From 98a672123c7872f6b9b75a9a2b6bb3aea504de6a Mon Sep 17 00:00:00 2001 From: David Leutgeb Date: Tue, 5 Dec 2023 12:25:34 +0100 Subject: Initial commit --- MIBS/ADSL2-LINE-TC-MIB | 728 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 728 insertions(+) create mode 100644 MIBS/ADSL2-LINE-TC-MIB (limited to 'MIBS/ADSL2-LINE-TC-MIB') diff --git a/MIBS/ADSL2-LINE-TC-MIB b/MIBS/ADSL2-LINE-TC-MIB new file mode 100644 index 0000000..19681fc --- /dev/null +++ b/MIBS/ADSL2-LINE-TC-MIB @@ -0,0 +1,728 @@ +ADSL2-LINE-TC-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, + transmission + FROM SNMPv2-SMI + TEXTUAL-CONVENTION + FROM SNMPv2-TC; + + +adsl2TCMIB MODULE-IDENTITY + LAST-UPDATED "200610040000Z" + ORGANIZATION "ADSLMIB Working Group" + CONTACT-INFO + "WG-email: adslmib@ietf.org + Info: https://www1.ietf.org/mailman/listinfo/adslmib + + Chair: Mike Sneed + Sand Channel Systems + Postal: P.O. Box 37324 + Raleigh NC 27627-732 + Email: sneedmike@hotmail.com + Phone: +1 206 600 7022 + + Co-Chair & Co-editor: + Menachem Dodge + ECI Telecom Ltd. + Postal: 30 Hasivim St. + Petach Tikva 49517, + Israel. + Email: mbdodge@ieee.org + Phone: +972 3 926 8421 + Co-editor: Moti Morgenstern + ECI Telecom Ltd. + Postal: 30 Hasivim St. + Petach Tikva 49517, + Israel. + Email: moti.morgenstern@ecitele.com + Phone: +972 3 926 6258 + + Co-editor: Scott Baillie + NEC Australia + Postal: 649-655 Springvale Road, + Mulgrave, Victoria 3170, + Australia. + Email: scott.baillie@nec.com.au + Phone: +61 3 9264 3986 + + Co-editor: Umberto Bonollo + NEC Australia + Postal: 649-655 Springvale Road, + Mulgrave, Victoria 3170, + Australia. + Email: umberto.bonollo@nec.com.au + Phone: +61 3 9264 3385" + DESCRIPTION + "This MIB Module provides Textual Conventions to be + used by the ADSL2-LINE-MIB module for the purpose of + managing ADSL, ADSL2, and ADSL2+ lines. + + Copyright (C) The Internet Society (2006). This version of + this MIB module is part of RFC 4706: see the RFC itself for + full legal notices." + REVISION "200610040000Z" + DESCRIPTION + "Initial version, published as RFC 4706." + ::= { transmission 238 2 } + + + +-- adsl2MIB 2 +-- +-- ---------------------------------------------- +-- Textual Conventions -- +-- ---------------------------------------------- + +Adsl2Unit ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies a transceiver as being either an ATU-C or + an ATU-R. An ADSL line consists of two transceivers, an ATU-C + and an ATU-R. Attributes with this syntax reference the two + sides of a line. Specified as an INTEGER, the two values + are: + + atuc(1) -- Central office ADSL terminal unit (ATU-C). + atur(2) -- Remote ADSL terminal unit (ATU-R)." + SYNTAX INTEGER { + atuc(1), + atur(2) + } + +Adsl2Direction ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Identifies the direction of a band as being + either upstream or downstream. Specified as an INTEGER, + the two values are: + upstream(1), and + downstream(2)." + SYNTAX INTEGER { + upstream(1), + downstream(2) + } + +Adsl2TransmissionModeType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A set of ADSL2 line transmission modes, with one bit + per mode. The notes (F) and (L) denote Full-Rate + and Lite/splitterless, respectively: + Bit 00 : Regional Std. (ANSI T1.413) (F) + Bit 01 : Regional Std. (ETSI DTS/TM06006) (F) + Bit 02 : G.992.1 POTS non-overlapped (F) + Bit 03 : G.992.1 POTS overlapped (F) + Bit 04 : G.992.1 ISDN non-overlapped (F) + Bit 05 : G.992.1 ISDN overlapped (F) + Bit 06 : G.992.1 TCM-ISDN non-overlapped (F) + Bit 07 : G.992.1 TCM-ISDN overlapped (F) + Bit 08 : G.992.2 POTS non-overlapped (L) + Bit 09 : G.992.2 POTS overlapped (L) + Bit 10 : G.992.2 with TCM-ISDN non-overlapped (L) + Bit 11 : G.992.2 with TCM-ISDN overlapped (L) + Bit 12 : G.992.1 TCM-ISDN symmetric (F) -- not in G.997.1 + Bit 13-17: Reserved + Bit 18 : G.992.3 POTS non-overlapped (F) + Bit 19 : G.992.3 POTS overlapped (F) + Bit 20 : G.992.3 ISDN non-overlapped (F) + Bit 21 : G.992.3 ISDN overlapped (F) + Bit 22-23: Reserved + Bit 24 : G.992.4 POTS non-overlapped (L) + Bit 25 : G.992.4 POTS overlapped (L) + Bit 26-27: Reserved + Bit 28 : G.992.3 Annex I All-Digital non-overlapped (F) + Bit 29 : G.992.3 Annex I All-Digital overlapped (F) + Bit 30 : G.992.3 Annex J All-Digital non-overlapped (F) + Bit 31 : G.992.3 Annex J All-Digital overlapped (F) + Bit 32 : G.992.4 Annex I All-Digital non-overlapped (L) + Bit 33 : G.992.4 Annex I All-Digital overlapped (L) + Bit 34 : G.992.3 Annex L POTS non-overlapped, mode 1, + wide U/S (F) + Bit 35 : G.992.3 Annex L POTS non-overlapped, mode 2, + narrow U/S(F) + Bit 36 : G.992.3 Annex L POTS overlapped, mode 3, + wide U/S (F) + Bit 37 : G.992.3 Annex L POTS overlapped, mode 4, + narrow U/S (F) + Bit 38 : G.992.3 Annex M POTS non-overlapped (F) + Bit 39 : G.992.3 Annex M POTS overlapped (F) + Bit 40 : G.992.5 POTS non-overlapped (F) + Bit 41 : G.992.5 POTS overlapped (F) + Bit 42 : G.992.5 ISDN non-overlapped (F) + Bit 43 : G.992.5 ISDN overlapped (F) + Bit 44-45: Reserved + Bit 46 : G.992.5 Annex I All-Digital non-overlapped (F) + Bit 47 : G.992.5 Annex I All-Digital overlapped (F) + Bit 48 : G.992.5 Annex J All-Digital non-overlapped (F) + Bit 49 : G.992.5 Annex J All-Digital overlapped (F) + Bit 50 : G.992.5 Annex M POTS non-overlapped (F) + Bit 51 : G.992.5 Annex M POTS overlapped (F) + Bit 52-55: Reserved" + SYNTAX BITS { + ansit1413(0), + etsi(1), + g9921PotsNonOverlapped(2), + g9921PotsOverlapped(3), + g9921IsdnNonOverlapped(4), + g9921isdnOverlapped(5), + g9921tcmIsdnNonOverlapped(6), + g9921tcmIsdnOverlapped(7), + g9922potsNonOverlapped(8), + g9922potsOverlapped(9), + g9922tcmIsdnNonOverlapped(10), + g9922tcmIsdnOverlapped(11), + g9921tcmIsdnSymmetric(12), + reserved1(13), + reserved2(14), + reserved3(15), + reserved4(16), + reserved5(17), + g9923PotsNonOverlapped(18), + g9923PotsOverlapped(19), + g9923IsdnNonOverlapped(20), + g9923isdnOverlapped(21), + reserved6(22), + reserved7(23), + g9924potsNonOverlapped(24), + g9924potsOverlapped(25), + reserved8(26), + reserved9(27), + g9923AnnexIAllDigNonOverlapped(28), + g9923AnnexIAllDigOverlapped(29), + g9923AnnexJAllDigNonOverlapped(30), + g9923AnnexJAllDigOverlapped(31), + g9924AnnexIAllDigNonOverlapped(32), + g9924AnnexIAllDigOverlapped(33), + g9923AnnexLMode1NonOverlapped(34), + g9923AnnexLMode2NonOverlapped(35), + g9923AnnexLMode3Overlapped(36), + g9923AnnexLMode4Overlapped(37), + g9923AnnexMPotsNonOverlapped(38), + g9923AnnexMPotsOverlapped(39), + g9925PotsNonOverlapped(40), + g9925PotsOverlapped(41), + g9925IsdnNonOverlapped(42), + g9925isdnOverlapped(43), + reserved10(44), + reserved11(45), + g9925AnnexIAllDigNonOverlapped(46), + g9925AnnexIAllDigOverlapped(47), + g9925AnnexJAllDigNonOverlapped(48), + g9925AnnexJAllDigOverlapped(49), + g9925AnnexMPotsNonOverlapped(50), + g9925AnnexMPotsOverlapped(51), + reserved12(52), + reserved13(53), + reserved14(54), + reserved15(55) + } + +Adsl2RaMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specifies the rate adaptation behavior for the line. + The three possible behaviors are: + manual(1) - No Rate-Adaptation. The initialization + process attempts to synchronize to a + specified rate. + raInit(2) - Rate-Adaptation during initialization process + only, which attempts to synchronize to a rate + between minimum and maximum specified values. + dynamicRa(3) - Dynamic Rate-Adaptation during initialization + process as well as during SHOWTIME." + SYNTAX INTEGER { + manual(1), + raInit(2), + dynamicRa(3) + } + +Adsl2InitResult ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Specifies the result of a full initialization attempt; the + six possible result values are: + noFail(0) - Successful initialization. + configError(1) - Configuration failure. + configNotFeasible(2) - Configuration details not supported. + commFail(3) - Communication failure. + noPeerAtu(4) - Peer ATU not detected. + otherCause(5) - Other initialization failure reason. + + The values used are as defined in ITU-T G.997.1, + paragraph 7.5.1.3" + SYNTAX INTEGER { + noFail(0), + configError(1), + configNotFeasible(2), + commFail(3), + noPeerAtu(4), + otherCause(5) + } + +Adsl2OperationModes ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "The ADSL2 management model specified includes an ADSL Mode + attribute that identifies an instance of ADSL Mode-Specific + PSD Configuration object in the ADSL Line Profile. The + following classes of ADSL operating mode are defined. + The notes (F) and (L) denote Full-Rate and Lite/splitterless + respectively: + + +-------+--------------------------------------------------+ + | Value | ADSL operation mode description | + +-------+--------------------------------------------------+ + + 1 - The default/generic PSD configuration. Default + configuration will be used when no other matching + mode-specific configuration can be found. + 2 - ADSL family. The attributes included in the Mode- + Specific PSD Configuration are irrelevant for + ITU-T G.992.1 and G.992.2 ADSL modes. Hence, it + is possible to map those modes to this generic + class. + 3-7 - Unused. Reserved for future ITU-T specification. + 8 - G.992.3 POTS non-overlapped (F) + 9 - G.992.3 POTS overlapped (F) + 10 - G.992.3 ISDN non-overlapped (F) + 11 - G.992.3 ISDN overlapped (F) + 12-13 - Unused. Reserved for future ITU-T specification. + 14 - G.992.4 POTS non-overlapped (L) + 15 - G.992.4 POTS overlapped (L) + 16-17 - Unused. Reserved for future ITU-T specification. + 18 - G.992.3 Annex I All-Digital non-overlapped (F) + 19 - G.992.3 Annex I All-Digital overlapped (F) + 20 - G.992.3 Annex J All-Digital non-overlapped (F) + 21 - G.992.3 Annex J All-Digital overlapped (F) + 22 - G.992.4 Annex I All-Digital non-overlapped (L) + 23 - G.992.4 Annex I All-Digital overlapped (L) + 24 - G.992.3 Annex L POTS non-overlapped, mode 1, + wide U/S (F) + 25 - G.992.3 Annex L POTS non-overlapped, mode 2, + narrow U/S(F) + 26 - G.992.3 Annex L POTS overlapped, mode 3, + wide U/S (F) + 27 - G.992.3 Annex L POTS overlapped, mode 4, + narrow U/S (F) + 28 - G.992.3 Annex M POTS non-overlapped (F) + 29 - G.992.3 Annex M POTS overlapped (F) + 30 - G.992.5 POTS non-overlapped (F) + 31 - G.992.5 POTS overlapped (F) + 32 - G.992.5 ISDN non-overlapped (F) + 33 - G.992.5 ISDN overlapped (F) + 34-35 - Unused. Reserved for future ITU-T specification. + 36 - G.992.5 Annex I All-Digital non-overlapped (F) + 37 - G.992.5 Annex I All-Digital overlapped (F) + 38 - G.992.5 Annex J All-Digital non-overlapped (F) + 39 - G.992.5 Annex J All-Digital overlapped (F) + 40 - G.992.5 Annex M POTS non-overlapped (F) + 41 - G.992.5 Annex M POTS overlapped (F)" + SYNTAX INTEGER { + defMode(1), + adsl(2), + g9923PotsNonOverlapped(8), + g9923PotsOverlapped(9), + g9923IsdnNonOverlapped(10), + g9923isdnOverlapped(11), + g9924potsNonOverlapped(14), + g9924potsOverlapped(15), + g9923AnnexIAllDigNonOverlapped(18), + g9923AnnexIAllDigOverlapped(19), + g9923AnnexJAllDigNonOverlapped(20), + g9923AnnexJAllDigOverlapped(21), + g9924AnnexIAllDigNonOverlapped(22), + g9924AnnexIAllDigOverlapped(23), + g9923AnnexLMode1NonOverlapped(24), + g9923AnnexLMode2NonOverlapped(25), + g9923AnnexLMode3Overlapped(26), + g9923AnnexLMode4Overlapped(27), + g9923AnnexMPotsNonOverlapped(28), + g9923AnnexMPotsOverlapped(29), + g9925PotsNonOverlapped(30), + g9925PotsOverlapped(31), + g9925IsdnNonOverlapped(32), + g9925isdnOverlapped(33), + g9925AnnexIAllDigNonOverlapped(36), + g9925AnnexIAllDigOverlapped(37), + g9925AnnexJAllDigNonOverlapped(38), + g9925AnnexJAllDigOverlapped(39), + g9925AnnexMPotsNonOverlapped(40), + g9925AnnexMPotsOverlapped(41) + } + +Adsl2PowerMngState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax uniquely identify each power + management state defined for the ADSL/ADSL2 or ADSL2+ link. + The possible values are: + l0(1) - L0 - Full power management state. + l1(2) - L1 - Low power management state (for G.992.2). + l2(3) - L2 - Low power management state (for G.992.3, + G.992.4, and G.992.5). + l3(4) - L3 - Idle power management state." + SYNTAX INTEGER { + l0(1), + l1(2), + l2(3), + l3(4) + } + +Adsl2ConfPmsForce ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are configuration parameters + that reference the desired power management state for the + ADSL/ADSL2 or ADSL2+ link: + l3toL0(0) - Perform a transition from L3 to L0 + (Full power management state). + l0toL2(2) - Perform a transition from L0 to L2 + (Low power management state). + l0orL2toL3(3) - Perform a transition into L3 (Idle + power management state). + + The values used are as defined in ITU-T G.997.1, + paragraph 7.3.1.1.3" + SYNTAX INTEGER { + l3toL0(0), + l0toL2(2), + l0orL2toL3(3) + } + +Adsl2LConfProfPmMode ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are configuration parameters + that reference the power modes/states into which the ATU-C or + ATU-R may autonomously transit. + + It is a BITS structure that allows control of the following + transit options: + allowTransitionsToIdle(0) - XTU may autonomously transit + to idle (L3) state. + allowTransitionsToLowPower(1) - XTU may autonomously transit + to low-power (L2) state." + SYNTAX BITS { + allowTransitionsToIdle(0), + allowTransitionsToLowPower(1) + } + +Adsl2LineLdsf ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are configuration parameters + that control the Loop Diagnostic mode for the ADSL/ADSL2 or + ADSL2+ link. The possible values are: + inhibit(0) - Inhibit Loop Diagnostic mode. + force(1) - Force/Initiate Loop Diagnostic mode. + + The values used are as defined in ITU-T G.997.1, + paragraph 7.3.1.1.8" + SYNTAX INTEGER { + inhibit(0), + force(1) + } + +Adsl2LdsfResult ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Possible failure reasons associated with performing + a Dual Ended Loop Test (DELT) on a DSL line. + Possible values are: + none(1) - The default value in case LDSF was never + requested for the associated line. + success(2) - The recent command completed + successfully. + inProgress(3) - The Loop Diagnostics process is in + progress. + unsupported(4) - The NE or the line card doesn't support + LDSF. + cannotRun(5) - The NE cannot initiate the command, due + to a nonspecific reason. + aborted(6) - The Loop Diagnostics process aborted. + failed(7) - The Loop Diagnostics process failed. + illegalMode(8) - The NE cannot initiate the command, due + to the specific mode of the relevant + line. + adminUp(9) - The NE cannot initiate the command, as + the relevant line is administratively + 'Up'. + tableFull(10) - The NE cannot initiate the command, due + to reaching the maximum number of rows + in the results table. + noResources(11) - The NE cannot initiate the command, due + to lack of internal memory resources." + SYNTAX INTEGER { + none(1), + success(2), + inProgress(3), + unsupported(4), + cannotRun(5), + aborted(6), + failed(7), + illegalMode(8), + adminUp(9), + tableFull(10), + noResources(11) + } + +Adsl2SymbolProtection ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are configuration parameters + that reference the minimum-length impulse noise protection + (INP) in terms of number of symbols. The possible values are: + noProtection (i.e., INP not required), halfSymbol (i.e., INP + length is 1/2 symbol), and 1-16 symbols in steps of 1 symbol." + SYNTAX INTEGER { + noProtection(1), + halfSymbol(2), + singleSymbol(3), + twoSymbols(4), + threeSymbols(5), + fourSymbols(6), + fiveSymbols(7), + sixSymbols(8), + sevenSymbols(9), + eightSymbols(10), + nineSymbols(11), + tenSymbols(12), + elevenSymbols(13), + twelveSymbols(14), + thirteeSymbols(15), + fourteenSymbols(16), + fifteenSymbols(17), + sixteenSymbols(18) + } + +Adsl2MaxBer ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are configuration parameters + that reference the maximum Bit Error Rate (BER). + The possible values are: + + eminus3(1) - Maximum BER=E^-3 + eminus5(2) - Maximum BER=E^-5 + eminus7(3) - Maximum BER=E^-7" + SYNTAX INTEGER { + eminus3(1), + eminus5(2), + eminus7(3) + } + +Adsl2ScMaskDs ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each one of the 512 bits in this OCTET + STRING array represents the corresponding bin + in the downstream direction. A value of one + indicates that the bin is not in use." + SYNTAX OCTET STRING (SIZE (0..64)) + +Adsl2ScMaskUs ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each one of the 64 bits in this OCTET + STRING array represents the corresponding bin + in the upstream direction. A value of one + indicates that the bin is not in use." + SYNTAX OCTET STRING (SIZE (0..8)) + +Adsl2RfiDs ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Each one of the 512 bits in this OCTET + STRING array represents the corresponding bin + in the downstream direction. A value of one + indicates that the bin is part of a notch + filter." + SYNTAX OCTET STRING (SIZE (0..64)) + +Adsl2PsdMaskDs ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is a structure that represents up to + 32 PSD Mask breakpoints. + Each breakpoint occupies 3 octets: The first + two octets hold the index of the sub-carrier + associated with the breakpoint. The third octet + holds the PSD reduction at the breakpoint from 0 + (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of + 0.5 dBm/Hz." + SYNTAX OCTET STRING (SIZE (0..96)) + +Adsl2PsdMaskUs ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is a structure that represents up to + 4 PSD Mask breakpoints. + Each breakpoint occupies 3 octets: The first + two octets hold the index of the sub-carrier + associated with the breakpoint. The third octet + holds the PSD reduction at the breakpoint from 0 + (0 dBm/Hz) to 255 (-127.5 dBm/Hz) using units of + 0.5 dBm/Hz." + SYNTAX OCTET STRING (SIZE (0..12)) + +Adsl2Tssi ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This is a structure that represents up to + 32 transmit spectrum shaping (TSSi) breakpoints. + Each breakpoint occupies 3 octets: The first + two octets hold the index of the sub-carrier + associated with the breakpoint. The third octet + holds the shaping parameter at the breakpoint. It + is a value from 0 to 127 (units of -0.5 dB). The + special value 127 indicates that the sub-carrier + is not transmitted." + SYNTAX OCTET STRING (SIZE (0..96)) + +Adsl2LastTransmittedState ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "This parameter represents the last successfully + transmitted initialization state in the last full + initialization performed on the line. States are + per the specific xDSL technology and are numbered + from 0 (if G.994.1 is used) or 1 (if G.994.1 is + not used) up to Showtime." + SYNTAX INTEGER { + atucG9941(0), + atucQuiet1(1), + atucComb1(2), + atucQuiet2(3), + atucComb2(4), + atucIcomb1(5), + atucLineprob(6), + atucQuiet3(7), + atucComb3(8), + atucIComb2(9), + atucMsgfmt(10), + atucMsgpcb(11), + atucQuiet4(12), + atucReverb1(13), + atucTref1(14), + atucReverb2(15), + atucEct(16), + atucReverb3(17), + atucTref2(18), + atucReverb4(19), + atucSegue1(20), + atucMsg1(21), + atucReverb5(22), + atucSegue2(23), + atucMedley(24), + atucExchmarker(25), + atucMsg2(26), + atucReverb6(27), + atucSegue3(28), + atucParams(29), + atucReverb7(30), + atucSegue4(31), + atucShowtime(32), + aturG9941(100), + aturQuiet1(101), + aturComb1(102), + aturQuiet2(103), + aturComb2(104), + aturIcomb1(105), + aturLineprob(106), + aturQuiet3(107), + aturComb3(108), + aturIcomb2(109), + aturMsgfmt(110), + aturMsgpcb(111), + aturReverb1(112), + aturQuiet4(113), + aturReverb2(114), + aturQuiet5(115), + aturReverb3(116), + aturEct(117), + aturReverb4(118), + aturSegue1(119), + aturReverb5(120), + aturSegue2(121), + aturMsg1(122), + aturMedley(123), + aturExchmarker(124), + aturMsg2(125), + aturReverb6(126), + aturSegue3(127), + aturParams(128), + aturReverb7(129), + aturSegue4(130), + aturShowtime(131) + } + +Adsl2LineStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are status parameters + that reflect the failure status for a given endpoint of + ADSL/ADSL2 or ADSL2+ link. + + This BITS structure can report the following failures: + + noDefect(0) - This bit position positively reports + that no defect or failure exists. + lossOfFrame(1) - Loss of frame synchronization. + lossOfSignal(2) - Loss of signal. + lossOfPower(3) - Loss of power. Usually this failure may + be reported for ATU-Rs only. + initFailure(4) - Recent initialization process failed. + Never active on ATU-R." + SYNTAX BITS { + noDefect(0), + lossOfFrame(1), + lossOfSignal(2), + lossOfPower(3), + initFailure(4) + } + +Adsl2ChAtmStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are status parameters that + reflect the failure status for Transmission Convergence (TC) + layer of a given ATM interface (data path over an ADSL/ADSL2 + or ADSL2+ link). + + This BITS structure can report the following failures: + noDefect(0) - This bit position positively + reports that no defect or failure + exists. + noCellDelineation(1) - The link was successfully + initialized, but cell delineation + was never acquired on the + associated ATM data path. + lossOfCellDelineation(2) - Loss of cell delineation on the + associated ATM data path." + SYNTAX BITS { + noDefect(0), + noCellDelineation(1), + lossOfCellDelineation(2) + } + +Adsl2ChPtmStatus ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Attributes with this syntax are status parameters that + reflect the failure status for a given PTM interface (packet + data path over an ADSL/ADSL2 or ADSL2+ link). + + This BITS structure can report the following failures: + noDefect(0) - This bit position positively + reports that no defect or failure exists. + outOfSync(1) - Out of synchronization." + SYNTAX BITS { + noDefect(0), + outOfSync(1) + } + +END + + + -- cgit v1.2.3