From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/accedian/ACD-SMAP-MIB | 466 +++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 466 insertions(+) create mode 100644 MIBS/accedian/ACD-SMAP-MIB (limited to 'MIBS/accedian/ACD-SMAP-MIB') diff --git a/MIBS/accedian/ACD-SMAP-MIB b/MIBS/accedian/ACD-SMAP-MIB new file mode 100644 index 0000000..09ac718 --- /dev/null +++ b/MIBS/accedian/ACD-SMAP-MIB @@ -0,0 +1,466 @@ +-- +-- Accedian Enterprise Specific MIB +-- +-- Copyright (c) 2005-2008, Accedian Networks, Inc. +-- All rights reserved. +-- +-- The contents of this document are subject to change without notice. +-- + + +ACD-SMAP-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-TYPE, + Unsigned32 + FROM SNMPv2-SMI + DisplayString, TruthValue, RowStatus + FROM SNMPv2-TC + MODULE-COMPLIANCE, OBJECT-GROUP + FROM SNMPv2-CONF + + acdMibs + FROM ACCEDIAN-SMI; + +acdSmap MODULE-IDENTITY + + LAST-UPDATED "200810010100Z" + ORGANIZATION "Accedian Networks, Inc." + CONTACT-INFO + "Accedian Technical Assistance Center + Accedian Networks, Inc. + 4878 Levy, suite 202 + Saint-Laurent, Quebec Canada H4R 2P1 + E-mail: support@accedian.com" + DESCRIPTION + "The Service mapping database for this Accedian Networks device." + + REVISION "200810010100Z" -- 1 October 2008 + DESCRIPTION + "Definition revision." + + REVISION "200806150100Z" -- 15 June 2008 + DESCRIPTION + "Initial version of MIB module ACD-SMAP-MIB." + + ::= { acdMibs 8 } + +acdSmapNotifications OBJECT IDENTIFIER ::= { acdSmap 0 } +acdSmapMIBObjects OBJECT IDENTIFIER ::= { acdSmap 1 } +acdSmapConformance OBJECT IDENTIFIER ::= { acdSmap 2 } + +acdSmapConfig OBJECT IDENTIFIER ::= { acdSmapMIBObjects 1 } + +--------------------------------------------------------------------------- + -- The CoS Profile configuration table + -- This table contains all CoS Profile entry configurations. +--------------------------------------------------------------------------- + +acdSmapCoSProfTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSmapCoSProfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The CoS profile table. Each row in the table represents a CoS Profile. + A CoS profile is used to map an input packet to an L2 class of service. + This traffic mapping (classification) is accomplished using one of + the following fields in the incoming packet: + + p-bits in 802.1Q / 802.1Q-in-Q tags + IP precedence bits in IPv4 TOS byte + DSCP bits in IPv4 DSCP byte + + The class of service value (0-7) assigned to the outgoing traffic is + selected based on the conformance level (Green/Yellow) of the incoming + traffic. The following sections describe the general configuration + parameters and the mapping table of a CoS profile." + ::= { acdSmapConfig 1 } + +acdSmapCoSProfEntry OBJECT-TYPE + SYNTAX AcdSmapCoSProfEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings to manage a CoS profile." + INDEX { acdSmapCoSProfID } + ::= { acdSmapCoSProfTable 1 } + +AcdSmapCoSProfEntry ::= SEQUENCE { + acdSmapCoSProfID Unsigned32, + acdSmapCoSProfRowStatus RowStatus, + acdSmapCoSProfName DisplayString, + acdSmapCoSProfType INTEGER, + acdSmapCoSProfDecodeDropBit TruthValue, + acdSmapCoSProfEncodeDropBit TruthValue +} + +acdSmapCoSProfID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each CoS Profile instance." + ::= { acdSmapCoSProfEntry 1 } + +acdSmapCoSProfRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "All columns must have a valid value before a row can be activated. To + create a new CoS Profile you shall provide the a unique name and the + type for an empty row with the RowStatus set to Create and Go. To + delete the CoS Profile you need to set the RowStatus to destroy." + ::= { acdSmapCoSProfEntry 2 } + +acdSmapCoSProfName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is a string to uniquely identify the CoS profile." + ::= { acdSmapCoSProfEntry 3 } + +acdSmapCoSProfType OBJECT-TYPE + SYNTAX INTEGER { + pcp(1), + dscp(2), + pre(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the type of CoS profile. Possible values are: PCP, IP + precedence or DSCP." + ::= { acdSmapCoSProfEntry 4 } + +acdSmapCoSProfDecodeDropBit OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This field is only valid for PCP CoS profiles. If this field is set, + the pre-marking color is decoded from the DEI bit (Drop Eligible + Indication). Otherwise, the user defined pre-color is used." + DEFVAL { false } + ::= { acdSmapCoSProfEntry 5 } + +acdSmapCoSProfEncodeDropBit OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This field controls the DEI bit in an S-VLAN tag. If this field is set + and the outgoing packet is marked yellow then the DEI bit is set to 1. + Otherwise, the DEI is set to 0." + DEFVAL { false } + ::= { acdSmapCoSProfEntry 6 } + +--------------------------------------------------------------------------- + -- The CoS Profile Code Point configuration table + -- This table contains all Code Point for a CoS profile entry. +--------------------------------------------------------------------------- + +acdSmapCoSProfCodePointTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSmapCoSProfCodePointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Configuration table of all code point entries. Each row in the + table represents a Code point. the number of code points depend of the + acdSmapCoSProfType value. + + p-bits in 802.1Q / 802.1Q-in-Q tags + IP precedence bits in IPv4 TOS byte + DSCP bits in IPv4 DSCP byte + + The class of service value (0-7) assigned to the outgoing traffic is + selected based on the conformance level (Green/Yellow) of the incoming + traffic." + ::= { acdSmapConfig 2 } + +acdSmapCoSProfCodePointEntry OBJECT-TYPE + SYNTAX AcdSmapCoSProfCodePointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings for a code point." + INDEX { acdSmapCoSProfID, acdSmapCoSProfCodePointID } + ::= { acdSmapCoSProfCodePointTable 1 } + +AcdSmapCoSProfCodePointEntry ::= SEQUENCE { + acdSmapCoSProfCodePointID Unsigned32, + acdSmapCoSProfCodePointPreMarkingColor INTEGER, + acdSmapCoSProfCodePointGreenOut Unsigned32, + acdSmapCoSProfCodePointYellowOut Unsigned32 +} + +acdSmapCoSProfCodePointID OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each row. Base on Code Point, 0 to 63 for DSCP or 0 + to 7 for PCP or IP precedence." + ::= { acdSmapCoSProfCodePointEntry 1 } + +acdSmapCoSProfCodePointPreMarkingColor OBJECT-TYPE + SYNTAX INTEGER { + green(1), + yellow(2) + } + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "This is the user pre-color to mark the incoming traffic. This field + is only valid if acdSmapCoSProfDecodeDropBit is not set." + DEFVAL { green } + ::= { acdSmapCoSProfCodePointEntry 2 } + +acdSmapCoSProfCodePointGreenOut OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The class of service value that will be used in the outgoing green + packets. This value is selected if the result of the bandwidth + regulator assigned to this entry is green or if the pre-marking + color is green and no bandwidth regulator is assigned to this entry." + DEFVAL { 0 } + ::= { acdSmapCoSProfCodePointEntry 3 } + +acdSmapCoSProfCodePointYellowOut OBJECT-TYPE + SYNTAX Unsigned32 (0..7) + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The class of service value that will be used in the outgoing yellow + packets. This value is selected if the result of the bandwidth + regulator assigned to this entry is yellow or if the pre-marking + color is yellow and no bandwidth regulator is assigned to this entry." + DEFVAL { 0 } + ::= { acdSmapCoSProfCodePointEntry 4 } + +--------------------------------------------------------------------------- + -- The Regulator Set configuration table + -- This table contains all Regulator Set entry configurations. +--------------------------------------------------------------------------- + +acdSmapRegSetTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSmapRegSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Regulator Set profile table. Each row in the table represents a + Regulator Set. A bandwidth regulator set allows the user to regulate + traffic based on the following information: + + p-bits in 802.1Q / 802.1Q-in-Q tags + IP precedence bits in IPv4 TOS byte + DSCP bits in IPv4 DSCP byte. + " + ::= { acdSmapConfig 3 } + +acdSmapRegSetEntry OBJECT-TYPE + SYNTAX AcdSmapRegSetEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings to manage a Regulator set." + INDEX { acdSmapRegSetID } + ::= { acdSmapRegSetTable 1 } + +AcdSmapRegSetEntry ::= SEQUENCE { + acdSmapRegSetID Unsigned32, + acdSmapRegSetRowStatus RowStatus, + acdSmapRegSetName DisplayString, + acdSmapRegSetType INTEGER +} + +acdSmapRegSetID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each Regulator set instance." + ::= { acdSmapRegSetEntry 1 } + +acdSmapRegSetRowStatus OBJECT-TYPE + SYNTAX RowStatus + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "All columns must have a valid value before a row can be activated. To + create a new Regulator set you shall provide the a unique name and the + type for an empty row with the RowStatus set to Create and Go. To + delete the CoS Profile you need to set the RowStatus to destroy." + ::= { acdSmapRegSetEntry 2 } + +acdSmapRegSetName OBJECT-TYPE + SYNTAX DisplayString (SIZE (1..31)) + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "This is a string to uniquely identify the Regulator set." + ::= { acdSmapRegSetEntry 3 } + +acdSmapRegSetType OBJECT-TYPE + SYNTAX INTEGER { + pcp(1), + dscp(2), + pre(3) + } + MAX-ACCESS read-create + STATUS current + DESCRIPTION + "Indicates the type of Regulator Set. Possible values are: PCP, IP + precedence or DSCP." + ::= { acdSmapRegSetEntry 4 } + +--------------------------------------------------------------------------- + -- The Regulator Set Code Point configuration table + -- This table contains all Code Point for a Regulator set profile entry. +--------------------------------------------------------------------------- + +acdSmapRegSetCodePointTable OBJECT-TYPE + SYNTAX SEQUENCE OF AcdSmapRegSetCodePointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "The Configuration table of all code point entries. Each row in the + table represents a Code point. the number of code points depend of the + acdSmapCoSProfType value. + + p-bits in 802.1Q / 802.1Q-in-Q tags; + IP precedence bits in IPv4 TOS byte; + DSCP bits in IPv4 DSCP byte. + " + ::= { acdSmapConfig 4 } + +acdSmapRegSetCodePointEntry OBJECT-TYPE + SYNTAX AcdSmapRegSetCodePointEntry + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "An entry consisting of all settings for a code point." + INDEX { acdSmapRegSetID, acdSmapRegSetCodePointID } + ::= { acdSmapRegSetCodePointTable 1 } + +AcdSmapRegSetCodePointEntry ::= SEQUENCE { + acdSmapRegSetCodePointID Unsigned32, + acdSmapRegSetCodePointRegulatorID Unsigned32, + acdSmapRegSetCodePointRegulatorEnable TruthValue +} + +acdSmapRegSetCodePointID OBJECT-TYPE + SYNTAX Unsigned32 (0..63) + MAX-ACCESS not-accessible + STATUS current + DESCRIPTION + "Unique value for each row. Base on Code Point, 0 to 64 for DSCP or 0 + to 7 for PCP or IP precedence." + ::= { acdSmapRegSetCodePointEntry 1 } + + +acdSmapRegSetCodePointRegulatorID OBJECT-TYPE + SYNTAX Unsigned32 + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "The bandwidth regulator that will be used to regulate the traffic flow + that has this PCP/IP precendence/DSCP value. Refer to acdRegulatorTable + to find the exact identifier (same as acdRegulatorID)." + DEFVAL { 0 } + ::= { acdSmapRegSetCodePointEntry 2 } + +acdSmapRegSetCodePointRegulatorEnable OBJECT-TYPE + SYNTAX TruthValue + MAX-ACCESS read-write + STATUS current + DESCRIPTION + "Enable or disable traffic regulation for this PCP, IP precedence or + DSCP value." + DEFVAL { false } + ::= { acdSmapRegSetCodePointEntry 3 } + +--------------------------------------------------------------------------- + -- ACD-SMAP-MIB Module - Conformance Information +--------------------------------------------------------------------------- + +acdSmapCompliances OBJECT IDENTIFIER ::= { acdSmapConformance 1 } +acdSmapGroups OBJECT IDENTIFIER ::= { acdSmapConformance 2 } + +--------------------------------------------------------------------------- + -- Units of conformance +--------------------------------------------------------------------------- + +acdSmapCoSProfGroup OBJECT-GROUP + OBJECTS { + acdSmapCoSProfRowStatus, + acdSmapCoSProfName, + acdSmapCoSProfType, + acdSmapCoSProfDecodeDropBit, + acdSmapCoSProfEncodeDropBit + } + STATUS current + DESCRIPTION + "Objects for the CoS profile Group." + ::= { acdSmapGroups 1 } + +acdSmapCoSProfCodePointGroup OBJECT-GROUP + OBJECTS { + acdSmapCoSProfCodePointPreMarkingColor, + acdSmapCoSProfCodePointGreenOut, + acdSmapCoSProfCodePointYellowOut + } + STATUS current + DESCRIPTION + "Objects for the CoS profile CodePoint Group." + ::= { acdSmapGroups 2 } + +acdSmapRegSetGroup OBJECT-GROUP + OBJECTS { + acdSmapRegSetRowStatus, + acdSmapRegSetName, + acdSmapRegSetType + } + STATUS current + DESCRIPTION + "Objects for the Regulator Set Group." + ::= { acdSmapGroups 3 } + +acdSmapRegSetCodePointGroup OBJECT-GROUP + OBJECTS { + acdSmapRegSetCodePointRegulatorID, + acdSmapRegSetCodePointRegulatorEnable + } + STATUS current + DESCRIPTION + "Objects for the Regulator Set CodePoint Group." + ::= { acdSmapGroups 4 } + +acdSmapCompliance MODULE-COMPLIANCE + STATUS current + DESCRIPTION + "The compliance statement for support of the ACD-SMAP-MIB module." + MODULE + MANDATORY-GROUPS { + acdSmapCoSProfGroup, + acdSmapCoSProfCodePointGroup, + acdSmapRegSetGroup, + acdSmapRegSetCodePointGroup + } + + OBJECT acdSmapCoSProfRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION "Support for createAndWait is not required." + + OBJECT acdSmapRegSetRowStatus + SYNTAX RowStatus { active(1) } + WRITE-SYNTAX RowStatus { createAndGo(4), destroy(6) } + DESCRIPTION "Support for createAndWait is not required." + + ::= { acdSmapCompliances 1 } + +END -- cgit v1.2.3