTrayFansCurrentSpeed OCTET STRING, + acSysRedundantFanTrayFansStatus OCTET STRING + } + + + + acSysRedundantFanTrayIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Fan-Tray's index in the system. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 1} + + + + acSysRedundantFanTrayGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..1) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 2} + + + + acSysRedundantFanTrayExistence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the Fan-Tray present or missing. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 3} + + + + acSysRedundantFanTrayType OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..50)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The type of the Fan-Tray . +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 4} + + + + acSysRedundantFanTrayLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "This object built as a bit-field which represents the Fan-Tray's +LEDs status. +The first four bites represent the System's LED status and +the last four bites represent the Shelf-LED’s status. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 5} + + + + acSysRedundantFanTraySeverity OBJECT-TYPE + SYNTAX INTEGER { + cleared(0) +, + indeterminate(1) +, + warning(2) +, + minor(3) +, + major(4) +, + critical(5) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Severity of the whole fan tray according to the current +active alarm in the alarm table: Critical, Major or cleared. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 6} + + + + acSysRedundantFanTrayFansConfiguredSpeed OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The fan's configured speed in Tach units (RPM/120). Each Byte +represents a fan. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 7} + + + + acSysRedundantFanTrayFansCurrentSpeed OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..8)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The fan's mesured speed in Tach units (RPM/120). Each Byte represents +a fan. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 8} + + + + acSysRedundantFanTrayFansStatus OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..1)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit field which display the working status of each fan in +the Fan-Tray. +0 - Working +1 - Faulty. +AC INI-Param: N/A" + ::= {acSysRedundantFanTrayEntry 9} + + + + -- **************************************** + -- acSysRedundantPowerSupply table declaration + -- **************************************** + acSysRedundantPowerSupplyTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcSysRedundantPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + " Relevant only to M4K." + ::= {acSystemChassisHA 23} + + + + -- **************************************** + -- acSysRedundantPowerSupply table entry + -- **************************************** + acSysRedundantPowerSupplyEntry OBJECT-TYPE + SYNTAX AcSysRedundantPowerSupplyEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "" + INDEX {acSysRedundantPowerSupplyIndex} + ::= {acSysRedundantPowerSupplyTable 1} + + + + -- **************************************** + -- acSysRedundantPowerSupply TABLE + -- **************************************** + AcSysRedundantPowerSupplyEntry ::= SEQUENCE { + acSysRedundantPowerSupplyIndex Unsigned32, + acSysRedundantPowerSupplyGeographicalPosition Unsigned32, + acSysRedundantPowerSupplyExistence INTEGER, + acSysRedundantPowerSupplyHwversion SnmpAdminString, + acSysRedundantPowerSupplyLEDs OCTET STRING, + acSysRedundantPowerSupplySeverity INTEGER + } + + + + acSysRedundantPowerSupplyIndex OBJECT-TYPE + SYNTAX Unsigned32 (1..2147483647) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Power-Supply's index in the system. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 1} + + + + acSysRedundantPowerSupplyGeographicalPosition OBJECT-TYPE + SYNTAX Unsigned32 (1..2) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The slot number in the chassis. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 2} + + + + acSysRedundantPowerSupplyExistence OBJECT-TYPE + SYNTAX INTEGER { + present(1) +, + missing(2) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "Is the Power-Supply present or missing. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 3} + + + + acSysRedundantPowerSupplyHwversion OBJECT-TYPE + SYNTAX SnmpAdminString (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "PS’s HW version. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 4} + + + + acSysRedundantPowerSupplyLEDs OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..20)) + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "A bit-field representation of the Power-Supply LEDs' status. +The first four bites represent the Power-Supply LED's status +and the last four bites represent the Fault LED's status. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 5} + + + + acSysRedundantPowerSupplySeverity OBJECT-TYPE + SYNTAX INTEGER { + cleared(1) +, + indeterminate(2) +, + warning(3) +, + minor(4) +, + major(5) +, + critical(6) + + } + MAX-ACCESS read-only + STATUS current + DESCRIPTION + "The Severity of the power-supply according to the current active +alarm in the alarm table. +AC INI-Param: N/A" + ::= {acSysRedundantPowerSupplyEntry 6} + + + + + +END -- cgit v1.2.3